DUMPS
BASE
EXAM DUMPS
CWNP
CWDP-305
28% OFF Automatically For You
Certified Wireless Design Professional
,1.In an RSN requiring low-latency reassociations and no fast secure roaming
protocols, what security solutions are ideal for protecting VoWiFi communication?
(Choose all that apply.)
A. WPA2-Personal
B. WPA-Personal
C. WPA2-Enterprise
D. WEP
E. 802.1X/EAP
Answer: A B
2.To increase capacity in a coverage-based wireless network, which of the following
techniques are typically recommended? (Choose all that apply.)
s
as
A. Maximize airtime usage by disabling lower data rates.
P
ou
B. Add additional APs and use directional antennas.
Y
C. Turn up power on the access points.
p
el
H
D. Lower power on the access points and, after careful planning, add more AP
to
Answer: A B D
de
ui
G
dy
tu
3.Who should be in the final meeting from the customer-side after successfully
S
ht
implementing a WLAN infrastructure?
ig
-R
A. CEO or CFO
)
02
B. End-users
8.
(V
C. The customer's customers
ps
D. Remote workers
um
Answer: B
D
05
-3
P
D
W
4.SSID hiding is not generally recommended because some frames require inclusion
C
ic
of the SSID. In what frames is the SSID always included?
nt
he
A. Beacon
ut
A
B. Association request
C. Probe response
D. Probe request
E. Authentication response
Answer: B
5.Given: You are evaluating the theoretical and real-world RF gain benefits of transmit
and receive features introduced by 802.11 with MIMO. This exercise allows you to
quantify the features value in a real-world environment.
What is the maximum theoretical signal gain of chip-based TxBF and MRC (as
, features) when compared to the same AP using only a single antenna for transmit
and receive (effectively simulating a 1x1 chip)?
A. 2 Rx or Tx chains = 3 dBi gain 3 Rx or Tx chains = approx 5 dBi gain 4 Rx or Tx
chains = 6 dBi gain
B. 2 Rx or Tx chains = 1 dBi gain 3 Rx or Tx chains = 2 dBi gain 4 Rx or Tx chains = 3
dBi gain
C. 2 Rx or Tx chains = 3 dBi gain 3 Rx or Tx chains = 6 dBi gain 4 Rx or Tx chains = 9
dBi gain
D. 2 Rx or Tx chains = approx 4-6.5 dBi gain 3 Rx or Tx chains = approx 7-10 dBi
gain
Answer: D
s
as
6.What functions may be performed by a WIPS? (Choose all that apply.)
P
ou
A. Distributed protocol analysis
Y
B. Client access to the distribution system
p
el
H
C. Performance monitoring and response
to
D. Data forensics and analysis
de
ui
E. Automated threat mitigation G
dy
Answer: A C D E
tu
S
ht
ig
-R
7.What are the two types of WLAN discovery/scanning?
)
02
A. Manual
8.
(V
B. Hidden
ps
C. Active
um
D. Passive
D
05
E. Probe
-3
P
F. Automatic
D
W
Answer: C D
C
ic
nt
he
ut
A
8.A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have
the APs blend into the design of the museum.
What should you do to meet this requirement?
A. Use a plastic cover that could blend in with the environment
B. Lock the AP inside of a metal box
C. Place the APs in between walls and I-beams
D. Use an 802.11b AP, so it looks old enough to be in a museum
Answer: A
9.What architecture suffers the biggest limitation for sharing control information
BASE
EXAM DUMPS
CWNP
CWDP-305
28% OFF Automatically For You
Certified Wireless Design Professional
,1.In an RSN requiring low-latency reassociations and no fast secure roaming
protocols, what security solutions are ideal for protecting VoWiFi communication?
(Choose all that apply.)
A. WPA2-Personal
B. WPA-Personal
C. WPA2-Enterprise
D. WEP
E. 802.1X/EAP
Answer: A B
2.To increase capacity in a coverage-based wireless network, which of the following
techniques are typically recommended? (Choose all that apply.)
s
as
A. Maximize airtime usage by disabling lower data rates.
P
ou
B. Add additional APs and use directional antennas.
Y
C. Turn up power on the access points.
p
el
H
D. Lower power on the access points and, after careful planning, add more AP
to
Answer: A B D
de
ui
G
dy
tu
3.Who should be in the final meeting from the customer-side after successfully
S
ht
implementing a WLAN infrastructure?
ig
-R
A. CEO or CFO
)
02
B. End-users
8.
(V
C. The customer's customers
ps
D. Remote workers
um
Answer: B
D
05
-3
P
D
W
4.SSID hiding is not generally recommended because some frames require inclusion
C
ic
of the SSID. In what frames is the SSID always included?
nt
he
A. Beacon
ut
A
B. Association request
C. Probe response
D. Probe request
E. Authentication response
Answer: B
5.Given: You are evaluating the theoretical and real-world RF gain benefits of transmit
and receive features introduced by 802.11 with MIMO. This exercise allows you to
quantify the features value in a real-world environment.
What is the maximum theoretical signal gain of chip-based TxBF and MRC (as
, features) when compared to the same AP using only a single antenna for transmit
and receive (effectively simulating a 1x1 chip)?
A. 2 Rx or Tx chains = 3 dBi gain 3 Rx or Tx chains = approx 5 dBi gain 4 Rx or Tx
chains = 6 dBi gain
B. 2 Rx or Tx chains = 1 dBi gain 3 Rx or Tx chains = 2 dBi gain 4 Rx or Tx chains = 3
dBi gain
C. 2 Rx or Tx chains = 3 dBi gain 3 Rx or Tx chains = 6 dBi gain 4 Rx or Tx chains = 9
dBi gain
D. 2 Rx or Tx chains = approx 4-6.5 dBi gain 3 Rx or Tx chains = approx 7-10 dBi
gain
Answer: D
s
as
6.What functions may be performed by a WIPS? (Choose all that apply.)
P
ou
A. Distributed protocol analysis
Y
B. Client access to the distribution system
p
el
H
C. Performance monitoring and response
to
D. Data forensics and analysis
de
ui
E. Automated threat mitigation G
dy
Answer: A C D E
tu
S
ht
ig
-R
7.What are the two types of WLAN discovery/scanning?
)
02
A. Manual
8.
(V
B. Hidden
ps
C. Active
um
D. Passive
D
05
E. Probe
-3
P
F. Automatic
D
W
Answer: C D
C
ic
nt
he
ut
A
8.A museum wants to offer Wi-Fi to its visitors. One of their requirements is to have
the APs blend into the design of the museum.
What should you do to meet this requirement?
A. Use a plastic cover that could blend in with the environment
B. Lock the AP inside of a metal box
C. Place the APs in between walls and I-beams
D. Use an 802.11b AP, so it looks old enough to be in a museum
Answer: A
9.What architecture suffers the biggest limitation for sharing control information
