CIP Level 2 NACE-CIP2-001 Practice
Test Questions and Answers Best
rated A+ Guaranteed Success Latest
Update
You are the NACE Coating Inspector on a tank lining project and are asked to perform a
high voltage holiday test after the coating applicators have completed their final repairs.
After meeting all the confined space entry permit you enter the tank and notice a very
strong odor of solvent.
Your first course of action should to: - CORRECT ANSWER-A. Investigate to find the
source of the odor
B. Don your air supplied respirator and continue the testing
C. Exit the tank and immediately and report the problem to the nearest safety supervisor
D. Exit the tank and document the incident in your daily report
Answer: C
You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of: - CORRECT ANSWER-A. Risk
of chemical exposure
B. Risk of skin
C. Risk of acid or caustic splashes
D. a), b), and c)
Answer: D
You are working as the only in-house NACE Level 2 Inspector in a shop setting when
an independent 3rd party NACE Level 3 Inspector, representing the owner, presents
you with a copy of a Non Conformance Report (NCR) he has written for a
NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to: - CORRECT ANSWER-A. Verbally
challenge the NCR
B. Request a re-blast of the item in question
C. Consult your supervisor
D. Review the NCR with the other Inspector
Answer: C
CIP Level 2 NACE-CIP2-001 - Coatings Inspector Program Level 2 - CORRECT
ANSWER-CIP Level 2 focuses on advanced inspection techniques and specialized
application methods for both steel and non-steel substrates, including concrete using
both nondestructive and destructive techniques. Surface preparation, coating types,
Test Questions and Answers Best
rated A+ Guaranteed Success Latest
Update
You are the NACE Coating Inspector on a tank lining project and are asked to perform a
high voltage holiday test after the coating applicators have completed their final repairs.
After meeting all the confined space entry permit you enter the tank and notice a very
strong odor of solvent.
Your first course of action should to: - CORRECT ANSWER-A. Investigate to find the
source of the odor
B. Don your air supplied respirator and continue the testing
C. Exit the tank and immediately and report the problem to the nearest safety supervisor
D. Exit the tank and document the incident in your daily report
Answer: C
You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of: - CORRECT ANSWER-A. Risk
of chemical exposure
B. Risk of skin
C. Risk of acid or caustic splashes
D. a), b), and c)
Answer: D
You are working as the only in-house NACE Level 2 Inspector in a shop setting when
an independent 3rd party NACE Level 3 Inspector, representing the owner, presents
you with a copy of a Non Conformance Report (NCR) he has written for a
NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to: - CORRECT ANSWER-A. Verbally
challenge the NCR
B. Request a re-blast of the item in question
C. Consult your supervisor
D. Review the NCR with the other Inspector
Answer: C
CIP Level 2 NACE-CIP2-001 - Coatings Inspector Program Level 2 - CORRECT
ANSWER-CIP Level 2 focuses on advanced inspection techniques and specialized
application methods for both steel and non-steel substrates, including concrete using
both nondestructive and destructive techniques. Surface preparation, coating types,
