ICC REINFORCED CONCRETE FINAL EXAM
TEST EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST 2025 - 2026
ALREADY GRADED A+
________ portland cement provides high early strength
when necessary.
-type III
- Type IA
- type IV
-type V - ANSWERS-type III
when a high degree of sulfate resistance is required,
portland cement __________ should be used.
-type II
-type III
-type IV
-type V - ANSWERS-type V
,specified compressive strength requirements shall be based
on?
-compression test cylinders
-laboratory experience
-an approved mix design
-flexural beam samples - ANSWERS-an approved mix design
beams, girders or slabs supported by columns or walls shall
not be erected untill the concrete in the vertical members
-has hardened to 80% of the design f'c
-is stripped of forms
-has sufficient strength to support its weight and loads
placed thereon
-is with 10% of the design f'c - ANSWERS-has sufficient
strength to support its weight and the loads placed thereon
without considering tolerances, reinforcing steel placed in
concrete cast against and permanently exposed to earth
have a minimum concrete cover of.
-3 inches
-2 inches
, 1-1/2 inches
4 inches - ANSWERS-3 inches
The__________may waive requirements for the
employment of a special inspection agency if he/she finds
that the construction is of minor nature.
-building official
-engineer or architect of record
-owner
-all of the above - ANSWERS-building official
An acceptable reinforcing steel support mechanism for a 24-
inch deep footing are?
-precast dobie blocks
-large,solid pieces of glass
-masonry CMU pieces
-wooden blocks - ANSWERS-Precast dobie blocks
all of the following are true except ?
---Minimum concrete cover for bundled bars of any size
need not be greater than 2 inches, unless they are in a
member that's permanently cast against earth
TEST EXAM WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL
DEFINED ANSWERS LATEST 2025 - 2026
ALREADY GRADED A+
________ portland cement provides high early strength
when necessary.
-type III
- Type IA
- type IV
-type V - ANSWERS-type III
when a high degree of sulfate resistance is required,
portland cement __________ should be used.
-type II
-type III
-type IV
-type V - ANSWERS-type V
,specified compressive strength requirements shall be based
on?
-compression test cylinders
-laboratory experience
-an approved mix design
-flexural beam samples - ANSWERS-an approved mix design
beams, girders or slabs supported by columns or walls shall
not be erected untill the concrete in the vertical members
-has hardened to 80% of the design f'c
-is stripped of forms
-has sufficient strength to support its weight and loads
placed thereon
-is with 10% of the design f'c - ANSWERS-has sufficient
strength to support its weight and the loads placed thereon
without considering tolerances, reinforcing steel placed in
concrete cast against and permanently exposed to earth
have a minimum concrete cover of.
-3 inches
-2 inches
, 1-1/2 inches
4 inches - ANSWERS-3 inches
The__________may waive requirements for the
employment of a special inspection agency if he/she finds
that the construction is of minor nature.
-building official
-engineer or architect of record
-owner
-all of the above - ANSWERS-building official
An acceptable reinforcing steel support mechanism for a 24-
inch deep footing are?
-precast dobie blocks
-large,solid pieces of glass
-masonry CMU pieces
-wooden blocks - ANSWERS-Precast dobie blocks
all of the following are true except ?
---Minimum concrete cover for bundled bars of any size
need not be greater than 2 inches, unless they are in a
member that's permanently cast against earth
