1
For Expert help and assignment solutions, +254707240657
Limited scope of radiography practice
exam Questions and Answers (100%
Correct Answers) Already Graded A+
PQM 101 - Production, Quality and Manufacturing Fundamentals
Questions and Answers (100% Correct Answers) Already Graded
A+
© 2025 Assignment Expert
Identify the item that is not a characteristic of a mature process.—
Ans: The process requires further process engineering
Guru01 - Stuvia
improvements.
Establishing manufacturing capabilities focuses on— Ans:
manufacturing process planning and production resource
planning.
Producibility Engineering and Planning focuses on key processess
and key product characteristics as well as:— Ans: Identifying any
new processes or materials as soon as possible and planning
development concurrently with the product design.
Integrated Management Planning (IMP) is __________________.—
Ans: the merging of manufacturing and production planning and
development activities and quality practices
Four keys to achieving quality are:— Ans: Quality of design,
conformance to requirements, fitness for use, and cost.
Identify the key element(s) necessary to achieve quality products
and services when performing quality assurance planning.— Ans:
All of the choices apply
, 2
For Expert help and assignment solutions, +254707240657
Select a manufacturing metric that applies during Production.—
Ans: Process variance data used to monitor and maintain process
capability
What is a group of activities that address process and product
design and system engineering?— Ans: Manufacturing
Engineering
Preparing finished products for shipment to the customer is:— Ans:
Packaging
Which of the following might be considered a key product
characteristic of a work boot? Check all that apply:— Ans: Sole
durability
© 2025 Assignment Expert
Sole traction
Steel toe thickness
Verification that the key processes are achieving the key product
Guru01 - Stuvia
characteristics is accomplished by conducting which of the
following?— Ans: Dedicated process demonstrations
A key step in the control system methodology is:— Ans: Decide if
corrective action is warranted
What processes are responsible for achieving key product
characteristics?— Ans: Key Processes
Which of the following is NOT an example of a material
management approach (Push or Pull system)?— Ans: DFARS
What measurement is used to judge the quality of incoming
material from a particular supplier?— Ans: Purchased materials
acceptance rate
What is the production control method most often used in
industries that process liquid or gaseous materials?— Ans: Flow
Control
What is a document that lists all of the assemblies, parts, and
components that make up the final product?— Ans: Bill-of-
material
, 3
For Expert help and assignment solutions, +254707240657
Why are quality systems developed?— Ans: Because technical
specifications alone do not guarantee that the customer's
requirements will be consistently met
A company wants to manufacture a closet door that has the
following specifications: Height: 7'1", Width: 2'6", and Thickness: 1
5/8". Which of the doors below meet the manufacturer
specifications?— Ans: Height: 7'1", Width: 2'6", and Thickness: 1
5/8"
Which of the following is NOT one of the steps when applying the
"Concept of Control Systems"?— Ans: Set an arbitrary value
Which process may be used to verify that identified key processes
© 2025 Assignment Expert
are achieving the associated key product characteristics?— Ans:
Review of test article experience and process demonstrations.
What type of Material Management System is "Just-In-Time"?—
Ans: Pull System
Guru01 - Stuvia
Which of the following describes the DOD policy regarding a
contractor's selection and use of a quality system?— Ans:
Contractors may be allowed to develop their own quality systems
that meet contractual requirements; they are not restricted only to
ISO/ANSI/ASQ 9000 criteria.
What is continuous process improvement?— Ans: All of the
above
What confirms the actions taken to achieve the target?— Ans:
Study Results
What is a quick and easy way for a group to prioritize large lists
without creating a "win/lose" situation?— Ans: Multi-voting
The Pareto Chart can be best described as:— Ans: all of the
above
Which tool uses either a tabular and/or pictorial depiction of the
collected data?— Ans: Check Sheet
What is the difference between a histogram and a scatter
diagram ?— Ans: Answers A and C.
For Expert help and assignment solutions, +254707240657
Limited scope of radiography practice
exam Questions and Answers (100%
Correct Answers) Already Graded A+
PQM 101 - Production, Quality and Manufacturing Fundamentals
Questions and Answers (100% Correct Answers) Already Graded
A+
© 2025 Assignment Expert
Identify the item that is not a characteristic of a mature process.—
Ans: The process requires further process engineering
Guru01 - Stuvia
improvements.
Establishing manufacturing capabilities focuses on— Ans:
manufacturing process planning and production resource
planning.
Producibility Engineering and Planning focuses on key processess
and key product characteristics as well as:— Ans: Identifying any
new processes or materials as soon as possible and planning
development concurrently with the product design.
Integrated Management Planning (IMP) is __________________.—
Ans: the merging of manufacturing and production planning and
development activities and quality practices
Four keys to achieving quality are:— Ans: Quality of design,
conformance to requirements, fitness for use, and cost.
Identify the key element(s) necessary to achieve quality products
and services when performing quality assurance planning.— Ans:
All of the choices apply
, 2
For Expert help and assignment solutions, +254707240657
Select a manufacturing metric that applies during Production.—
Ans: Process variance data used to monitor and maintain process
capability
What is a group of activities that address process and product
design and system engineering?— Ans: Manufacturing
Engineering
Preparing finished products for shipment to the customer is:— Ans:
Packaging
Which of the following might be considered a key product
characteristic of a work boot? Check all that apply:— Ans: Sole
durability
© 2025 Assignment Expert
Sole traction
Steel toe thickness
Verification that the key processes are achieving the key product
Guru01 - Stuvia
characteristics is accomplished by conducting which of the
following?— Ans: Dedicated process demonstrations
A key step in the control system methodology is:— Ans: Decide if
corrective action is warranted
What processes are responsible for achieving key product
characteristics?— Ans: Key Processes
Which of the following is NOT an example of a material
management approach (Push or Pull system)?— Ans: DFARS
What measurement is used to judge the quality of incoming
material from a particular supplier?— Ans: Purchased materials
acceptance rate
What is the production control method most often used in
industries that process liquid or gaseous materials?— Ans: Flow
Control
What is a document that lists all of the assemblies, parts, and
components that make up the final product?— Ans: Bill-of-
material
, 3
For Expert help and assignment solutions, +254707240657
Why are quality systems developed?— Ans: Because technical
specifications alone do not guarantee that the customer's
requirements will be consistently met
A company wants to manufacture a closet door that has the
following specifications: Height: 7'1", Width: 2'6", and Thickness: 1
5/8". Which of the doors below meet the manufacturer
specifications?— Ans: Height: 7'1", Width: 2'6", and Thickness: 1
5/8"
Which of the following is NOT one of the steps when applying the
"Concept of Control Systems"?— Ans: Set an arbitrary value
Which process may be used to verify that identified key processes
© 2025 Assignment Expert
are achieving the associated key product characteristics?— Ans:
Review of test article experience and process demonstrations.
What type of Material Management System is "Just-In-Time"?—
Ans: Pull System
Guru01 - Stuvia
Which of the following describes the DOD policy regarding a
contractor's selection and use of a quality system?— Ans:
Contractors may be allowed to develop their own quality systems
that meet contractual requirements; they are not restricted only to
ISO/ANSI/ASQ 9000 criteria.
What is continuous process improvement?— Ans: All of the
above
What confirms the actions taken to achieve the target?— Ans:
Study Results
What is a quick and easy way for a group to prioritize large lists
without creating a "win/lose" situation?— Ans: Multi-voting
The Pareto Chart can be best described as:— Ans: all of the
above
Which tool uses either a tabular and/or pictorial depiction of the
collected data?— Ans: Check Sheet
What is the difference between a histogram and a scatter
diagram ?— Ans: Answers A and C.
