ELECTRICIAN'S LICENSING EXAM| ACTUAL Q &
VERIFIED VERIFIED ANS >> WERS LATEST 2025
NEC Article defines breakers and fuses. - VERIFIED ANS >> According to
NEC Article 100, a device that opens and closes a circuit by nonautomatic me verified
ans >> automatically closes for a predetermined overcurrent.
Annex of NEC covers conduit fill. - VERIFIED ANS >> Annex C of NEC covers
conduit and tubing fill for conductors and fixture wire fill.
NEMA stands for National Electrical Manufacturers Association - VERIFIED ANS >> True -
NEMA is the acronym for National Electrical Manufacturers Association.
What does it mean when a receptacle has "NEMA 5-20R" on it? - VERIFIED ANS >> A
receptacle with NEMA 5-20R on it has an amperes rating of 20, will take a NEMA-5-15P
or NEMA-5-20P plug, and has a voltage rating of 125.
NEC Tables 310-10 through 310-21 provide information on. - VERIFIED ANS >> The
sizes of copper and aluminum wire, as well as the coating of wire that has fewer than three
current carrying wires in a cable or conduit or that is buried in the earth.
Which NEC tables(s) cover(s) the fill of metal boxes? - VERIFIED ANS >> The fill of metal
boxes appears in NEC Tables 314.6 A and B.
NEC Article address EMT. - VERIFIED ANS >> NEC Article 358 covers EMT.
Which NEC articles cover the installation requirements for RMC, IMC, and EMT? -
VERIFIED ANS >> NEC Articles 342, 344, and 358 outline the installation requirements of
RMC, IMC, and EMT.
IN NEC 2008, what does Table 370.6A cover? - VERIFIED ANS >> Shows in two columns
(milimeters and inches), how many wires in trade size you can place in a box.
,What NEC table would you go to to find trade size of conduit and raceway size? -
VERIFIED ANS >> Chapter 9, Table 4 outlines trade size of conduit as well as
raceway size.
NEC Articles and covers metallic and non-metallic raceways in buildings. -
VERIFIED ANS >> NEC Article 386 covers metallic or metal raceway; NEC Article 388
covers PVC pipe.
The Panel Board requirements for Application in Construction appear in NEC Article? -
VERIFIED ANS >> NEC Article 408 covers panel board applications.
The smaller kitchen counter requiring a receptacle is inches. - VERIFIED ANS
>> A 12in. counter requires a receptacle because it holds small appliances.
What new code is needed for protection in all habitable spaces? - VERIFIED ANS >>
According to new codes, ARC fault protection is needed many additional parts of the house.
,A 12-foot hallway requires one receptacle to meet code. (True or False) - VERIFIED ANS
>> True, One is required, Two are suggested.
NEC Article 100 is dedicated to? - VERIFIED ANS >> Definitions
The main ground on a service is a(n) . - VERIFIED ANS >> Ground Rod
What does NEC Section 250-28A require? - VERIFIED ANS >> A main bonding jumper
and a system bonding jumper.
NEC section 250-28A provides information on what material can be used for a main bonding
jumper. (True or False) - VERIFIED ANS >> True
A bonding screw is what color? - VERIFIED ANS >> A bonding screw is green.
A subpanel requires a bonding screw? (True or False) - VERIFIED ANS >> False, A
bonding screw is unneeded in a subpanel.
Name the methods of sizing bonding jumpers outlined in NEC Section 250-28D. -
VERIFIED ANS >> 1. Bonding jumper is sized not less than 12.5% of the largest phase
conductor.
2. Based on the largest ungrounded service conductor.
3. Based on the largest sum of the service conductors.
NEC Table ______ covers grounding electrode conductor sizing. - VERIFIED ANS >> NEC
Table 250.66
Which NEC reference identifies wire sizing and the temperature a wire can handle in amps?
- VERIFIED ANS >> NEC Tables Annex C1 and C2 identify both wire sizing and the
temperature a wire can handle in amps.
, Define na ngrounding nsystem naccording nto nNEC. n- n nVERIFIED nANS n>> nA ngounding nsystem
nis nconnected nto nthe nground nor nto na nconductive nbody nthat nextends nthe nground nconnection.
What nis nthe ntopic nof nNEC nSection n250-122? n- n nVERIFIED nANS n>> nIs ndedicated nto nthe
nsizes nof nthe ngrounding nconductor
What nis nthe nNEC ndefinition nof na ncircuit nbreaker? n- n nVERIFIED nANS n>> nA ndevice ndesigned
nto ntrip nwhen nan novercurrent nis ndetected.
NEC nSection n300-13 nprovides ninformation non? n- n nVERIFIED nANS n>> nMechanical nand
nElectrical ncontinuity nconductors.
What nis nthe nsubject nof nNEC nSection n250-2D? n- n nVERIFIED nANS n>> nBonding njumpers
are nthe nsubject nof nNEC nSection n680-20. n- n nVERIFIED nANS n>> nElectrical
installations nat npermanently ninstalled npools.
n
VERIFIED VERIFIED ANS >> WERS LATEST 2025
NEC Article defines breakers and fuses. - VERIFIED ANS >> According to
NEC Article 100, a device that opens and closes a circuit by nonautomatic me verified
ans >> automatically closes for a predetermined overcurrent.
Annex of NEC covers conduit fill. - VERIFIED ANS >> Annex C of NEC covers
conduit and tubing fill for conductors and fixture wire fill.
NEMA stands for National Electrical Manufacturers Association - VERIFIED ANS >> True -
NEMA is the acronym for National Electrical Manufacturers Association.
What does it mean when a receptacle has "NEMA 5-20R" on it? - VERIFIED ANS >> A
receptacle with NEMA 5-20R on it has an amperes rating of 20, will take a NEMA-5-15P
or NEMA-5-20P plug, and has a voltage rating of 125.
NEC Tables 310-10 through 310-21 provide information on. - VERIFIED ANS >> The
sizes of copper and aluminum wire, as well as the coating of wire that has fewer than three
current carrying wires in a cable or conduit or that is buried in the earth.
Which NEC tables(s) cover(s) the fill of metal boxes? - VERIFIED ANS >> The fill of metal
boxes appears in NEC Tables 314.6 A and B.
NEC Article address EMT. - VERIFIED ANS >> NEC Article 358 covers EMT.
Which NEC articles cover the installation requirements for RMC, IMC, and EMT? -
VERIFIED ANS >> NEC Articles 342, 344, and 358 outline the installation requirements of
RMC, IMC, and EMT.
IN NEC 2008, what does Table 370.6A cover? - VERIFIED ANS >> Shows in two columns
(milimeters and inches), how many wires in trade size you can place in a box.
,What NEC table would you go to to find trade size of conduit and raceway size? -
VERIFIED ANS >> Chapter 9, Table 4 outlines trade size of conduit as well as
raceway size.
NEC Articles and covers metallic and non-metallic raceways in buildings. -
VERIFIED ANS >> NEC Article 386 covers metallic or metal raceway; NEC Article 388
covers PVC pipe.
The Panel Board requirements for Application in Construction appear in NEC Article? -
VERIFIED ANS >> NEC Article 408 covers panel board applications.
The smaller kitchen counter requiring a receptacle is inches. - VERIFIED ANS
>> A 12in. counter requires a receptacle because it holds small appliances.
What new code is needed for protection in all habitable spaces? - VERIFIED ANS >>
According to new codes, ARC fault protection is needed many additional parts of the house.
,A 12-foot hallway requires one receptacle to meet code. (True or False) - VERIFIED ANS
>> True, One is required, Two are suggested.
NEC Article 100 is dedicated to? - VERIFIED ANS >> Definitions
The main ground on a service is a(n) . - VERIFIED ANS >> Ground Rod
What does NEC Section 250-28A require? - VERIFIED ANS >> A main bonding jumper
and a system bonding jumper.
NEC section 250-28A provides information on what material can be used for a main bonding
jumper. (True or False) - VERIFIED ANS >> True
A bonding screw is what color? - VERIFIED ANS >> A bonding screw is green.
A subpanel requires a bonding screw? (True or False) - VERIFIED ANS >> False, A
bonding screw is unneeded in a subpanel.
Name the methods of sizing bonding jumpers outlined in NEC Section 250-28D. -
VERIFIED ANS >> 1. Bonding jumper is sized not less than 12.5% of the largest phase
conductor.
2. Based on the largest ungrounded service conductor.
3. Based on the largest sum of the service conductors.
NEC Table ______ covers grounding electrode conductor sizing. - VERIFIED ANS >> NEC
Table 250.66
Which NEC reference identifies wire sizing and the temperature a wire can handle in amps?
- VERIFIED ANS >> NEC Tables Annex C1 and C2 identify both wire sizing and the
temperature a wire can handle in amps.
, Define na ngrounding nsystem naccording nto nNEC. n- n nVERIFIED nANS n>> nA ngounding nsystem
nis nconnected nto nthe nground nor nto na nconductive nbody nthat nextends nthe nground nconnection.
What nis nthe ntopic nof nNEC nSection n250-122? n- n nVERIFIED nANS n>> nIs ndedicated nto nthe
nsizes nof nthe ngrounding nconductor
What nis nthe nNEC ndefinition nof na ncircuit nbreaker? n- n nVERIFIED nANS n>> nA ndevice ndesigned
nto ntrip nwhen nan novercurrent nis ndetected.
NEC nSection n300-13 nprovides ninformation non? n- n nVERIFIED nANS n>> nMechanical nand
nElectrical ncontinuity nconductors.
What nis nthe nsubject nof nNEC nSection n250-2D? n- n nVERIFIED nANS n>> nBonding njumpers
are nthe nsubject nof nNEC nSection n680-20. n- n nVERIFIED nANS n>> nElectrical
installations nat npermanently ninstalled npools.
n
