1|Page
NFPA 24 Test (TFM10) Exam Newest 2025/ 2026
Complete All Questions And Correct Detailed Answers
(Verified Answers) |Already Graded A+||Newest
Version!!!
This standard shall apply to ______ intended to carry
water for fire service mains - Answer-Combined Service
Mains
The Standard shall cover the minimum requirements for
the installation of private service mains and their
appurtenances, which include the following - Answer--
Automatic Sprinkler Systems
-Open Sprinkler Systems
-Water Spray Fixed Systems
-Foam Systems
-Private Hydrants
-Monitor Nozzles or Standpipe Systems with reference to
water supplies
-Hose Houses
This standard shall NOT apply to the following situations -
Answer--Mains under the control of a water utility
, 2|Page
-Mains providing fire protection and/or domestic water that
are privately owned but are operated as a water utility
Residual Pressure - Answer-The pressure that exists in
the distribution system, measured at the residual hydrant
at the time the flow readings are taken at the flow
hydrants.
Static Pressure - Answer-The pressure that exists at a
given point under normal distribution system conditions
measured at the residual hydrant with no hydrants flowing.
Flow Test - Answer-A test performed by the flow and
measurement of water from one hydrant and the static and
residual pressures from an adjacent hydrant for the
purpose of determining the available water supply at that
location.
Flushing Test - Answer-A test of a piping system using
high velocity flows to remove debris from the piping
system prior to it being placed in service
NFPA 24 Test (TFM10) Exam Newest 2025/ 2026
Complete All Questions And Correct Detailed Answers
(Verified Answers) |Already Graded A+||Newest
Version!!!
This standard shall apply to ______ intended to carry
water for fire service mains - Answer-Combined Service
Mains
The Standard shall cover the minimum requirements for
the installation of private service mains and their
appurtenances, which include the following - Answer--
Automatic Sprinkler Systems
-Open Sprinkler Systems
-Water Spray Fixed Systems
-Foam Systems
-Private Hydrants
-Monitor Nozzles or Standpipe Systems with reference to
water supplies
-Hose Houses
This standard shall NOT apply to the following situations -
Answer--Mains under the control of a water utility
, 2|Page
-Mains providing fire protection and/or domestic water that
are privately owned but are operated as a water utility
Residual Pressure - Answer-The pressure that exists in
the distribution system, measured at the residual hydrant
at the time the flow readings are taken at the flow
hydrants.
Static Pressure - Answer-The pressure that exists at a
given point under normal distribution system conditions
measured at the residual hydrant with no hydrants flowing.
Flow Test - Answer-A test performed by the flow and
measurement of water from one hydrant and the static and
residual pressures from an adjacent hydrant for the
purpose of determining the available water supply at that
location.
Flushing Test - Answer-A test of a piping system using
high velocity flows to remove debris from the piping
system prior to it being placed in service
