Printreading Residential & Light
Commercial Construction
(A) 1% to two% - ANS-A _____ waste allowance is introduced to concrete calculations to
permit concrete spillage during placement.
(A) Solid - ANS-Finished grade is proven on the plot plan with _______ contour traces.
(A) W ; D - ANS-When relating to welded twine reinforcement, the letter "__" is used to
designate easy twine ant the letter "__" is used to designate deformed twine.
(B) 1/four" = 1'-zero" - ANS-The most usually used scale for running drawings is
____________.
(B) Area - ANS-The quantity of welded twine reinforcement required is based at the slab
________.
(B) Floor plans - ANS-Cutting planes for sections are generally shown on __________.
(B) match - ANS-A ___________ line is an aligning mark on a print that is used while a
drawing is too massive to be contained on one sheet.
(B) now not protected inside the contract - ANS-The abbreviation "NIC" manner
___________.
(B) Square toes - ANS-Hardwood flooring and tile amount takeoffs are generally calculated
in ___________.
(B) rectangular foot - ANS-Snap tie quantities are calculated as a detailed number of ties in
step with ___________.
(B) structural dealing with - ANS-A _________ tile is a clay masonry unit with one face
colored and glazed and is used for load bearing applications.
(C) one hundred twenty - ANS-A _______ degree angle is fashioned among the axes in
isometric drawings.
(C) Glued laminated wood (glulam) - ANS-____________ is an engineered wooden product
comprised of layers of wood participants which can be joined collectively with adhesive to
shape larger contributors.
(C) rectangular - ANS-The pass segment approach of calculating the extent of cloth to be
excavated from a website is used while the shape of the excavated area is _____.
, (C) Rubble - ANS-___________ is rough, irregular stone that is used as fill to provide a
rustic appearance.
(C) takeoff - ANS-A ____________ is the exercise of reviewing agreement files simplest to
determine portions of fabric to be included in a bid.
(C) triangular - ANS-A cant strip is ____________ in pass section.
(C) Underslung - ANS-An _________ truss is a roof or ground truss that is supported with
the aid of the top chord.
(D) All of the above
accelerator, superplasterizer, retarder - ANS-A ________ may be introduced to concrete as
an admixture.
1 half" x three half" - ANS-The actual length of a 2x4 stud is ___________.
Half - ANS-The notation #four @ 15" indicates ___" rebar spaced 15" apart.
12'-0" - ANS-Based on the National Electrical Code, electrical wall retailers should be
spaced no more then ____________ apart, measured along the wall.
34 - ANS-A W14 x 34 steel beam weighs _____ pound per running foot.
Four : eight - ANS-A typical sheet of wooden paneling measures ___' perpendicular to the
direction of the grain and ___' parallel to the path of the grain.
Benchmarks - ANS-The survey drawing gives a means of figuring out elevations from datum
points or __________.
Berm - ANS-A raised earth embankment is a ________.
Channels - ANS-When set up alongside the lowest edges of ground joints, resilient furring
__________ lessen the sound transmission between adjoining floors.
Codes - ANS-Building ________ specify kinds of materials that should be used for specific
elements of creation.
Common - ANS-Building brick is likewise known as _________ brick.
Corbel - ANS-A _________ is a brick ledge designed to guide a load.
Details - ANS-_________ are drawn to a bigger scale to show the item extra truly.
Door agenda - ANS-A __________ affords complete statistics on the type and size of doors
exact.
Commercial Construction
(A) 1% to two% - ANS-A _____ waste allowance is introduced to concrete calculations to
permit concrete spillage during placement.
(A) Solid - ANS-Finished grade is proven on the plot plan with _______ contour traces.
(A) W ; D - ANS-When relating to welded twine reinforcement, the letter "__" is used to
designate easy twine ant the letter "__" is used to designate deformed twine.
(B) 1/four" = 1'-zero" - ANS-The most usually used scale for running drawings is
____________.
(B) Area - ANS-The quantity of welded twine reinforcement required is based at the slab
________.
(B) Floor plans - ANS-Cutting planes for sections are generally shown on __________.
(B) match - ANS-A ___________ line is an aligning mark on a print that is used while a
drawing is too massive to be contained on one sheet.
(B) now not protected inside the contract - ANS-The abbreviation "NIC" manner
___________.
(B) Square toes - ANS-Hardwood flooring and tile amount takeoffs are generally calculated
in ___________.
(B) rectangular foot - ANS-Snap tie quantities are calculated as a detailed number of ties in
step with ___________.
(B) structural dealing with - ANS-A _________ tile is a clay masonry unit with one face
colored and glazed and is used for load bearing applications.
(C) one hundred twenty - ANS-A _______ degree angle is fashioned among the axes in
isometric drawings.
(C) Glued laminated wood (glulam) - ANS-____________ is an engineered wooden product
comprised of layers of wood participants which can be joined collectively with adhesive to
shape larger contributors.
(C) rectangular - ANS-The pass segment approach of calculating the extent of cloth to be
excavated from a website is used while the shape of the excavated area is _____.
, (C) Rubble - ANS-___________ is rough, irregular stone that is used as fill to provide a
rustic appearance.
(C) takeoff - ANS-A ____________ is the exercise of reviewing agreement files simplest to
determine portions of fabric to be included in a bid.
(C) triangular - ANS-A cant strip is ____________ in pass section.
(C) Underslung - ANS-An _________ truss is a roof or ground truss that is supported with
the aid of the top chord.
(D) All of the above
accelerator, superplasterizer, retarder - ANS-A ________ may be introduced to concrete as
an admixture.
1 half" x three half" - ANS-The actual length of a 2x4 stud is ___________.
Half - ANS-The notation #four @ 15" indicates ___" rebar spaced 15" apart.
12'-0" - ANS-Based on the National Electrical Code, electrical wall retailers should be
spaced no more then ____________ apart, measured along the wall.
34 - ANS-A W14 x 34 steel beam weighs _____ pound per running foot.
Four : eight - ANS-A typical sheet of wooden paneling measures ___' perpendicular to the
direction of the grain and ___' parallel to the path of the grain.
Benchmarks - ANS-The survey drawing gives a means of figuring out elevations from datum
points or __________.
Berm - ANS-A raised earth embankment is a ________.
Channels - ANS-When set up alongside the lowest edges of ground joints, resilient furring
__________ lessen the sound transmission between adjoining floors.
Codes - ANS-Building ________ specify kinds of materials that should be used for specific
elements of creation.
Common - ANS-Building brick is likewise known as _________ brick.
Corbel - ANS-A _________ is a brick ledge designed to guide a load.
Details - ANS-_________ are drawn to a bigger scale to show the item extra truly.
Door agenda - ANS-A __________ affords complete statistics on the type and size of doors
exact.
