ATT Week 11 Test (FC)
__________ determines the colour of mild. - ANS-Wavelength
___________ is the effect of sign loss related to excessive frequency currents flowing close
to the outer surface of the conductor. - ANS-Skin effect
___________ is the a part of the transmitter that determines the working band of a RADAR
device. - ANS-Magnetron
____________ is/are the end result of wrong waveguide joining. - ANS-Standing waves
_____________ is the system of transmitting a modulated signal through a fiber optic cable
by varying the electricity of the mild beam. - ANS-Intensity modulation.
A ______ sign is usually transmitted thru a fiber optic cable through energizing and
de-energizing the light source. - ANS-PCM
A ________ is fashioned like a dish. - ANS-parabolic RADAR
A __________ uses refrigerant to remove liquid and oil. - ANS-kind one dehydrator
A -3DdB change____________________. - ANS-decreases the output by way of 50%
A +three dB change_____________. - ANS-will increase the output by using one hundred%
A radar mile measured in time is how lengthy? - ANS-12.36 microseconds.
A surface seek radar makes use of a frequency of ________. - ANS-20 GHz
A synchronizer plays the mission of __________. - ANS-Timing
A waveguide is defined as ________. - ANS-A gadget of material obstacles able to guiding
electromagnetic power.
A_________ can provide a effective condensed beam with a slender spectral variety, but is
highly-priced. - ANS-LASER
Active ECM is once in a while referred to as ___________. - ANS-jamming
Dielectric loss is ___________. - ANS-due to the capacitance fashioned among transmission
traces.
Fiber optics perform through the transmission of _________. - ANS-mild
__________ determines the colour of mild. - ANS-Wavelength
___________ is the effect of sign loss related to excessive frequency currents flowing close
to the outer surface of the conductor. - ANS-Skin effect
___________ is the a part of the transmitter that determines the working band of a RADAR
device. - ANS-Magnetron
____________ is/are the end result of wrong waveguide joining. - ANS-Standing waves
_____________ is the system of transmitting a modulated signal through a fiber optic cable
by varying the electricity of the mild beam. - ANS-Intensity modulation.
A ______ sign is usually transmitted thru a fiber optic cable through energizing and
de-energizing the light source. - ANS-PCM
A ________ is fashioned like a dish. - ANS-parabolic RADAR
A __________ uses refrigerant to remove liquid and oil. - ANS-kind one dehydrator
A -3DdB change____________________. - ANS-decreases the output by way of 50%
A +three dB change_____________. - ANS-will increase the output by using one hundred%
A radar mile measured in time is how lengthy? - ANS-12.36 microseconds.
A surface seek radar makes use of a frequency of ________. - ANS-20 GHz
A synchronizer plays the mission of __________. - ANS-Timing
A waveguide is defined as ________. - ANS-A gadget of material obstacles able to guiding
electromagnetic power.
A_________ can provide a effective condensed beam with a slender spectral variety, but is
highly-priced. - ANS-LASER
Active ECM is once in a while referred to as ___________. - ANS-jamming
Dielectric loss is ___________. - ANS-due to the capacitance fashioned among transmission
traces.
Fiber optics perform through the transmission of _________. - ANS-mild
