CORRECT ACTUAL QUESTIONS AND
CORRECTLY WELL DEFINED ANSWERS
LATEST ALREADY GRADED A+ 2025 –
2026/GEORGIA DRIVER’S LICENSE
Why are placards used? - ANSWERS-to warn others of hazardous materials
What is "sleep debt"? - ANSWERS-If you don't sleep enough, you "owe" more
sleep to yourself.
What are the danger signals of drowsy driving? - ANSWERS-your eyes close or
go out of focus by themselves, you have trouble keeping your head up, you
can't stop yawning, you have wondering disconnected thoughts, you don't
remember driving the last few miles
What four things related to cargo are drivers responsible for? - ANSWERS-1:
Inspecting your cargo.
2: Recognizing overloads & poorly balanced weight.
3: Knowing Cargo is properly secured & does not obscure your view ahead or
to the sides.
4: Knowing your cargo does not restrict your access to emergency equipment.
, How often must you stop while on the road to check your cargo? - ANSWERS-
Within the first 50 miles; after you have driven for 3 hours or 150 miles; after
every break you take during driving
How is Gross Combination Weight Rating different from Gross Combination
Weight? - ANSWERS-The GCWR is the maximum GCW specified by the
manufacturer for a specific combination of vehicles plus its load, whereas the
GCW is the total weight of a powered unit, plus trailer(s), plus the cargo.
Name two situations where legal maximum weights may not be safe. -
ANSWERS-During bad weather or in mountains
What can happen if you don't have enough weight on the front axle? -
ANSWERS-Under-loaded front axles can make the steering axle weight too
light to steer safely & can cause poor traction
Name some things you should check on the front of your vehicle during the
walk around inspection? - ANSWERS-Condition of front axle, Condition of
steering system, Condition of windshield, Lights and reflectors.
What should wheel bearing seals be checked for? - ANSWERS-leaks
How many red reflective triangles should you carry? - ANSWERS-three
How do you test hydraulic brakes for leaks? - ANSWERS-Pump the brake
pedal three times, then apply firm pressure to the pedal and hold for five
seconds. The pedal should not move.