NCCER IRON WORKER FINAL EXAM NEWEST 2025
ACTUAL EXAM WITH COMPLETE 80+ QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ | GUARANTEED PASS
The location of the anchor bolt in relation to other anchor bolts in the
same pattern should not deviate more than + or - - ✔✔✔ Correct Answer > 1/8
A welder opens the cylinder valve slightly and closes it immediately.
what process did he/she perform? - ✔✔✔ Correct Answer > cracking the cylinder
When can plumbing of structural members start? - ✔✔✔ Correct Answer > As
soon as the raising gang erects the first elevation of columns and beams
or a tier of columns and beams.
A device that prevents the reverse flow of gasses that would result in a
combustible mixture in the welding hose is a - ✔✔✔ Correct Answer > check valve
A condition in which the flame burns inside the tip, torch or hose is
known as a - ✔✔✔ Correct Answer > flashback
, When columns are erected ironworkers should only erect______. - ✔✔✔
Correct Answer > as many as can be tied together with beams that day.
The simplest plumbing tool, consisting of a line with a brass weight on it
is a______. - ✔✔✔ Correct Answer > plumb bob
The main difference between A325 and A490 bolts is______. - ✔✔✔ Correct
Answer > the amount of tensile strength they can withstand before failure.
The formula for calculating the length of the bolt needed is______. -
✔✔✔ Correct Answer > Length of bolt = thickness of metal(grip) + bolt diameter
+1/4" + thickness of washer(if used)
The most tension a bolt can take without failing is
called______strength. - ✔✔✔ Correct Answer > tensile
To minimize the number of times a connection must be pinned, and
ironworker should place the pin in the most difficult connection to be
held first. This is usually the hole______. - ✔✔✔ Correct Answer > with the least
amount of daylight showing through.
When using the turn-of-nut method to tension bolts, the amount of
turn beyond the snug position required varies from a______. - ✔✔✔ Correct
Answer > 1/3 turn to a 2/3 turn.
ACTUAL EXAM WITH COMPLETE 80+ QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ | GUARANTEED PASS
The location of the anchor bolt in relation to other anchor bolts in the
same pattern should not deviate more than + or - - ✔✔✔ Correct Answer > 1/8
A welder opens the cylinder valve slightly and closes it immediately.
what process did he/she perform? - ✔✔✔ Correct Answer > cracking the cylinder
When can plumbing of structural members start? - ✔✔✔ Correct Answer > As
soon as the raising gang erects the first elevation of columns and beams
or a tier of columns and beams.
A device that prevents the reverse flow of gasses that would result in a
combustible mixture in the welding hose is a - ✔✔✔ Correct Answer > check valve
A condition in which the flame burns inside the tip, torch or hose is
known as a - ✔✔✔ Correct Answer > flashback
, When columns are erected ironworkers should only erect______. - ✔✔✔
Correct Answer > as many as can be tied together with beams that day.
The simplest plumbing tool, consisting of a line with a brass weight on it
is a______. - ✔✔✔ Correct Answer > plumb bob
The main difference between A325 and A490 bolts is______. - ✔✔✔ Correct
Answer > the amount of tensile strength they can withstand before failure.
The formula for calculating the length of the bolt needed is______. -
✔✔✔ Correct Answer > Length of bolt = thickness of metal(grip) + bolt diameter
+1/4" + thickness of washer(if used)
The most tension a bolt can take without failing is
called______strength. - ✔✔✔ Correct Answer > tensile
To minimize the number of times a connection must be pinned, and
ironworker should place the pin in the most difficult connection to be
held first. This is usually the hole______. - ✔✔✔ Correct Answer > with the least
amount of daylight showing through.
When using the turn-of-nut method to tension bolts, the amount of
turn beyond the snug position required varies from a______. - ✔✔✔ Correct
Answer > 1/3 turn to a 2/3 turn.
