1 ll| llP l l a l l g
lle
METAL COILS ENDORSEMENT NYS EXAM|| ll ll ll ll
NEW YORK’S METAL COILS ENDORSEMENT
ll ll ll ll ll
EXAM ALL 80 QUESTIONS AND CORRECT
ll ll ll ll ll ll
ANSWERS|| LATEST AND VERIFIED UPDATE
ll ll ll ll ll
2024-2025 FULLY COVERED|| ASSURED PASS!!!
ll ll ll ll ll
What types of commercial vehicles are required to comply with the
ll ll ll ll ll ll ll ll ll ll
cargo securement regulations? - ANSWER: trucks, truck tractors, semi-
ll ll ll ll ll ll ll ll ll
trailers, full trailers and tractor-pole trailers with a gross vehicle weight
ll ll ll ll ll ll ll ll ll ll
rating of more than 10,000 lbs.
ll ll ll ll ll ll
What is the minimum amount of force that a cargo securement system
ll ll ll ll ll ll ll ll ll ll ll
should be expected to withstand when traveling on a curve, ramp or
ll ll ll ll ll ll ll ll ll ll ll ll
when changing lanes? - ANSWER: The minimum side-to-side or lateral
ll ll ll ll ll ll ll ll ll ll
force = 50% of the cargo weight when traveling on a curve or ramp,
ll ll ll ll ll ll ll ll ll ll ll ll ll ll
changing lanes or turning.
ll ll ll ll
If an aluminum coil weighs 12,000 lbs., the load securement must
ll ll ll ll ll ll ll ll ll ll
provide 6,000 lbs. of securement to prevent movement in the
ll ll ll ll ll ll ll ll ll ll
rearward direction. How is this performance criteria expressed in
ll ll ll ll ll ll ll ll ll
terms of gravity ("g")? - ANSWER: 0.5 g.
ll ll ll ll ll ll ll ll
What is the definition of Working Load Limit (WLL)? - ANSWER: The
ll ll ll ll ll ll ll ll ll ll ll
maximum load that may be applied to a component of a cargo
ll ll ll ll ll ll ll ll ll ll ll ll
securement system during normal service; it is usually assigned by the
ll ll ll ll ll ll ll ll ll ll ll
manufacturer of the component.
ll ll ll ll
As required by state and federal regulations, who is responsible for proper
ll ll ll ll ll ll ll ll ll ll ll
load securement? - ANSWER: The motor carrier and driver.
ll ll ll ll ll ll ll ll ll
,2 ll| llP l l a l l g
lle
A driver is required to check the cargo and its securing devices within how
ll ll ll ll ll ll ll ll ll ll ll ll ll
many miles after beginning a trip? - ANSWER: 50 Miles
ll ll ll ll ll ll ll ll ll ll
What is the maximum working load limit of a binder with a handle marked
ll ll ll ll ll ll ll ll ll ll ll ll ll
"3/8-G7, 7/16-G43"? - ANSWER: A. 3/8-G7 = 6,600 lbs.
ll ll ll ll ll ll ll ll ll
B. 7/16-G43 = 7,200 lbs.
ll ll ll ll
What is the working load limit of unmarked 2-inch synthetic webbing? -
ll ll ll ll ll ll ll ll ll ll ll
ANSWER: 2,000 lbs.
ll ll ll
If a metal coil is secured with 3/8-inch chains that do not display a
ll ll ll ll ll ll ll ll ll ll ll ll ll
grade rating, what is the default strength rating assigned to each chain? -
ll ll ll ll ll ll ll ll ll ll ll ll ll
ANSWER: 2,650 lbs.
ll ll ll
Transportation of one or more metal coils (individually or bundled ll ll ll ll ll ll ll ll ll
together) weighing 5,000 lbs. or more, must comply with which load
ll ll ll ll ll ll ll ll ll ll ll
securement requirement? - ANSWER: Metal coil specific securement
ll ll ll ll ll ll ll ll
rules apply.
ll ll
Endorsement "M". ll
How are tiedowns used to secure coils transported with eyes vertical on
ll ll ll ll ll ll ll ll ll ll ll
a flatbed vehicle, in a sided vehicle or intermodal container with
ll ll ll ll ll ll ll ll ll ll ll
anchor points? - ANSWER: If the coil is fastened to a pallet, the pallet
ll ll ll ll ll ll ll ll ll ll ll ll ll ll
must be strong enough so it cannot collapse under the forces described in
ll ll ll ll ll ll ll ll ll ll ll ll ll
the performance criteria (Section 1).
ll ll ll ll ll
Tiedowns must be arranged in the following manner to prevent coils from
ll ll ll ll ll ll ll ll ll ll ll
tipping in the forward, rearward, and side-to-side (lateral) directions;
ll ll ll ll ll ll ll ll ll
1. At least one indirect tiedown attached diagonally from the left side of the
ll ll ll ll ll ll ll ll ll ll ll ll
, 3 ll| llP l l a l l g
llvehicle, llacross llthe lleye llof llthe llcoil, llto llthe llright llside llof llthe llvehicle;
lle
lle
METAL COILS ENDORSEMENT NYS EXAM|| ll ll ll ll
NEW YORK’S METAL COILS ENDORSEMENT
ll ll ll ll ll
EXAM ALL 80 QUESTIONS AND CORRECT
ll ll ll ll ll ll
ANSWERS|| LATEST AND VERIFIED UPDATE
ll ll ll ll ll
2024-2025 FULLY COVERED|| ASSURED PASS!!!
ll ll ll ll ll
What types of commercial vehicles are required to comply with the
ll ll ll ll ll ll ll ll ll ll
cargo securement regulations? - ANSWER: trucks, truck tractors, semi-
ll ll ll ll ll ll ll ll ll
trailers, full trailers and tractor-pole trailers with a gross vehicle weight
ll ll ll ll ll ll ll ll ll ll
rating of more than 10,000 lbs.
ll ll ll ll ll ll
What is the minimum amount of force that a cargo securement system
ll ll ll ll ll ll ll ll ll ll ll
should be expected to withstand when traveling on a curve, ramp or
ll ll ll ll ll ll ll ll ll ll ll ll
when changing lanes? - ANSWER: The minimum side-to-side or lateral
ll ll ll ll ll ll ll ll ll ll
force = 50% of the cargo weight when traveling on a curve or ramp,
ll ll ll ll ll ll ll ll ll ll ll ll ll ll
changing lanes or turning.
ll ll ll ll
If an aluminum coil weighs 12,000 lbs., the load securement must
ll ll ll ll ll ll ll ll ll ll
provide 6,000 lbs. of securement to prevent movement in the
ll ll ll ll ll ll ll ll ll ll
rearward direction. How is this performance criteria expressed in
ll ll ll ll ll ll ll ll ll
terms of gravity ("g")? - ANSWER: 0.5 g.
ll ll ll ll ll ll ll ll
What is the definition of Working Load Limit (WLL)? - ANSWER: The
ll ll ll ll ll ll ll ll ll ll ll
maximum load that may be applied to a component of a cargo
ll ll ll ll ll ll ll ll ll ll ll ll
securement system during normal service; it is usually assigned by the
ll ll ll ll ll ll ll ll ll ll ll
manufacturer of the component.
ll ll ll ll
As required by state and federal regulations, who is responsible for proper
ll ll ll ll ll ll ll ll ll ll ll
load securement? - ANSWER: The motor carrier and driver.
ll ll ll ll ll ll ll ll ll
,2 ll| llP l l a l l g
lle
A driver is required to check the cargo and its securing devices within how
ll ll ll ll ll ll ll ll ll ll ll ll ll
many miles after beginning a trip? - ANSWER: 50 Miles
ll ll ll ll ll ll ll ll ll ll
What is the maximum working load limit of a binder with a handle marked
ll ll ll ll ll ll ll ll ll ll ll ll ll
"3/8-G7, 7/16-G43"? - ANSWER: A. 3/8-G7 = 6,600 lbs.
ll ll ll ll ll ll ll ll ll
B. 7/16-G43 = 7,200 lbs.
ll ll ll ll
What is the working load limit of unmarked 2-inch synthetic webbing? -
ll ll ll ll ll ll ll ll ll ll ll
ANSWER: 2,000 lbs.
ll ll ll
If a metal coil is secured with 3/8-inch chains that do not display a
ll ll ll ll ll ll ll ll ll ll ll ll ll
grade rating, what is the default strength rating assigned to each chain? -
ll ll ll ll ll ll ll ll ll ll ll ll ll
ANSWER: 2,650 lbs.
ll ll ll
Transportation of one or more metal coils (individually or bundled ll ll ll ll ll ll ll ll ll
together) weighing 5,000 lbs. or more, must comply with which load
ll ll ll ll ll ll ll ll ll ll ll
securement requirement? - ANSWER: Metal coil specific securement
ll ll ll ll ll ll ll ll
rules apply.
ll ll
Endorsement "M". ll
How are tiedowns used to secure coils transported with eyes vertical on
ll ll ll ll ll ll ll ll ll ll ll
a flatbed vehicle, in a sided vehicle or intermodal container with
ll ll ll ll ll ll ll ll ll ll ll
anchor points? - ANSWER: If the coil is fastened to a pallet, the pallet
ll ll ll ll ll ll ll ll ll ll ll ll ll ll
must be strong enough so it cannot collapse under the forces described in
ll ll ll ll ll ll ll ll ll ll ll ll ll
the performance criteria (Section 1).
ll ll ll ll ll
Tiedowns must be arranged in the following manner to prevent coils from
ll ll ll ll ll ll ll ll ll ll ll
tipping in the forward, rearward, and side-to-side (lateral) directions;
ll ll ll ll ll ll ll ll ll
1. At least one indirect tiedown attached diagonally from the left side of the
ll ll ll ll ll ll ll ll ll ll ll ll
, 3 ll| llP l l a l l g
llvehicle, llacross llthe lleye llof llthe llcoil, llto llthe llright llside llof llthe llvehicle;
lle
