OSHA 30 Construction Module 14: Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades Questions and Answers Already Passed | Graded A+

OSHA 30 Construction Module 14: Motor Vehicles, Mechanized Equipment and Marine Operation s; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades Questions and Answers Already Passed | Graded A+ Must be provided and used when inflating, mounting, or dismounting tires installed on split rims, or rims equipped with loc king rings or similar devices. True Bulldozer and scraper blades, end -loader buckets, dump bodies, and similar equipment, must be fully lowered and never blocked when being repaired or when not in use. False Must be provided on spur railroad tracks where a rolling car could contact other cars being worked, enter a building, work or traffic area. Derail and/or bumper blocks OSHA specifies that for overhead power -lines rated 50 kV. or below, minimum clearance between the lines and any part of the crane or loa d must be: 10 feet Any overhead wire must be considered to be an energized line UNLESS and UNTIL person owning line or electrical utility indicate that it is not an energized line and it has been visibly grounded. True Flammable liquids have “flash points” below 100 degrees Fahrenheit