Complete Real Exam Questions And Correct Answers (Verified
Answers) Already Graded A+ | Guaranteed Success!! | Newest
Exam | Just Released!!
How would you program a CO3 if mounted on a hallway wall -
ANSWER-Loop
1, zone type
14
When installing a translator you must program all the existing
sensors as new
equipment on the panel -
ANSWER-False
When in programming a DW 11 that has been installed on a
window which
zone/sensor type should be used -
ANSWER-03
True or false the DW 21 sensor should always be installed in
the door frame -
ANSWER-
True
, When installing a DW 21 into a metal door frame with a wooden
door which should you be sure to use? - ANSWER-A DW 11
should be used on all metal door frames
Which of the following zone/sensor types are correct when
programming a SMKT3 - ANSWER-Type 09 For smoke
detection, type 09 for heat detection, type 08 for freeze
detection
What is the correct height at which to install the PIR2 -
ANSWER-At 7.5 feet,
2.1
m
When programming a DW 21, which loop number is used -
ANSWER-1
True or false win programming a sensor into the panel you can
type in the serial
number or learn it in by triggering the device -
ANSWER-True
How would you program a GB to when it is mounted on a
master bedroom
ceiling - ANSWER-Loop 1 zone
type 3
True or false panic pendants are programmed as an audible
alarm type 07 -