2026 | Complete Study Guide for Water Extraction, Moisture
Mapping, Structural Drying, Mold Prevention, Safety Protocols,
Equipment Operation, and Practice Questions to Pass the IICRC
WRT Certification on the First Attempt
Question 1:
What is the primary purpose of water extraction in the water damage restoration
process?
• A) To minimize structural damage
• B) To prevent mold growth
• C) To remove contaminants
• D) To dry the affected area
Correct Option: B) To prevent mold growth
Rationale: Water extraction is crucial to minimize the duration of water exposure, which
helps prevent mold growth and structural damage.
Question 2:
When assessing a water-damaged site, which category of water refers to water that
is clean and safe to use?
• A) Category 1
• B) Category 2
• C) Category 3
• D) Black water
Correct Option: A) Category 1
Rationale: Category 1 water is classified as clean water, typically from a broken supply
line or a faucet, and is safe for consumption.
Question 3:
Which type of equipment is primarily used for drying out structures after water
damage?
• A) Dehumidifiers
• B) Air movers
• C) Heat guns
, • D) Commercial vacuums
Correct Option: B) Air movers
Rationale: Air movers are essential for increasing air circulation, which accelerates the
drying process in water-damaged areas.
Question 4:
What is the recommended relative humidity level for effective drying in water
damage restoration?
• A) 60% or higher
• B) 30% - 50%
• C) 10% - 20%
• D) 70% or higher
Correct Option: B) 30% - 50%
Rationale: Maintaining a relative humidity level between 30% and 50% is crucial for
effective drying and to prevent mold growth.
Question 5:
What is the first step in the water damage restoration process?
• A) Emergency contact and assessment
• B) Start drying procedures
• C) Begin cleanup
• D) Repair structural damage
Correct Option: A) Emergency contact and assessment
Rationale: The first step involves contacting emergency services and assessing the
damage to devise an effective restoration plan.
Question 6:
Which material is commonly used for water damage restoration due to its
absorbent properties?
• A) Plastic sheets
• B) Fiberglass insulation
• C) Absorbent pads
, • D) Concrete
Correct Option: C) Absorbent pads
Rationale: Absorbent pads are designed to soak up moisture quickly and are commonly
used in water damage restoration.
Question 7:
What type of water is considered "gray water"?
• A) Water from a toilet
• B) Water from sinks and dishwashers
• C) Water from a flood
• D) Rainwater
Correct Option: B) Water from sinks and dishwashers
Rationale: Gray water is mildly contaminated and comes from sources like sinks,
dishwashers, and laundry.
Question 8:
What should be done immediately after a flooding event?
• A) Start moving the furniture
• B) Begin drying the carpets
• C) Ensure power is turned off to the affected area
• D) Leave the area unattended
Correct Option: C) Ensure power is turned off to the affected area
Rationale: Safety is the first priority; power should be turned off to prevent
electrocution during water extraction.
Question 9:
Which of the following is a common sign of mold growth?
• A) Musty odor
• B) Bright colors
• C) Dry textures
, • D) Normal humidity
Correct Option: A) Musty odor
Rationale: A musty odor is often one of the first signs of mold growth in water-damaged
areas.
Question 10:
What is the preferred method for cleaning non-porous surfaces in a water-damaged
area?
• A) Dry cleaning
• B) Disinfecting solution
• C) Vacuuming only
• D) Steam cleaning
Correct Option: B) Disinfecting solution
Rationale: Disinfecting solutions are critical for ensuring that non-porous surfaces are
properly sanitized after water damage.
Question 11:
What does the IICRC stand for?
• A) International Institute for Carpet Restoration
• B) Institute of Interior Cleaning and Restoration
• C) International Institute of Cleaning and Restoration Certification
• D) Institute of Inspection, Cleaning and Restoration Certification
Correct Option: D) Institute of Inspection, Cleaning and Restoration Certification
Rationale: IICRC refers to an industry-standard organization that sets the certification
for restoration professionals.
Question 12:
Which of the following describes ‘Category 3’ water?
• A) Clean water
• B) Contaminated water from sewage
• C) Water from a broken faucet