COMPREHENSIVE FIREFIGHTER II CERTIFICATION
PREPARATION WITH UPDATED TRAINING STANDARDS AND
STRUCTURED REVIEW SUPPORT || REAL TCFP EXAM-
STYLE QUESTIONS WITH VERIFIED DETAILED ACCURATE
ANSWERS LATEST EDITION || ELITE A+ PREMIUM QUALITY
GUARANTEED
Under the Incident Command System, the __________ is responsible for
determining the strategic goals for control of an incident.
Question 1 options:
1) Incident Commander
2) Operations Officer
3) Planning Officer
4) Administration Officer - THE CORRECT ANSWER - 1) Incident
Commander
In the Incident Management System, who is the one person ultimately
responsible for managing an incident?
Question 2 options:
1) A Chief Officer
2) The Planning Chief
3) The Incident Commander
4) The Operations Chief - THE CORRECT ANSWER - 3) The Incident
Commander
6.2.1 REPORTS 6
National Fire Incident Reporting System information is transmitted to the:
Question 3 options:
1) U. S. Fire Administration.
2) Emergency Management.
,3) Department of Homeland Security.
4) National Fire Protection Association. - THE CORRECT ANSWER - 1)
U. S. Fire Administration.
6.2.2 COMMUNICATIONS 28
The tracking of personnel working at an incident requires a system that is
standardized
for every incident to establish:
Question 4 options:
1) accountability.
2) chain of command.
3) unity of command.
4) span of control. - THE CORRECT ANSWER - 1) accountability.
6.2.2 COMMUNICATIONS 21
An employee becomes frustrated because they cannot comply with conflicting
orders
from different bosses. This situation was most likely caused by a violation of:
Question 5 options:
1) chain of command.
2) division of labor.
3) span of control.
4) unity of command. - THE CORRECT ANSWER - 4) unity of command.
6.3.1 LIQUID FIRE 49
One method to extinguish fires in stacked materials is to:
Question 6 options:
1) use Class A foam.
2) use an aqueous film forming foam penetrating nozzle.
, 3) apply sand to cover the fire.
4) ignite backfire torch. - THE CORRECT ANSWER - 1) use Class A foam.
6.3.1 LIQUID FIRE 40
Which is a hydrocarbon?
Question 7 options:
1) Ketone
2) Kerosene
3) Alcohol
4) Acetone - THE CORRECT ANSWER - 2) Kerosene
6.3.1 LIQUID FIRE 3
A __________ nozzle is used with a foam solution to produce a low-expansion,
short-lasting foam.
Question 8 options:
1) fog
2) mechanical blower
3) solid-bore
4) water-aspirating foam - THE CORRECT ANSWER - 1) fog
6.3.1 LIQUID FIRE 28
Friction loss is:
Question 9 options:
1) the amount or volume of water that a nozzle will provide.
2) the force of nature that makes the nozzle move in the opposite direction of the
water flow.
3) the forward pressure of water as it leaves an opening.