BICSI Connect RCDD V01 REAL EXAM
ALREADY RATED Questions and Answers
(100% Correct Answers) Already Graded A+
What type of fluctuation is caused by a decrease in the
nominal voltage or current for more than 3600 cycles (one
minute)? [ Ans: ] Undervoltage
What is the maximum recommended length for a
telecommunications bonding conductor (TBC)? [ Ans: ] 9
m (30ft)
You have been hired as a consultant for a property
management firm that would like to implement a
telecommunications administration system in one of its
properties. The property in question is a twelve-story
office building with multiple tenants. Which class of
administration is best suited for this type of
infrastructure? [ Ans: ] Class 2
Which device is used to manage resources that are shared
by users and administrators on a network? [ Ans: ] Server
How much space must be allocated for an equipment
room in a building that has 9300 m2 (100,000 ft2) of
usable floor space and a total floor area of 13,935 m2
(150,000 ft2)? [ Ans: ] 83.8 m2 (900 ft2)
You do not have much space. As a result, which type of
fiber termination connectors should you use to design a
horizontal crossconnect/floor distributor (HC/FD) where
,you will be terminating OM4 optical fiber cable? [ Ans: ]
LC
Which of the following telecommunications infrastructure
elements requires an identifier in a Class 1 system? [ Ans:
] Horizontal link
What is the minimum separation distance that must be
maintained between transformers and a 5 kVA
transformer? [ Ans: ] 1220 mm (48 in)
Which of the following gigabit passive optical networks
(GPONs) has a maximum supported distance of 60 km (37
mi)? [ Ans: ] ITU G.984 GPON (C+ Optics)
A customer has a backbone application for balanced
twisted-pair cable that will require data to be transmitted
at 300 MHz. Which category/class of cable would meet
these requirements? [ Ans: ] Category 6A/class EA
You are a designer at a telephone company. A new
business in town wants to add a 6 Mb/s channel. They are
11,729 feet from the central office. Which of the following
is the best installation option for these requirements? [
Ans: ] Asymmetric digital subscriber line (ADSL)
What type of disturbance is created when inductive and
capacitive circuits are switched on and off over an
operation cycle? [ Ans: ] Electrical fast transient
What type of energy has a frequency higher than the
visible light? [ Ans: ] Ultraviolet
, An installation team is running a 600-pair category 3 cable
from the first floor to the top floor of a twenty-story
building. The cable will be attached to a supporting strand
that has been anchored in a vertical shaft that runs the
entire pathway. What is the minimum number of steel
cable ties that should be used to attach the category 3
cable to the support strand? [ Ans: ] 60
A customer has 72 workstations that will be connected by
multiuser telecommunications outlet assemblies
(MUTOAs). What is the minimum number of MUTOAs that
will be needed to serve these work areas? [ Ans: ] 6
Which telecommunications administration class addresses
the needs of a campus, including its buildings and OSP
elements? [ Ans: ] Class 3
A trading floor has a HC (FD) 80 meters (262 ft) away from
a MUTOA. What is the maximum length of the work area
cord? The work area cords are 24 AWG [0.51 mm (0.020
in)]. [ Ans: ] 13 m (43 ft)
What is the center wavelength of a vertical cavity surface
emitting laser (VCSEL)? [ Ans: ] 850 nm and 1300 nm
Which of the following is an optional record for a Class 3
telecommunications system per the ANSI/TIA-606-C
standard? [ Ans: ] Campus or site
You have been asked to review specifications for the
conductors and protection devices for a project. Upon
calculating the information you notice that the feeder and
ALREADY RATED Questions and Answers
(100% Correct Answers) Already Graded A+
What type of fluctuation is caused by a decrease in the
nominal voltage or current for more than 3600 cycles (one
minute)? [ Ans: ] Undervoltage
What is the maximum recommended length for a
telecommunications bonding conductor (TBC)? [ Ans: ] 9
m (30ft)
You have been hired as a consultant for a property
management firm that would like to implement a
telecommunications administration system in one of its
properties. The property in question is a twelve-story
office building with multiple tenants. Which class of
administration is best suited for this type of
infrastructure? [ Ans: ] Class 2
Which device is used to manage resources that are shared
by users and administrators on a network? [ Ans: ] Server
How much space must be allocated for an equipment
room in a building that has 9300 m2 (100,000 ft2) of
usable floor space and a total floor area of 13,935 m2
(150,000 ft2)? [ Ans: ] 83.8 m2 (900 ft2)
You do not have much space. As a result, which type of
fiber termination connectors should you use to design a
horizontal crossconnect/floor distributor (HC/FD) where
,you will be terminating OM4 optical fiber cable? [ Ans: ]
LC
Which of the following telecommunications infrastructure
elements requires an identifier in a Class 1 system? [ Ans:
] Horizontal link
What is the minimum separation distance that must be
maintained between transformers and a 5 kVA
transformer? [ Ans: ] 1220 mm (48 in)
Which of the following gigabit passive optical networks
(GPONs) has a maximum supported distance of 60 km (37
mi)? [ Ans: ] ITU G.984 GPON (C+ Optics)
A customer has a backbone application for balanced
twisted-pair cable that will require data to be transmitted
at 300 MHz. Which category/class of cable would meet
these requirements? [ Ans: ] Category 6A/class EA
You are a designer at a telephone company. A new
business in town wants to add a 6 Mb/s channel. They are
11,729 feet from the central office. Which of the following
is the best installation option for these requirements? [
Ans: ] Asymmetric digital subscriber line (ADSL)
What type of disturbance is created when inductive and
capacitive circuits are switched on and off over an
operation cycle? [ Ans: ] Electrical fast transient
What type of energy has a frequency higher than the
visible light? [ Ans: ] Ultraviolet
, An installation team is running a 600-pair category 3 cable
from the first floor to the top floor of a twenty-story
building. The cable will be attached to a supporting strand
that has been anchored in a vertical shaft that runs the
entire pathway. What is the minimum number of steel
cable ties that should be used to attach the category 3
cable to the support strand? [ Ans: ] 60
A customer has 72 workstations that will be connected by
multiuser telecommunications outlet assemblies
(MUTOAs). What is the minimum number of MUTOAs that
will be needed to serve these work areas? [ Ans: ] 6
Which telecommunications administration class addresses
the needs of a campus, including its buildings and OSP
elements? [ Ans: ] Class 3
A trading floor has a HC (FD) 80 meters (262 ft) away from
a MUTOA. What is the maximum length of the work area
cord? The work area cords are 24 AWG [0.51 mm (0.020
in)]. [ Ans: ] 13 m (43 ft)
What is the center wavelength of a vertical cavity surface
emitting laser (VCSEL)? [ Ans: ] 850 nm and 1300 nm
Which of the following is an optional record for a Class 3
telecommunications system per the ANSI/TIA-606-C
standard? [ Ans: ] Campus or site
You have been asked to review specifications for the
conductors and protection devices for a project. Upon
calculating the information you notice that the feeder and
