NEIEP 300 FINAL NEWEST EXAM
2026/2027 WITH MULTIPLE
CHOICE QUESTIONS AND
DETAILED SOLVED SOLUTIONDS
ALREADY GRADED A+ AND 100%
GUARANTEE PASS (JUST
RELEASED!!!!!)
What is the unit to measure opposite to current flow - THE
CORRECT ANSWER-Ohms
What happens to resistance in a wire, if its width is increased
four times - THE CORRECT ANSWER-Resistance is 1/4
What does the designation DPDTNO switch represent - THE
CORRECT ANSWER-Double-pole, Double-Throw, Normally Open
switch
_____ refer to the moveable contacts on a switch - THE CORRECT
ANSWER-Poles
Contact wear is always _______ on DC switches than AC
switches - THE CORRECT ANSWER-greater
, Describe maintained contact switch action - THE CORRECT ANSWER-
When the switch is actuated once, contacts close an remain
close
What type of switch would be found at a terminal landing - THE
CORRECT ANSWER-Unidirectional limit switch
What are the resistance band colors - THE CORRECT ANSWER-Black,
Brown, Red, Orange, Yellow ,Green, Blue, Violet, Grey, White
What is the tolerance on a gold band resistance - THE CORRECT
ANSWER-5%
What is the tolerance on a silver band resistance - THE CORRECT
ANSWER-10%
What is the tolerance when there is no band color - THE CORRECT
ANSWER-20%
Which resistor has a single fixed terminal and shaft driven,
moveable contact - THE CORRECT ANSWER-Rheostat
Carbon film resistors have which characteristic - THE CORRECT
ANSWER-Maintain close tolerances in response to temperature
changes
_____ have a negative temperature coefficient - THE CORRECT
ANSWER-Thermistor
2026/2027 WITH MULTIPLE
CHOICE QUESTIONS AND
DETAILED SOLVED SOLUTIONDS
ALREADY GRADED A+ AND 100%
GUARANTEE PASS (JUST
RELEASED!!!!!)
What is the unit to measure opposite to current flow - THE
CORRECT ANSWER-Ohms
What happens to resistance in a wire, if its width is increased
four times - THE CORRECT ANSWER-Resistance is 1/4
What does the designation DPDTNO switch represent - THE
CORRECT ANSWER-Double-pole, Double-Throw, Normally Open
switch
_____ refer to the moveable contacts on a switch - THE CORRECT
ANSWER-Poles
Contact wear is always _______ on DC switches than AC
switches - THE CORRECT ANSWER-greater
, Describe maintained contact switch action - THE CORRECT ANSWER-
When the switch is actuated once, contacts close an remain
close
What type of switch would be found at a terminal landing - THE
CORRECT ANSWER-Unidirectional limit switch
What are the resistance band colors - THE CORRECT ANSWER-Black,
Brown, Red, Orange, Yellow ,Green, Blue, Violet, Grey, White
What is the tolerance on a gold band resistance - THE CORRECT
ANSWER-5%
What is the tolerance on a silver band resistance - THE CORRECT
ANSWER-10%
What is the tolerance when there is no band color - THE CORRECT
ANSWER-20%
Which resistor has a single fixed terminal and shaft driven,
moveable contact - THE CORRECT ANSWER-Rheostat
Carbon film resistors have which characteristic - THE CORRECT
ANSWER-Maintain close tolerances in response to temperature
changes
_____ have a negative temperature coefficient - THE CORRECT
ANSWER-Thermistor
