Smog Check Inspector Level 1 Exam
(Latest Update ) | Test
Practice Questions with Answers |
100 % Correct | Grade A
Question:
The Electronic Transmission (ET) network allows for emissions inspection
systems to connect to which of the following?
Answer:
VID
Question:
A technician is going to conduct the visual inspection portion of the smog
check inspection. Upon opening the hood he/she notices the vehicle has no
underhood label present. What action should the technician take as a result
of this finding?
Answer:
Use the ECS manual or BAR approved referee material to determine the
emissions components for this vehicle
,Question:
The underhood emissions label states that the ignition timing is "non-
adjustable." The label also reads that the timing specification is 12 degrees
BTDC. What is the correct procedure to follow?
Answer:
enter the timing as "not applicable"
Question:
When should the tailpipe smoke test be performed on a gasoline vehicle?
Answer:
after the tailpipe emissions test
Question:
The vehicle arrives for a smog check inspection. While running the tailpipe
emissions portion of the inspection, the MIL light comes on. Which of the
following is the correct procedure?
Answer:
enter "pass" during the MIL functional test, if the MIL operates correctly
when prompted by the BAR 97 EIS
, Question:
During the visual inspection, the technician notices that the vehicle has a
non-oem aftermarket carburetor installed. What is the correct procedure to
inspect this vehicle?
Answer:
check to see if the carburetor is approved as a street-legal replacement part
Question:
Which area in California does not perform ASM loaded-mode inspections?
Answer:
basic and change of ownership areas
Question:
The underhood emissions label reads that the ignition timing is 8 degrees
BTDC, and the ignition timing is adjustable. Under which of the following
conditions will this vehicle fail the functional inspection?
Answer:
when the ignition timing is not +/- 3 degrees BTDC
(Latest Update ) | Test
Practice Questions with Answers |
100 % Correct | Grade A
Question:
The Electronic Transmission (ET) network allows for emissions inspection
systems to connect to which of the following?
Answer:
VID
Question:
A technician is going to conduct the visual inspection portion of the smog
check inspection. Upon opening the hood he/she notices the vehicle has no
underhood label present. What action should the technician take as a result
of this finding?
Answer:
Use the ECS manual or BAR approved referee material to determine the
emissions components for this vehicle
,Question:
The underhood emissions label states that the ignition timing is "non-
adjustable." The label also reads that the timing specification is 12 degrees
BTDC. What is the correct procedure to follow?
Answer:
enter the timing as "not applicable"
Question:
When should the tailpipe smoke test be performed on a gasoline vehicle?
Answer:
after the tailpipe emissions test
Question:
The vehicle arrives for a smog check inspection. While running the tailpipe
emissions portion of the inspection, the MIL light comes on. Which of the
following is the correct procedure?
Answer:
enter "pass" during the MIL functional test, if the MIL operates correctly
when prompted by the BAR 97 EIS
, Question:
During the visual inspection, the technician notices that the vehicle has a
non-oem aftermarket carburetor installed. What is the correct procedure to
inspect this vehicle?
Answer:
check to see if the carburetor is approved as a street-legal replacement part
Question:
Which area in California does not perform ASM loaded-mode inspections?
Answer:
basic and change of ownership areas
Question:
The underhood emissions label reads that the ignition timing is 8 degrees
BTDC, and the ignition timing is adjustable. Under which of the following
conditions will this vehicle fail the functional inspection?
Answer:
when the ignition timing is not +/- 3 degrees BTDC
