USPA SKYDIVING A LATEST
LICENSE EXAM
According to the Basic Safety Requirements, the maximum ground wind
speed for an A licensed skydiver is? - ANSWERS-Unlimited
According to the Basic Safety Requirements, any person performing a
wing suit jump must... - ANSWERS-have at least 200 skydives and hold
a current USPA license
For freeflying, the first position that a skydivers should become
proficient with is - ANSWERS-The Back Fly
When freeflying, a jumper should - ANSWERS-1) Use proper
equipment that provides adequate pin and bridle protection, regardless of
orientation to the ground
2) Have a rig equipped with an automatic activation device (AAD)
3) Wear at least one audible and one visual altimeter
Below 10,000 feet, a jumper must maintain how much horizontal
separation from the clouds? - ANSWERS-2,000 feet
END OF
PAGE 1
, USPA SKYDIVING A LATEST
LICENSE EXAM
Right after deployment, you see another skydivers very close and flying
directly at you. The correct response would be - ANSWERS-Both
jumpers should steer to the right
Who is responsible for a jumper observing cloud clearance
requirements? - ANSWERS-1) The Jumper
2) The pilot
What are the minimum visibility requirements below 10,000 feet? -
ANSWERS-3 Miles
What is the quickest and safest way to change heading immediately after
opening the parachute? - ANSWERS-Pull down on one rear riser with
the brakes still stowed
What is the recommended minimum breakoff altitude for free fall
groups of five or fewer? - ANSWERS-1,500 feet above the highest
planned deployment altitude
What is the danger of entering a toggle turn too quickly? - ANSWERS-
line twist
END OF
PAGE 2
LICENSE EXAM
According to the Basic Safety Requirements, the maximum ground wind
speed for an A licensed skydiver is? - ANSWERS-Unlimited
According to the Basic Safety Requirements, any person performing a
wing suit jump must... - ANSWERS-have at least 200 skydives and hold
a current USPA license
For freeflying, the first position that a skydivers should become
proficient with is - ANSWERS-The Back Fly
When freeflying, a jumper should - ANSWERS-1) Use proper
equipment that provides adequate pin and bridle protection, regardless of
orientation to the ground
2) Have a rig equipped with an automatic activation device (AAD)
3) Wear at least one audible and one visual altimeter
Below 10,000 feet, a jumper must maintain how much horizontal
separation from the clouds? - ANSWERS-2,000 feet
END OF
PAGE 1
, USPA SKYDIVING A LATEST
LICENSE EXAM
Right after deployment, you see another skydivers very close and flying
directly at you. The correct response would be - ANSWERS-Both
jumpers should steer to the right
Who is responsible for a jumper observing cloud clearance
requirements? - ANSWERS-1) The Jumper
2) The pilot
What are the minimum visibility requirements below 10,000 feet? -
ANSWERS-3 Miles
What is the quickest and safest way to change heading immediately after
opening the parachute? - ANSWERS-Pull down on one rear riser with
the brakes still stowed
What is the recommended minimum breakoff altitude for free fall
groups of five or fewer? - ANSWERS-1,500 feet above the highest
planned deployment altitude
What is the danger of entering a toggle turn too quickly? - ANSWERS-
line twist
END OF
PAGE 2
