Click here for more: Scholars nexus
ASNT Level III Study Guide Basic Questions with Detailed
Verified Answers
Which of the following statements is true concerning the usage of SNT-TC-1A? Ans: ✓ ✓ ✓ SNT-TC-
1A is not intended to be used as a strict specification.
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must be:
Ans: ✓ ✓ ✓ Written and stated in general terms
With regard to the training of NDT personnel, the employer: Ans: ✓ ✓ ✓ May engage an outside
service but is, nevertheless, responsible for the certification of the company's NDT personnel
SNT-TC-1A is intended as a guideline for employers: Ans: ✓ ✓ ✓ To establish their own written
practice that must be used as a strict specification.
The following is a statement in SNT-TC-1A "It is recognized that these guidelines may not be
appropriate for certain employers; circumstances and / or applications." What should be done if the
guidelines are not appropriate? Ans: ✓ ✓ ✓ The employer should review the detailed
recommendations and modify them as necessary to meet its particular needs.
Who should be responsible to assess whether or not an individual should be qualified and certified
who does not perform NDT, but monitors and evaluates NDT? Ans: ✓ ✓ ✓ The individual's
employer.
© Get it right 2025 Getaway - Stuvia US All rights reserved
, Click here for more: Scholars nexus
To which of the following NDT methods is SNT-TC-1A currently not applicable Ans: ✓ ✓ ✓
Holographic testing
ASNT intended that the recommendations of SNT-TC-1A be applied Ans: ✓ ✓ ✓ With flexibility and
reason
Of the following, which is most appropriate to determine the needs to qualify and certify personnel
whose only NDT function is to operate digital thickness equipment. Ans: ✓ ✓ ✓ The employer.
Certification is Ans: ✓ ✓ ✓ Written testimony of qualification.
Use of SNT-TC-1A is mandatory when: Ans: ✓ ✓ ✓ It has been specified by the customer.
The basic levels of qualification recommended by SNT-TC-1A are: Ans: ✓ ✓ ✓ Level I, II, III.
Should personnel that operate ultrasonic digital thickness measurement equipment to qualified and
certified Ans: ✓ ✓ ✓ Weather any NDT personnel should be qualified and certified depends solely
upon the needs of the employer and the requirements of the employer's customers or clientele.
According to the recommendations of SNT-TC-1A which of the following is true concerning a
Trainee's activities? Ans: ✓ ✓ ✓ The Trainee may not conduct nondestructive test independently
and may not report test results
According to SNT-TC-1A, which of the following is not true for a Level III? Ans: ✓ ✓ ✓ Must train
and examine the Level I and II personnel in his or her organization.
According to written instructions, an NDT Level I may be qualified to perform: Ans: ✓ ✓ ✓ Specific
calibrations, Specific nondestructive test, specific evaluations, and write reports of test results.
© Get it right 2025 Getaway - Stuvia US All rights reserved
ASNT Level III Study Guide Basic Questions with Detailed
Verified Answers
Which of the following statements is true concerning the usage of SNT-TC-1A? Ans: ✓ ✓ ✓ SNT-TC-
1A is not intended to be used as a strict specification.
The SNT-TC-1A Interpretation Panel will respond to inquiries about SNT-TC-1A. The inquiry must be:
Ans: ✓ ✓ ✓ Written and stated in general terms
With regard to the training of NDT personnel, the employer: Ans: ✓ ✓ ✓ May engage an outside
service but is, nevertheless, responsible for the certification of the company's NDT personnel
SNT-TC-1A is intended as a guideline for employers: Ans: ✓ ✓ ✓ To establish their own written
practice that must be used as a strict specification.
The following is a statement in SNT-TC-1A "It is recognized that these guidelines may not be
appropriate for certain employers; circumstances and / or applications." What should be done if the
guidelines are not appropriate? Ans: ✓ ✓ ✓ The employer should review the detailed
recommendations and modify them as necessary to meet its particular needs.
Who should be responsible to assess whether or not an individual should be qualified and certified
who does not perform NDT, but monitors and evaluates NDT? Ans: ✓ ✓ ✓ The individual's
employer.
© Get it right 2025 Getaway - Stuvia US All rights reserved
, Click here for more: Scholars nexus
To which of the following NDT methods is SNT-TC-1A currently not applicable Ans: ✓ ✓ ✓
Holographic testing
ASNT intended that the recommendations of SNT-TC-1A be applied Ans: ✓ ✓ ✓ With flexibility and
reason
Of the following, which is most appropriate to determine the needs to qualify and certify personnel
whose only NDT function is to operate digital thickness equipment. Ans: ✓ ✓ ✓ The employer.
Certification is Ans: ✓ ✓ ✓ Written testimony of qualification.
Use of SNT-TC-1A is mandatory when: Ans: ✓ ✓ ✓ It has been specified by the customer.
The basic levels of qualification recommended by SNT-TC-1A are: Ans: ✓ ✓ ✓ Level I, II, III.
Should personnel that operate ultrasonic digital thickness measurement equipment to qualified and
certified Ans: ✓ ✓ ✓ Weather any NDT personnel should be qualified and certified depends solely
upon the needs of the employer and the requirements of the employer's customers or clientele.
According to the recommendations of SNT-TC-1A which of the following is true concerning a
Trainee's activities? Ans: ✓ ✓ ✓ The Trainee may not conduct nondestructive test independently
and may not report test results
According to SNT-TC-1A, which of the following is not true for a Level III? Ans: ✓ ✓ ✓ Must train
and examine the Level I and II personnel in his or her organization.
According to written instructions, an NDT Level I may be qualified to perform: Ans: ✓ ✓ ✓ Specific
calibrations, Specific nondestructive test, specific evaluations, and write reports of test results.
© Get it right 2025 Getaway - Stuvia US All rights reserved
