EPIC AMB400 – Full Course Bundle: Tests, Procedures,
Immunizations & Referrals (2025/2026 Edition)
Your providers would like the question "Is the patient pregnant?" to appear when
ordering an X-ray for female patients aged 12 or older. After the order-specific question
has been created, how will you accomplish this request? (Choose only one answer.)
A. Link the question to the X-Ray Default Settings screen of System Definitions.
B. Link the question to the "X-ray orderables" procedure category.
C. Link the question to the OCC at the procedure category level.
D. Link the question to the imaging procedure record. - correct answerLink the question
to the "X-ray orderables" procedure category.
Which of the following can be specified in System Definitions or in an OCC linked to
System Definitions? (Choose all that apply.)
A. Display Items
B. Default Order Class
C. Default Priority
D. Default Status
E. Item buttons for Class
F. Order-specific question for pediatric patients - correct answerDisplay Items, Default
Priority, and Item buttons for Class
An ankle x-ray procedure is linked to the procedure category "X-ray orderables." All
other procedures linked to this category have three class buttons, while this procedure
has four. All orders within the category have the same allowed classes, so what is
causing this difference? (Choose all that apply.)
A. There are three class buttons defined in the procedure category.
B. This procedure has one defined class button.
C. There are three available classes set up in the procedure category.
D. There are four class buttons defined in the procedure record. - correct answerThere
are three class buttons defined in the procedure category and There are four class
buttons defined in the procedure record.
Referrals at your organization have appropriate display items appear within the order
composer based off of the value selected for Class (either "Internal Referral" or
"Outgoing Referral"). To achieve this, a minimum of three OCC records must be created
and linked to the procedure category. What are the contexts of the OCC records?
(Choose only one answer.)
A. Referral-Ambulatory, Ambulatory, External Referral-Ambulatory
B. Referral-Ambulatory, Incoming Referral-Ambulatory, External-Referral-Ambulatory
C. Ambulatory, Ambulatory-Referral, External Referral-Ambulatory
,D. Ambulatory, Internal Referral-Ambulatory, External Referral-Ambulatory - correct
answerAmbulatory, Internal Referral-Ambulatory, External Referral-Ambulatory
After ordering a varicella vaccination procedure, a clinician will open the Immunizations
activity to administer the immunization and a default dose of 0.5 mL appears. When a
clinician is documenting a patient-reported varicella vaccination using the same varicella
immunization record, what will appear for the dose? (Choose only one answer.)
A. Blank fields
B. 0.5 mL
C. The "mL" unit, but a missing numeric value
D. A stop sign, indicating the fields are required - correct answerBlank fields
Resources
Part I: When selecting the eye culture lab test from within the Conjunctivitis SmartSet,
its Status is Future. But, when clinicians in the ophthalmology department order the
same test from their department preference list, the Status is Normal. Why? (Choose
only one answer.)
A. Within the Labs SmartGroup, the eye culture item is listing default values from a
system preference list.
B. SmartSets will display default values from a preference list of the user who has
selected the order.
C. Within the Labs SmartGroup, the eye culture item has an override value for status.
D. The Conjunctivitis SmartSet has overridden the default status for all labs it - correct
answerWithin the Labs SmartGroup, the eye culture item has an override value for
status.
What BPA type would be needed to suggest an allergic rhinitis SmartSet for any office
visit scheduled in an allergy department? (Choose only one answer.)
A. Criteria
B. SmartSet Suggestion
C. SmartSet Base
D. This is not possible - correct answerSmartSet Suggestion
Clinicians have requested that the Pap smear SmartGroup only be available for female
patients age 21 or older when the Adult Preventative Interventions SmartSet is opened.
How could you satisfy this request? (Choose only one answer.)
A. Create a BPA SmartSet Base record to restrict Labs section for female patients and
suggest it for male patients. Create a BPA Criteria record to suggest the SmartSet for
patients age 21 or older.
B. Create a BPA Criteria record to evaluate patients age 21 or older, link it to a BPA
SmartSet Base record which includes patient gender of female, and link the SmartSet
Base record to the Pap smear SmartGroup.
C. Create a BPA SmartSet Suggestion record to evaluate patient age 21 or older, link it
to a BPA Criteria record which includes patient gender of female, and link the Criteria
record to the SmartSet.
,D. Create a BPA SmartSet Base record to evaluate patients age 21 or older, link it to -
correct answerCreate a BPA Criteria record to evaluate patients age 21 or older, link it
to a BPA SmartSet Base record which includes patient gender of female, and link the
SmartSet Base record to the Pap smear SmartGroup.
Clinicians currently use a Hepatic Function order panel that contains several labs. They
would like this panel to be suggested when a reason for visit of jaundice, abdominal
pain, or vomiting is entered. They would also like to restrict the AST, ALT, or Albumin
labs if the patient has already had these lab values entered within the last 2 months.
How can you efficiently accomplish this request? (Choose all answers that apply.)
A. Create a section for the AST, ALT, and Albumin lab orders within the orderable
SmartGroup.
B. Create a BPA criteria record that is evaluating the reasons for visit and link it to the
orderable SmartGroup.
C. Create a BPA criteria record that is evaluating historical labs for AST, ALT, or
Albumin recorded within the last 2 months.
D. Create a BPA SmartSet base record and link it to the BPA criteria record evaluating
the historical labs.
E. Link the BPA SmartSet base record to the section cont - correct answerThis request
is not possible in an orderable SmartGroup.
After assigning a therapy plan to a patient, a clinician can edit the following: (Choose all
answers that apply.)
A. The therapy plan's type
B. An order's interval
C. An order's display name
D. An order's duration - correct answerAn order's interval and An order's duration
When creating a therapy protocol, an administrator can edit the following: (Choose all
answers that apply.)
A. Review scheme
B. An order's frequency
C. The protocol type
D. Category names - correct answerReview scheme, An order's frequency, and The
protocol type
True or False: An administrator adds a hematocrit lab to an existing preference list.
When adding the lab, the administrator intentionally leaves all of the items within the
order composer blank. This ensures that when a user orders the hematocrit lab from
this preference list, the default values will be overridden with blank fields. - correct
answerFalse
True or False: Preference lists created in the Preference List Editor cannot override a
record's details. - correct answerTrue
, When your providers choose "Yes" for Exacerbation (labeled B), they expect to see
additional choices cascade. Currently, nothing happens when they choose "Yes". What
could be the issue? (Choose all that apply.)
A. The Cascade method is set to "Prompt Users" on the Cascading Flowsheet form.
B. There are no groups/rows listed on the Cascading Flowsheet form.
C. The Symptoms Group is configured incorrectly.
D. The wrong Comparison Value is listed on the Cascading Flowsheets form. - correct
answerThere are no groups/rows listed on the Cascading Flowsheet form and The
wrong Comparison Value is listed on the Cascading Flowsheets form.
An administrator is building a flowsheet template and would like one of the groups to
appear only after a clinician chooses "Yes" from the preceding row. To have the group
not appear initials when the clinician opens the flowsheet, what configuration is
required? (Choose all answers that apply.)
A. Do not release that group.
B. In the template, select the Start Removed check box for that group.
C. In the template, do not list that group and select the Restrict Rows check box.
D. There is not a way to prevent a group from appearing immediately. - correct
answerIn the template, select the Start Removed check box for that group.
Your clinicians have asked you to change the "Kidney" button (Synopsis Tab) to "CKD"
(standing for Chronic Kidney Disease). How can you efficiently accomplish this request?
(Choose all that apply.)
A. Open the Kidney Synopsis View record and change the button display to CKD.
B. Click the wrench icon within the Synopsis activity and change the button display to
CKD.
C. Open the profile record which contains the Kidney Synopsis View that is impacting
this workspace and enter CKD in the View Title Override column.
D. Open the department record of the users and on the Outpatient Synopsis screen
update the Display View Title to CKD. - correct answerOpen the Kidney Synopsis View
record and change the button display to CKD and Open the profile record which
contains the Kidney Synopsis View that is impacting this workspace and enter CKD in
the View Title Override column.
The Infections & Rejections Synopsis flowsheet row contains no data. To save space,
how could you configure this row to only appear if data exists? (Choose only one
answer.)
A. Within the Infections/Rejections Synopsis View Section, go to the Display column
and enter "Data present".
B. Within the Infections & Rejections Synopsis flowsheet, go to the Filter/Format column
and enter "no value".
C. Within the Infections & Rejections Synopsis flowsheet, go to the Min column and
enter "1".
D. Within the Infections & Rejections Synopsis flowsheet, go to the Hide if Empty
column and enter "Yes". - correct answerWithin the Infections & Rejections Synopsis
flowsheet, go to the Hide if Empty column and enter "Yes".
Immunizations & Referrals (2025/2026 Edition)
Your providers would like the question "Is the patient pregnant?" to appear when
ordering an X-ray for female patients aged 12 or older. After the order-specific question
has been created, how will you accomplish this request? (Choose only one answer.)
A. Link the question to the X-Ray Default Settings screen of System Definitions.
B. Link the question to the "X-ray orderables" procedure category.
C. Link the question to the OCC at the procedure category level.
D. Link the question to the imaging procedure record. - correct answerLink the question
to the "X-ray orderables" procedure category.
Which of the following can be specified in System Definitions or in an OCC linked to
System Definitions? (Choose all that apply.)
A. Display Items
B. Default Order Class
C. Default Priority
D. Default Status
E. Item buttons for Class
F. Order-specific question for pediatric patients - correct answerDisplay Items, Default
Priority, and Item buttons for Class
An ankle x-ray procedure is linked to the procedure category "X-ray orderables." All
other procedures linked to this category have three class buttons, while this procedure
has four. All orders within the category have the same allowed classes, so what is
causing this difference? (Choose all that apply.)
A. There are three class buttons defined in the procedure category.
B. This procedure has one defined class button.
C. There are three available classes set up in the procedure category.
D. There are four class buttons defined in the procedure record. - correct answerThere
are three class buttons defined in the procedure category and There are four class
buttons defined in the procedure record.
Referrals at your organization have appropriate display items appear within the order
composer based off of the value selected for Class (either "Internal Referral" or
"Outgoing Referral"). To achieve this, a minimum of three OCC records must be created
and linked to the procedure category. What are the contexts of the OCC records?
(Choose only one answer.)
A. Referral-Ambulatory, Ambulatory, External Referral-Ambulatory
B. Referral-Ambulatory, Incoming Referral-Ambulatory, External-Referral-Ambulatory
C. Ambulatory, Ambulatory-Referral, External Referral-Ambulatory
,D. Ambulatory, Internal Referral-Ambulatory, External Referral-Ambulatory - correct
answerAmbulatory, Internal Referral-Ambulatory, External Referral-Ambulatory
After ordering a varicella vaccination procedure, a clinician will open the Immunizations
activity to administer the immunization and a default dose of 0.5 mL appears. When a
clinician is documenting a patient-reported varicella vaccination using the same varicella
immunization record, what will appear for the dose? (Choose only one answer.)
A. Blank fields
B. 0.5 mL
C. The "mL" unit, but a missing numeric value
D. A stop sign, indicating the fields are required - correct answerBlank fields
Resources
Part I: When selecting the eye culture lab test from within the Conjunctivitis SmartSet,
its Status is Future. But, when clinicians in the ophthalmology department order the
same test from their department preference list, the Status is Normal. Why? (Choose
only one answer.)
A. Within the Labs SmartGroup, the eye culture item is listing default values from a
system preference list.
B. SmartSets will display default values from a preference list of the user who has
selected the order.
C. Within the Labs SmartGroup, the eye culture item has an override value for status.
D. The Conjunctivitis SmartSet has overridden the default status for all labs it - correct
answerWithin the Labs SmartGroup, the eye culture item has an override value for
status.
What BPA type would be needed to suggest an allergic rhinitis SmartSet for any office
visit scheduled in an allergy department? (Choose only one answer.)
A. Criteria
B. SmartSet Suggestion
C. SmartSet Base
D. This is not possible - correct answerSmartSet Suggestion
Clinicians have requested that the Pap smear SmartGroup only be available for female
patients age 21 or older when the Adult Preventative Interventions SmartSet is opened.
How could you satisfy this request? (Choose only one answer.)
A. Create a BPA SmartSet Base record to restrict Labs section for female patients and
suggest it for male patients. Create a BPA Criteria record to suggest the SmartSet for
patients age 21 or older.
B. Create a BPA Criteria record to evaluate patients age 21 or older, link it to a BPA
SmartSet Base record which includes patient gender of female, and link the SmartSet
Base record to the Pap smear SmartGroup.
C. Create a BPA SmartSet Suggestion record to evaluate patient age 21 or older, link it
to a BPA Criteria record which includes patient gender of female, and link the Criteria
record to the SmartSet.
,D. Create a BPA SmartSet Base record to evaluate patients age 21 or older, link it to -
correct answerCreate a BPA Criteria record to evaluate patients age 21 or older, link it
to a BPA SmartSet Base record which includes patient gender of female, and link the
SmartSet Base record to the Pap smear SmartGroup.
Clinicians currently use a Hepatic Function order panel that contains several labs. They
would like this panel to be suggested when a reason for visit of jaundice, abdominal
pain, or vomiting is entered. They would also like to restrict the AST, ALT, or Albumin
labs if the patient has already had these lab values entered within the last 2 months.
How can you efficiently accomplish this request? (Choose all answers that apply.)
A. Create a section for the AST, ALT, and Albumin lab orders within the orderable
SmartGroup.
B. Create a BPA criteria record that is evaluating the reasons for visit and link it to the
orderable SmartGroup.
C. Create a BPA criteria record that is evaluating historical labs for AST, ALT, or
Albumin recorded within the last 2 months.
D. Create a BPA SmartSet base record and link it to the BPA criteria record evaluating
the historical labs.
E. Link the BPA SmartSet base record to the section cont - correct answerThis request
is not possible in an orderable SmartGroup.
After assigning a therapy plan to a patient, a clinician can edit the following: (Choose all
answers that apply.)
A. The therapy plan's type
B. An order's interval
C. An order's display name
D. An order's duration - correct answerAn order's interval and An order's duration
When creating a therapy protocol, an administrator can edit the following: (Choose all
answers that apply.)
A. Review scheme
B. An order's frequency
C. The protocol type
D. Category names - correct answerReview scheme, An order's frequency, and The
protocol type
True or False: An administrator adds a hematocrit lab to an existing preference list.
When adding the lab, the administrator intentionally leaves all of the items within the
order composer blank. This ensures that when a user orders the hematocrit lab from
this preference list, the default values will be overridden with blank fields. - correct
answerFalse
True or False: Preference lists created in the Preference List Editor cannot override a
record's details. - correct answerTrue
, When your providers choose "Yes" for Exacerbation (labeled B), they expect to see
additional choices cascade. Currently, nothing happens when they choose "Yes". What
could be the issue? (Choose all that apply.)
A. The Cascade method is set to "Prompt Users" on the Cascading Flowsheet form.
B. There are no groups/rows listed on the Cascading Flowsheet form.
C. The Symptoms Group is configured incorrectly.
D. The wrong Comparison Value is listed on the Cascading Flowsheets form. - correct
answerThere are no groups/rows listed on the Cascading Flowsheet form and The
wrong Comparison Value is listed on the Cascading Flowsheets form.
An administrator is building a flowsheet template and would like one of the groups to
appear only after a clinician chooses "Yes" from the preceding row. To have the group
not appear initials when the clinician opens the flowsheet, what configuration is
required? (Choose all answers that apply.)
A. Do not release that group.
B. In the template, select the Start Removed check box for that group.
C. In the template, do not list that group and select the Restrict Rows check box.
D. There is not a way to prevent a group from appearing immediately. - correct
answerIn the template, select the Start Removed check box for that group.
Your clinicians have asked you to change the "Kidney" button (Synopsis Tab) to "CKD"
(standing for Chronic Kidney Disease). How can you efficiently accomplish this request?
(Choose all that apply.)
A. Open the Kidney Synopsis View record and change the button display to CKD.
B. Click the wrench icon within the Synopsis activity and change the button display to
CKD.
C. Open the profile record which contains the Kidney Synopsis View that is impacting
this workspace and enter CKD in the View Title Override column.
D. Open the department record of the users and on the Outpatient Synopsis screen
update the Display View Title to CKD. - correct answerOpen the Kidney Synopsis View
record and change the button display to CKD and Open the profile record which
contains the Kidney Synopsis View that is impacting this workspace and enter CKD in
the View Title Override column.
The Infections & Rejections Synopsis flowsheet row contains no data. To save space,
how could you configure this row to only appear if data exists? (Choose only one
answer.)
A. Within the Infections/Rejections Synopsis View Section, go to the Display column
and enter "Data present".
B. Within the Infections & Rejections Synopsis flowsheet, go to the Filter/Format column
and enter "no value".
C. Within the Infections & Rejections Synopsis flowsheet, go to the Min column and
enter "1".
D. Within the Infections & Rejections Synopsis flowsheet, go to the Hide if Empty
column and enter "Yes". - correct answerWithin the Infections & Rejections Synopsis
flowsheet, go to the Hide if Empty column and enter "Yes".
