CSX- Freight Conductor final UPDATED ACTUAL Questions and CORRECT
Answers
202.2- What's the indication when a flag, hand or lantern
Proceed
signal has raised or lowered vertically
6104- Your key train has arrived at Midway Yard to make
a pickup of 20 cars. You will place those cars at the lead
end of the train. After adding the cars to the train and CT-168
making the appropriate brake test, what documents must
be updated before departing?
4509.1- T/F
When handling 1 or more clearance implicated shipments
in your train is the follow statement True or False? True
Do not enter a yard terminal where a yard master on duty,
until you tell the yard master of the shipment.
4505.1- When handling a train with one or more clearance
implicated shipments, what instructions must be included
Clearance bureau instructions
as part of your CXT train documents if the shipment was
not authorized verbally?
301.2- Your train is authorized on the Atlanta subdivision
at 50mph. While descending the grade, you exceed the Crew members direct the locomotive operator to slow the
speed on a grade to 53mph. What action is required? train to the authorized speed
(Your speeding by 3 mph)
1) Crew members direct the locomotive operators to stop
301.2- Your speeding by 7 mph. What do you do? the train immediately and report the occurrence to the
proper authority
(2 Answer)
2) Must not proceed unit released
401.3- Rolling equipment must not foul the track until it 1) Switches and derails connected with the movement are
can visually be determine that? properly lined
, (2 Answer) 2) The attend route is clear
407.1- You been instructed by the yard master to leave
1) Standing outside the rail off the end of the cross top of
cars in track 14. Where clearance points are not identified
the connected track extend arm toward equipment
or visible. Identify steps required to determine the clear-
ance point. 2) Position equipment an additional 50ft in the track be-
yond the location where it can not longer be touched
(2 Answers)
401.8- T/F
After operating a switch or derail the employee must make
certain that the switch is properly lined and the switch
1) False
point fits properly. What else is true?
2) False
1) It is equipped with a reflective marking on the handle?
3) True
2) It is at least 100ft from a road crossing?
4) True
3) The lever is latched?
4) Device is locked if it's equipped with a lock
406.8- When shoving for purpose other then making a
1) Improperly lined switch
coupling. You must stop 150ft short of a?
2) Derail
(2 Answers)
308.1- Train Q79510 is operating in CP territory with max-
imum speed of 60 mph. The train experiences a train initi- Operating at a train speed not to exceed 20 mph for one
ated undesired emergency brake application. After stop- train length then be governed by authority for movement
ping, the conductor inspects the train, repairs the hose rules for that territory
that cause the emergency. After all reports to dispatcher
, are made the train is permitted to proceed. How must the
train operate?
406.3- You been switching cars in a rail yard and you 1) Visually protect leading end of movement at all times
doubled two tracks together. While shoving your cars into
one track, you must? 2) Be position on the ground clear of tracks, riding the
leading end, or constantly modern the shove, using tech-
(2 Answers) nology
406.3- Who is responsible for protecting a shoving or
Any qualified employee
pushing movement?
406.2- After coupling your locomotive to a cut of cars.
Stretch the slack to ensure couplers are made
What must you do next?
406.3- When shoving or pushing a train, what is your The leading end of the movement must be visually pro-
responsibility? tected by a qualified employee at all times
300.4- What speed must not be exceeded when a train is
operating through a hand operating crossover not to and 10 mph
from the main track?
300.2- Unless otherwise specified speed restrictions ap-
Entire train
plied to the train?
300.2- Which of the following statements is true authoriz-
The must not be exceeded
ing train speed?
300.4- Your train is leaving the main track through a hand
operated switch, and entering a non signaled siding.
15 mph
What speed cannot be exceeded through the switch un-
less specified otherwise?
300.4 Trains using non signaled sidings move at a speed
that will permit 1/2 range of vision short of trains, cars,
25 mph
on track equipment, obstructions, stop signal derail, or
improperly lined switches must not exceed what speed?
Answers
202.2- What's the indication when a flag, hand or lantern
Proceed
signal has raised or lowered vertically
6104- Your key train has arrived at Midway Yard to make
a pickup of 20 cars. You will place those cars at the lead
end of the train. After adding the cars to the train and CT-168
making the appropriate brake test, what documents must
be updated before departing?
4509.1- T/F
When handling 1 or more clearance implicated shipments
in your train is the follow statement True or False? True
Do not enter a yard terminal where a yard master on duty,
until you tell the yard master of the shipment.
4505.1- When handling a train with one or more clearance
implicated shipments, what instructions must be included
Clearance bureau instructions
as part of your CXT train documents if the shipment was
not authorized verbally?
301.2- Your train is authorized on the Atlanta subdivision
at 50mph. While descending the grade, you exceed the Crew members direct the locomotive operator to slow the
speed on a grade to 53mph. What action is required? train to the authorized speed
(Your speeding by 3 mph)
1) Crew members direct the locomotive operators to stop
301.2- Your speeding by 7 mph. What do you do? the train immediately and report the occurrence to the
proper authority
(2 Answer)
2) Must not proceed unit released
401.3- Rolling equipment must not foul the track until it 1) Switches and derails connected with the movement are
can visually be determine that? properly lined
, (2 Answer) 2) The attend route is clear
407.1- You been instructed by the yard master to leave
1) Standing outside the rail off the end of the cross top of
cars in track 14. Where clearance points are not identified
the connected track extend arm toward equipment
or visible. Identify steps required to determine the clear-
ance point. 2) Position equipment an additional 50ft in the track be-
yond the location where it can not longer be touched
(2 Answers)
401.8- T/F
After operating a switch or derail the employee must make
certain that the switch is properly lined and the switch
1) False
point fits properly. What else is true?
2) False
1) It is equipped with a reflective marking on the handle?
3) True
2) It is at least 100ft from a road crossing?
4) True
3) The lever is latched?
4) Device is locked if it's equipped with a lock
406.8- When shoving for purpose other then making a
1) Improperly lined switch
coupling. You must stop 150ft short of a?
2) Derail
(2 Answers)
308.1- Train Q79510 is operating in CP territory with max-
imum speed of 60 mph. The train experiences a train initi- Operating at a train speed not to exceed 20 mph for one
ated undesired emergency brake application. After stop- train length then be governed by authority for movement
ping, the conductor inspects the train, repairs the hose rules for that territory
that cause the emergency. After all reports to dispatcher
, are made the train is permitted to proceed. How must the
train operate?
406.3- You been switching cars in a rail yard and you 1) Visually protect leading end of movement at all times
doubled two tracks together. While shoving your cars into
one track, you must? 2) Be position on the ground clear of tracks, riding the
leading end, or constantly modern the shove, using tech-
(2 Answers) nology
406.3- Who is responsible for protecting a shoving or
Any qualified employee
pushing movement?
406.2- After coupling your locomotive to a cut of cars.
Stretch the slack to ensure couplers are made
What must you do next?
406.3- When shoving or pushing a train, what is your The leading end of the movement must be visually pro-
responsibility? tected by a qualified employee at all times
300.4- What speed must not be exceeded when a train is
operating through a hand operating crossover not to and 10 mph
from the main track?
300.2- Unless otherwise specified speed restrictions ap-
Entire train
plied to the train?
300.2- Which of the following statements is true authoriz-
The must not be exceeded
ing train speed?
300.4- Your train is leaving the main track through a hand
operated switch, and entering a non signaled siding.
15 mph
What speed cannot be exceeded through the switch un-
less specified otherwise?
300.4 Trains using non signaled sidings move at a speed
that will permit 1/2 range of vision short of trains, cars,
25 mph
on track equipment, obstructions, stop signal derail, or
improperly lined switches must not exceed what speed?
