8/11/25, 12:39 PM Dante Certification Level 2 (2nd Edition) Exam Study Guide Questions with Correct Answers 2025 latest update!! Flashcards | Qui…
Dante Certification Level 2 (2nd Edition) Exam
Study Guide Questions with Correct Answers
2025 latest update!!
Save
Terms in this set (23)
The Dante clock leader Preferred Leader checked.
election is an automatic
process. However, you
can manually influence
which device will win the
election. What option
would give a device the
highest priority in the
election process?
Suppose a Dante device Yes. Minimum recommended latency could be as low
has one channel and two as 0.5 msec.
transmit flows. Can it
connect to three different
receiving devices?
Approximately how much 6Mbps
bandwidth does a unicast
audio flow use? (4-ch, 24-
bit, 48kHz, 1msec latency)
https://quizlet.com/1065022874/dante-certification-level-2-2nd-edition-exam-study-guide-questions-with-correct-answers-2025-latest-update-flash-card… 1/5
, 8/11/25, 12:39 PM Dante Certification Level 2 (2nd Edition) Exam Study Guide Questions with Correct Answers 2025 latest update!! Flashcards | Qui…
Dante Controller can True
apply information in a
Dante preset to a device
of a different model. For
instance, if a 4-channel
70V amplifier is replaced
with an 8-channel model,
it could save the IP
settings, device name, as
well as channel labels and
subscriptions for the first
four channels.
When recalling a Dante True
Preset, you can choose to
recall everything or limit
the recall to specific
features and/or specific
devices.
What happens if multiple Both will be elevated in the clock election process,
devices have the only one of those two will be come the clock leader.
Preferred Leader
checkbox marked?
When using redundant The primary and secondary networks must remain in
Dante networks, how do separate broadcast domains (could be a VLAN) and
we configure the each network must use separate subnets.
switches?
Suppose a Dante device In Dante Controller, make sure the "External Clock"
that is chasing an external checkbox is marked for this device.
clock (like word clock or
video sync). What setting
must be checked in Dante
Controller?
https://quizlet.com/1065022874/dante-certification-level-2-2nd-edition-exam-study-guide-questions-with-correct-answers-2025-latest-update-flash-card… 2/5
Dante Certification Level 2 (2nd Edition) Exam
Study Guide Questions with Correct Answers
2025 latest update!!
Save
Terms in this set (23)
The Dante clock leader Preferred Leader checked.
election is an automatic
process. However, you
can manually influence
which device will win the
election. What option
would give a device the
highest priority in the
election process?
Suppose a Dante device Yes. Minimum recommended latency could be as low
has one channel and two as 0.5 msec.
transmit flows. Can it
connect to three different
receiving devices?
Approximately how much 6Mbps
bandwidth does a unicast
audio flow use? (4-ch, 24-
bit, 48kHz, 1msec latency)
https://quizlet.com/1065022874/dante-certification-level-2-2nd-edition-exam-study-guide-questions-with-correct-answers-2025-latest-update-flash-card… 1/5
, 8/11/25, 12:39 PM Dante Certification Level 2 (2nd Edition) Exam Study Guide Questions with Correct Answers 2025 latest update!! Flashcards | Qui…
Dante Controller can True
apply information in a
Dante preset to a device
of a different model. For
instance, if a 4-channel
70V amplifier is replaced
with an 8-channel model,
it could save the IP
settings, device name, as
well as channel labels and
subscriptions for the first
four channels.
When recalling a Dante True
Preset, you can choose to
recall everything or limit
the recall to specific
features and/or specific
devices.
What happens if multiple Both will be elevated in the clock election process,
devices have the only one of those two will be come the clock leader.
Preferred Leader
checkbox marked?
When using redundant The primary and secondary networks must remain in
Dante networks, how do separate broadcast domains (could be a VLAN) and
we configure the each network must use separate subnets.
switches?
Suppose a Dante device In Dante Controller, make sure the "External Clock"
that is chasing an external checkbox is marked for this device.
clock (like word clock or
video sync). What setting
must be checked in Dante
Controller?
https://quizlet.com/1065022874/dante-certification-level-2-2nd-edition-exam-study-guide-questions-with-correct-answers-2025-latest-update-flash-card… 2/5
