VERIFIED ANSWERS (ALREADY GRADED A+)
what component of the EOT is located in the fireroom and CIC? Correct answer-double indicator
what is the underwater log system circuit designation? Correct answer-circuit Y
an open fault will affect all stations on a sound-powered circuit? Correct answer-false
how is each circuit jackbox connected to the switchboard? Correct answer-switchjack
the audio signal is converted from electrical signal to sound waves in the ______ stage of the 3 part
audio model? Correct answer-output
the 2 operational test procedures are the silent test and talk test Correct answer-false
what is the circuit designation for steering emergency? Correct answer-circuit LB
what has a spinning body that tends to keep its spin axis rigidity pointed in a fixed direction in space?
Correct answer-gyroscope
what consists of a mass suspended from a calibrated leaf spring similar to a pendulum? Correct
answer-E-transformer
what allows the inner gimbal to tilt about the horizontal axis? Correct answer-y-axis
secondary modules display the fluid levels of_____. Correct answer-remote tanks
what consists of up to 5 wind sensor units, a single wind processor unit containing two subprocessors
and high & low end display? Correct answer-MWS
what switch would you use for circuit DL? Correct answer-IC/DM
fault detection Correct answer-17 +/- 3
what is not a rating for microphones? Correct answer-capacity
in the 3 part audio model which part manipulates the signal? Correct answer-processor
general alarms are Correct answer-red
chemical alarms are Correct answer-yellow
collision alarams are Correct answer-green
unassigned alarms are Correct answer-grey
flight crash alarms are Correct answer-red
class ___ is yellow and is used for safety (1MC) Correct answer-1
, class ___ is black and is used prior to going underway (gyroscopes) Correct answer-2
class ___ is red and is used for fire control Correct answer-3
class ___ is white and is used for convenience (TV) Correct answer-4
highest priority alarm Correct answer-collision
second lowest priority alarm Correct answer-unassigned
second highest priority alarm Correct answer-chemical
system for A listers? Correct answer-A-call
where is the sound-powered amplifier located? Correct answer-loud engineer space
where is the K1 relay located? Correct answer-switching circuit
POT/PROM circuit designation? Correct answer-M
EOT circuit designation? Correct answer-MB
what mechanically leads to the rudder stop? Correct answer-rudder angle transmitter
what does circuit SB do? Correct answer-detects salinity
saturable reactor power supply converts ____ to ____. Correct answer-AC to low DC
what does the magnetic control amplifier do? Correct answer-automatically adjusts if necessary
what does the ICCP do? Correct answer-prevent corrosion
what are tested and calibrated with a built-in float simulator? Correct answer-reciever modules
what alarm has the upper lamp off, lower lamp pn and a steady tone? Correct answer-supervisory
alarm
what alarm has the upper lamp on, lower lamp off and is silent? Correct answer-normal
what alarm has the upper lamp off, lower lamp on and is silent? Correct answer-cutout
what component can the navigator use to quickly plot a point relative to a ships own position?
Correct answer-compass rose projector
on the main ic switchboard, where are toggle switches found? Correct answer-ACO switch
which switch has a 10 AMP rating? Correct answer-JR switch
on the main ic switchboard what do you do with a phase to phase reading of 130VAC? Correct
answer-notify EOOW