Introduction to Joint Multi-TDL Network
(MTN) Operations JT101 (Post Test 2)
Questions and Answers
21) Which source document is used to determine foreign JTIDS/MIDS EMC restrictions?
JTIDS/MIDS Multinational Ad Hoc Spectrum Support Working Group Notebook
22) Which of the following is true about the basic characteristics of the MIDS LVT family of
Link 16 terminals? Select all that apply. [Remediation Accessed :N] Light-weight
replacements for JTIDS terminals
Fully interoperable with other Link 16 Terminals
All MIDS LVTs are capable of 1,000 watts of power output
Used only by the U.S. military
Several variants: LVTs (1-11)
SELECTED ALL BUT SEVERAL VARIANTS...WRONG
23) Which of the following is a function of Link 16 terminals? Select all that apply.
[Remediation Accessed :N] Relay
Relative Navigation
Built in Test
Data Recording
Secure Voice
, WRONG
24) Which of the following is a function provided by the Link 16 terminal's JREAP C
connection? J-Series messages using JREAP C protocol
25) Which of the following is true about the SDU used by the MIDS LVTs? Select all that apply.
[Remediation Accessed :N] Certified to secure SECRET data and below
Uses the Programmable KOV-55 LVT Crypto Module (LCM)
Doesn't perform automatic key rollover
Uses the KGV-8 Thornton
WRONG
26) Match the correct Built in Test (BIT) to the correct description. Start-Up BIT (a)
Conducted any time the terminal is switched from the OFF or Standby (STBY) state to the ON
state. It is a self-test that will detect general Line Replaceable Unit (LRU) and Shop Replaceable
Unit (SRU) failures.
Operational BIT (b) This BIT is always running in the background while the terminal is on. It
will detect a degradation in the terminal's performance, communication/network degradation, or
terminal failure such as a LRU or SRU fail.
(MTN) Operations JT101 (Post Test 2)
Questions and Answers
21) Which source document is used to determine foreign JTIDS/MIDS EMC restrictions?
JTIDS/MIDS Multinational Ad Hoc Spectrum Support Working Group Notebook
22) Which of the following is true about the basic characteristics of the MIDS LVT family of
Link 16 terminals? Select all that apply. [Remediation Accessed :N] Light-weight
replacements for JTIDS terminals
Fully interoperable with other Link 16 Terminals
All MIDS LVTs are capable of 1,000 watts of power output
Used only by the U.S. military
Several variants: LVTs (1-11)
SELECTED ALL BUT SEVERAL VARIANTS...WRONG
23) Which of the following is a function of Link 16 terminals? Select all that apply.
[Remediation Accessed :N] Relay
Relative Navigation
Built in Test
Data Recording
Secure Voice
, WRONG
24) Which of the following is a function provided by the Link 16 terminal's JREAP C
connection? J-Series messages using JREAP C protocol
25) Which of the following is true about the SDU used by the MIDS LVTs? Select all that apply.
[Remediation Accessed :N] Certified to secure SECRET data and below
Uses the Programmable KOV-55 LVT Crypto Module (LCM)
Doesn't perform automatic key rollover
Uses the KGV-8 Thornton
WRONG
26) Match the correct Built in Test (BIT) to the correct description. Start-Up BIT (a)
Conducted any time the terminal is switched from the OFF or Standby (STBY) state to the ON
state. It is a self-test that will detect general Line Replaceable Unit (LRU) and Shop Replaceable
Unit (SRU) failures.
Operational BIT (b) This BIT is always running in the background while the terminal is on. It
will detect a degradation in the terminal's performance, communication/network degradation, or
terminal failure such as a LRU or SRU fail.
