ASNT VT LEVEL II EXAM (ACTUAL EXAM 2025) | ALL
QUESTIONS AND CORRECT ANSWERS | ALREADY
GRADED A+ | LATEST EXAM | VERIFIED ANSWERS
B. - ANSWER✔✔-1. Per ASNT Section XI, NDE personnel shall be recertified:
A. every 5 years by re-examination
B. every 3 years by retraining and retesting
C. every 3 years based on continuing satisfactory performance
D. annually by retraining
B. - ANSWER✔✔-2. Per SNT-TC-1A, when an employee leaves his employer:
A. his certification automatically transfers to his new employer
B. his certification is automatically terminated
C. he must take an examination to be certified by the new company
D. he may not be certified by the new employer for at least 3 months
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 1
,D. - ANSWER✔✔-3. Per SNT-TC-1A, certification of NDE personnel is the
responsibility of the:
A. ASME
B. manufacturer
C. NRC
D. employer
B. - ANSWER✔✔-4. A variation or interpretation in the normal physical structure or
configuration of a part is called a:
A. Flaw
B. discontinuity
C. defect
D. fault
D. - ANSWER✔✔-5. Indications caused by repeatd loading, bending or by vibrating
stresses are called:
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 2
,A. mass hardness
B. lamellar testing
C. hot tears
D. fatigue cracks
B. - ANSWER✔✔-6. A group of joining processes which produces coalescence of
materials by heating them to a suitable tempertaure and by using filler metal having a
liquidus below 450 degree C (840 degree F) and below the solidus of the base metal is
called:
A. brazing
B. soldering
C. resistance welding
D. arc welding
B. - ANSWER✔✔-7. SCC is a synergistic action of:
A. steel and cracks
B. stress and corrosion
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 3
, C. structure and coatings
D. slag and craters
C. - ANSWER✔✔-8. Severe grinding cracks appear as:
A. wave-like patterns
B. widely
C. lattice
D. deep crevices
B. - ANSWER✔✔-9. Grinding cracks are caused by:
A. too light of pressure during grinding
B. overheating during grinding
C. grinding too large of an area
D. grinding with very fast motion of the grinder
B. - ANSWER✔✔-10. A process that joins two members together by using capillary
action to flow the filler material is called:
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 4
QUESTIONS AND CORRECT ANSWERS | ALREADY
GRADED A+ | LATEST EXAM | VERIFIED ANSWERS
B. - ANSWER✔✔-1. Per ASNT Section XI, NDE personnel shall be recertified:
A. every 5 years by re-examination
B. every 3 years by retraining and retesting
C. every 3 years based on continuing satisfactory performance
D. annually by retraining
B. - ANSWER✔✔-2. Per SNT-TC-1A, when an employee leaves his employer:
A. his certification automatically transfers to his new employer
B. his certification is automatically terminated
C. he must take an examination to be certified by the new company
D. he may not be certified by the new employer for at least 3 months
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 1
,D. - ANSWER✔✔-3. Per SNT-TC-1A, certification of NDE personnel is the
responsibility of the:
A. ASME
B. manufacturer
C. NRC
D. employer
B. - ANSWER✔✔-4. A variation or interpretation in the normal physical structure or
configuration of a part is called a:
A. Flaw
B. discontinuity
C. defect
D. fault
D. - ANSWER✔✔-5. Indications caused by repeatd loading, bending or by vibrating
stresses are called:
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 2
,A. mass hardness
B. lamellar testing
C. hot tears
D. fatigue cracks
B. - ANSWER✔✔-6. A group of joining processes which produces coalescence of
materials by heating them to a suitable tempertaure and by using filler metal having a
liquidus below 450 degree C (840 degree F) and below the solidus of the base metal is
called:
A. brazing
B. soldering
C. resistance welding
D. arc welding
B. - ANSWER✔✔-7. SCC is a synergistic action of:
A. steel and cracks
B. stress and corrosion
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 3
, C. structure and coatings
D. slag and craters
C. - ANSWER✔✔-8. Severe grinding cracks appear as:
A. wave-like patterns
B. widely
C. lattice
D. deep crevices
B. - ANSWER✔✔-9. Grinding cracks are caused by:
A. too light of pressure during grinding
B. overheating during grinding
C. grinding too large of an area
D. grinding with very fast motion of the grinder
B. - ANSWER✔✔-10. A process that joins two members together by using capillary
action to flow the filler material is called:
COPYRIGHT © 2025 BY OLIVIA GREENWAYS, ALL RIGHTS RESERVED 4
