CAD Civil 3D CH:7-11 Questions With Verified
Correct Answers!!
The shape of the grip that can move the PVI position of a profile and change the slope of both
tangents is ______.
Answer - ✔✔Upright Triangle
Which of the following statements regarding Design Checks are correct?
(select all correct answers) - ✔✔Design Checks can utilize standard ASHTO or Custom
Criteria Files
Design Checks can utilize Custom Design Check Sets, which can designate settings for both
Line and Curve design parameters.
When working with profiles, the abbreviation PVI stands for: - ✔✔Point of Vertical
Intersection
To create and display a surface profile in a drawing, which of the following are required?
(select all correct answers) - ✔✔A Profile View
A Surface
An Alignment
The Profile ______ command opens the geometric data for a profile within the Panorama
window. - ✔✔Grid View
A straight-line segment within a profile is called ______________. - ✔✔a Tangent
, The grid and annotation that houses one or more profiles is called a profile _____________. -
✔✔View
A vertical curve at the top of a hill where the grade leading into the curve is greater than the
curve leading out is called a _______ curve. - ✔✔Crest
Where in Civil 3D do you assign a design Check set or design criteria file to a profile? -
✔✔Profile Properties dialog box
You can get information about a design check violation by hovering your cursor over the
warning symbol. - ✔✔True
Profile View Bands have type options for Profile Data, Horizontal Geometry, Vertical Geometry,
Superelevations, and more. - ✔✔True
The lowest elevation in a ditch, or on the inside of a pipe or drainage structure, is referred to as
the ____. - ✔✔Invert
You can group several profile bands together which can then be applied to a profile views all at
once. These are called Profile View Band ________. - ✔✔Set
Profile View Bands can be located _____________. - ✔✔along the bottom of the Profile
View
along the top of the Profile View
Which of the following would change as a result of assigning a different profile style to a
profile? - ✔✔Linetype
In a drawing that has a horizontal scale of 1" = 50' and a vertical scale of 1" = 5', the vertical
exaggeration is: - ✔✔10
Correct Answers!!
The shape of the grip that can move the PVI position of a profile and change the slope of both
tangents is ______.
Answer - ✔✔Upright Triangle
Which of the following statements regarding Design Checks are correct?
(select all correct answers) - ✔✔Design Checks can utilize standard ASHTO or Custom
Criteria Files
Design Checks can utilize Custom Design Check Sets, which can designate settings for both
Line and Curve design parameters.
When working with profiles, the abbreviation PVI stands for: - ✔✔Point of Vertical
Intersection
To create and display a surface profile in a drawing, which of the following are required?
(select all correct answers) - ✔✔A Profile View
A Surface
An Alignment
The Profile ______ command opens the geometric data for a profile within the Panorama
window. - ✔✔Grid View
A straight-line segment within a profile is called ______________. - ✔✔a Tangent
, The grid and annotation that houses one or more profiles is called a profile _____________. -
✔✔View
A vertical curve at the top of a hill where the grade leading into the curve is greater than the
curve leading out is called a _______ curve. - ✔✔Crest
Where in Civil 3D do you assign a design Check set or design criteria file to a profile? -
✔✔Profile Properties dialog box
You can get information about a design check violation by hovering your cursor over the
warning symbol. - ✔✔True
Profile View Bands have type options for Profile Data, Horizontal Geometry, Vertical Geometry,
Superelevations, and more. - ✔✔True
The lowest elevation in a ditch, or on the inside of a pipe or drainage structure, is referred to as
the ____. - ✔✔Invert
You can group several profile bands together which can then be applied to a profile views all at
once. These are called Profile View Band ________. - ✔✔Set
Profile View Bands can be located _____________. - ✔✔along the bottom of the Profile
View
along the top of the Profile View
Which of the following would change as a result of assigning a different profile style to a
profile? - ✔✔Linetype
In a drawing that has a horizontal scale of 1" = 50' and a vertical scale of 1" = 5', the vertical
exaggeration is: - ✔✔10
