2025 MICHIGAN BUILDERS LICENSE EXAM TESTBANK , PRACTICE
EXAM AND A LATEST UPDATED STUDY GUIDE COMPLETE 800
ACTUAL QUESTIONSAND CORRECT DETAILED ANSWERS
(VERIFIED SOLUTIONS) A NEW UPDATED VERSION |GUARANTEED
PASS A+ (BRAND NEW!!) FULL REVISED EXAM
Bathrooms must be provided with an aggregate glazing
area no less than _____ square feet, half of which must be
openable.
Answer- 3.
The maximum height of an egress window above the
floor is
Answer- 44 inches.
A basement bedroom must have an egress window with a
clear opening of at least ______ square feet.
Answer- 5.7 sq. ft.
,At least one side-hinged exit door must be in each
dwelling unit, and must be _____ feet wide.
Answer- 3.
A porch more than _____ inches above grade must be
provided with 36" guards.
Answer- 30 inches.
Wall and ceiling finishes shall have a flame-spread
classification of no more than ______.
Answer- 200.
According to code, concrete must reach at least 70% of its
ability within ____________days.
Answer- 7 days.
,A stud used for a non-bearing partitions may not be
notched more than ____% of the stud width.
Answer- 40%.
The Michigan Uniform Energy code applies to new
buildings as well as
Answer- Additions, alterations, renovation and repairs.
___________ is a measure of how well the window or
door assembly conducts heat. The lower the number, the
better insulation the assembly will provide.
Answer- U-factor.
Energy losses from recessed lighting fixtures can often
reach ___% of the total thermal loss of a ceiling.
Answer- 50%.
, Michigan requires a minimum thermal resistance of
____________for mechanical system piping.
Answer- R-3.
Oversized HVAC equipment has a higher initial cost, a
higher operating cost, provides less comfort, and shorter
life expectancy. T or F
Answer- True.
_______ is the compliance route that applies Table
402.1.1 to building envelope components, and is
considered the simplest.
Answer- Prescriptive Path.
___________ can be used to satisfy U-factor and SHGC
requirements.
Answer- Area weighted averages.
EXAM AND A LATEST UPDATED STUDY GUIDE COMPLETE 800
ACTUAL QUESTIONSAND CORRECT DETAILED ANSWERS
(VERIFIED SOLUTIONS) A NEW UPDATED VERSION |GUARANTEED
PASS A+ (BRAND NEW!!) FULL REVISED EXAM
Bathrooms must be provided with an aggregate glazing
area no less than _____ square feet, half of which must be
openable.
Answer- 3.
The maximum height of an egress window above the
floor is
Answer- 44 inches.
A basement bedroom must have an egress window with a
clear opening of at least ______ square feet.
Answer- 5.7 sq. ft.
,At least one side-hinged exit door must be in each
dwelling unit, and must be _____ feet wide.
Answer- 3.
A porch more than _____ inches above grade must be
provided with 36" guards.
Answer- 30 inches.
Wall and ceiling finishes shall have a flame-spread
classification of no more than ______.
Answer- 200.
According to code, concrete must reach at least 70% of its
ability within ____________days.
Answer- 7 days.
,A stud used for a non-bearing partitions may not be
notched more than ____% of the stud width.
Answer- 40%.
The Michigan Uniform Energy code applies to new
buildings as well as
Answer- Additions, alterations, renovation and repairs.
___________ is a measure of how well the window or
door assembly conducts heat. The lower the number, the
better insulation the assembly will provide.
Answer- U-factor.
Energy losses from recessed lighting fixtures can often
reach ___% of the total thermal loss of a ceiling.
Answer- 50%.
, Michigan requires a minimum thermal resistance of
____________for mechanical system piping.
Answer- R-3.
Oversized HVAC equipment has a higher initial cost, a
higher operating cost, provides less comfort, and shorter
life expectancy. T or F
Answer- True.
_______ is the compliance route that applies Table
402.1.1 to building envelope components, and is
considered the simplest.
Answer- Prescriptive Path.
___________ can be used to satisfy U-factor and SHGC
requirements.
Answer- Area weighted averages.
