Class 200 NEIEP final
____________ ____________ should not be disassembled in the field
Oil buffers
Two safety precautions to be followed when first entering the elevator pit are to have the
___________ ___________ ___________open and the pit light on.
Pit stop switch
Tension on the governor rope is maintained by using a
Tension sheave
The ASME Safety Code requires oil buffers for elevators when traveling at a car speed
of
Over 200 FPM
If the pit extends more than ______ feet below the sill of the access door, a fixed
vertical ladder shall be located within reach of the access door.
3
If using a rope fall with 4 sheaves to lift 500 lbs. how much pulling force will be
required? Add 10% to the weight of the load for each sheave.
175 lbs.
OSHA requires that slings used for hoisting be inspected at what intervals?
Each day before using
Spring buffers are used only when the elevator travels at ___________ FPM or less.
200
All measurements necessary for the installation of various components in the pit are
measured with reference to the
guide rails
ASME Safety Code requires that a fully compressed oil buffer should return to its
normal position within _________ seconds after the elevator car or counterweight has
been removed.
90
Wood used to construct a hoisting support must be
scaffold grade
What is a sign of poor quality manila rope?
Dark colored fibers
(True/False) All synthetics are impervious to sunlight.
False
(True/False) Good quality manila rope has a light yellow color with a silvery or pearly
luster.
True
What is the minimum number and proper spacing of crosby clips for rope diameters
from 1/2 to 3/4.
3 crosby clips 6 times the rope diameter apart
The cutting force is applied on the (forward/return) stroke when using a hacksaw.
forward
What type of lumber must be used for decking on scaffolding?
, Scaffold grade
Glass must be either ____________ or ____________ to hold the glass together if
broken.
Laminated, Bonded
What is the required height of an OSHA approved barricade?
42"
(True/False) The star symbol is used on the COP to designate the main floor.
True
The distance between the ladder feet and the wall the top is leaning against should be
___________ of the height of the ladder.
1/4
Generally, what type of rail guides are used on freight elevators?
Solid guide shoes
(True/False)A double insulated tool is an electrical tool having twice the required
insulation.
True
(True/False)The purpose of the elevation view found in final layouts is to show
horizontal locations and dimensions of elevator components.
False
(True/False)The purpose of the elevation view found in final layouts is to show vertical
locations and dimensions of elevator components.
True
What term is used to describe a wire wrapped around a hoisting hook?
Mousing
What type of wrench is used for aligning holes during rail installation?
Spud wrench
What is a common means of assuring equal effect in the shift of hoist rope weight for all
hoistway car positions?
Compensation cables or chains
What should you be aware of when removing a cab for replacement?
The original weight and counterbalancing
When are tie downs required on compensating rope sheaves?
When car speed exceeds 700FPM
If an elevator has a 2000lb capacity load and is counterweighted at 40%, what is the
load presented to the machine, empty car down?
800lbs
What generally is the reason for unequal tension in new hoist ropes?
Improper adjustment at the shackles
When using wedge clamps to secure wire rope, what must be remembered?
Allow the dead end to extend 6 to 9 inches past the socket
Which phase of operation refers to emergency operation of the elevator by firefighters
or other authorized personnel?
Phase II
Which of the following should be installed first when roping an elevator?
Governor rope
What is considered one lay of rope?
____________ ____________ should not be disassembled in the field
Oil buffers
Two safety precautions to be followed when first entering the elevator pit are to have the
___________ ___________ ___________open and the pit light on.
Pit stop switch
Tension on the governor rope is maintained by using a
Tension sheave
The ASME Safety Code requires oil buffers for elevators when traveling at a car speed
of
Over 200 FPM
If the pit extends more than ______ feet below the sill of the access door, a fixed
vertical ladder shall be located within reach of the access door.
3
If using a rope fall with 4 sheaves to lift 500 lbs. how much pulling force will be
required? Add 10% to the weight of the load for each sheave.
175 lbs.
OSHA requires that slings used for hoisting be inspected at what intervals?
Each day before using
Spring buffers are used only when the elevator travels at ___________ FPM or less.
200
All measurements necessary for the installation of various components in the pit are
measured with reference to the
guide rails
ASME Safety Code requires that a fully compressed oil buffer should return to its
normal position within _________ seconds after the elevator car or counterweight has
been removed.
90
Wood used to construct a hoisting support must be
scaffold grade
What is a sign of poor quality manila rope?
Dark colored fibers
(True/False) All synthetics are impervious to sunlight.
False
(True/False) Good quality manila rope has a light yellow color with a silvery or pearly
luster.
True
What is the minimum number and proper spacing of crosby clips for rope diameters
from 1/2 to 3/4.
3 crosby clips 6 times the rope diameter apart
The cutting force is applied on the (forward/return) stroke when using a hacksaw.
forward
What type of lumber must be used for decking on scaffolding?
, Scaffold grade
Glass must be either ____________ or ____________ to hold the glass together if
broken.
Laminated, Bonded
What is the required height of an OSHA approved barricade?
42"
(True/False) The star symbol is used on the COP to designate the main floor.
True
The distance between the ladder feet and the wall the top is leaning against should be
___________ of the height of the ladder.
1/4
Generally, what type of rail guides are used on freight elevators?
Solid guide shoes
(True/False)A double insulated tool is an electrical tool having twice the required
insulation.
True
(True/False)The purpose of the elevation view found in final layouts is to show
horizontal locations and dimensions of elevator components.
False
(True/False)The purpose of the elevation view found in final layouts is to show vertical
locations and dimensions of elevator components.
True
What term is used to describe a wire wrapped around a hoisting hook?
Mousing
What type of wrench is used for aligning holes during rail installation?
Spud wrench
What is a common means of assuring equal effect in the shift of hoist rope weight for all
hoistway car positions?
Compensation cables or chains
What should you be aware of when removing a cab for replacement?
The original weight and counterbalancing
When are tie downs required on compensating rope sheaves?
When car speed exceeds 700FPM
If an elevator has a 2000lb capacity load and is counterweighted at 40%, what is the
load presented to the machine, empty car down?
800lbs
What generally is the reason for unequal tension in new hoist ropes?
Improper adjustment at the shackles
When using wedge clamps to secure wire rope, what must be remembered?
Allow the dead end to extend 6 to 9 inches past the socket
Which phase of operation refers to emergency operation of the elevator by firefighters
or other authorized personnel?
Phase II
Which of the following should be installed first when roping an elevator?
Governor rope
What is considered one lay of rope?
