PLUMBING GRADED A+ TEST REVISION QUESTIONS WITH 100% CORRECT ANSWERS

PLUMBING GRADED A+ TEST REVISION QUESTIONS WITH 100% CORRECT ANSWERS The formula used to express the relationships among the sides of a right triangle is called the - Pythagorean theorem In a formula, the symbol stand for - square root Which of the following sets of dimensions does not describe a right triangle - 24x32x48 To calculate the true offset, which of these formulas would you use - True offset = When calculating an offset using 45° elbows - The rise and the run are equal To calculate the travel when the offset is known, multiply the offset by - The constant (rise2xroll2) If the two parallel sections of the pipe on either end of the offset are not in the same vertical or horizontal plane, the installation is described as a - Rolling offset In a discussion of offsets, "run" is defined as - The horizontal leg of the right triangle To calculate a rolling offset, you can use a folding rule and a - Framing square When calculating the length of the pipe to be cut for an offset, - Subtracting the fitting allowance from the travel A section shows a - Hidden portion of the building A small scale (such as the 1"=20') would most often be used for a - Civil drawing To obtain needed dimensions when using an architectural drawing, a plumber should - Use a the