1
CSLB CONCRETE C8 LICENSE PRACTICE TEST 3
NEWEST 2025 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+||BRAND NEW!
The slope of the side gutter from the edge of the shoulder to the bottom of the
gutter, shall NOT be more than_________. - (answers)6:1
F, warm water needs to be used. - (answers)50,
Explanation:
Additionally insulation covers are also required.
In columns where multiple layers of reinforcement steel is required to be arranged
in groups, the minimum distance between each group must be greater than equal to
__________ inches. - (answers)4
Explanation:
4 inches between each bundle of bars.
The type and quality of the formwork is mainly depends upon the ___________. -
(answers)Concrete Finish Desired.
Roadway drainage involves __________ of surface water from the travelled way. -
(answers)-Collection
-Conveyance
, 2
-Removal
Gloss level of the sealer generally depends on the percentage of ______ that
contains as solids. - (answers)Acrylic Resin
The reinforcement detailing required for slab at the corners is __________ percent
of the reinforcement required at the mid span. - (answers)25.
Explanation:
Additional steel reinforcement required at the corners for uplifting.
The normal dead weight of the concrete considered for formwork design is
_______ lbs/sqft. - (answers)145-150
What is/are the advantage(s) of using the sealer for concrete finish? - (answers)-
Can add value to the surface finish
-Makes concrete easier for maintenance
-Protects against wear & tear
Explanation:
All are the benefits of using the sealer. In addition sealer prevents entry of water,
block the dirt, grease etc.
CSLB CONCRETE C8 LICENSE PRACTICE TEST 3
NEWEST 2025 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
|ALREADY GRADED A+||BRAND NEW!
The slope of the side gutter from the edge of the shoulder to the bottom of the
gutter, shall NOT be more than_________. - (answers)6:1
F, warm water needs to be used. - (answers)50,
Explanation:
Additionally insulation covers are also required.
In columns where multiple layers of reinforcement steel is required to be arranged
in groups, the minimum distance between each group must be greater than equal to
__________ inches. - (answers)4
Explanation:
4 inches between each bundle of bars.
The type and quality of the formwork is mainly depends upon the ___________. -
(answers)Concrete Finish Desired.
Roadway drainage involves __________ of surface water from the travelled way. -
(answers)-Collection
-Conveyance
, 2
-Removal
Gloss level of the sealer generally depends on the percentage of ______ that
contains as solids. - (answers)Acrylic Resin
The reinforcement detailing required for slab at the corners is __________ percent
of the reinforcement required at the mid span. - (answers)25.
Explanation:
Additional steel reinforcement required at the corners for uplifting.
The normal dead weight of the concrete considered for formwork design is
_______ lbs/sqft. - (answers)145-150
What is/are the advantage(s) of using the sealer for concrete finish? - (answers)-
Can add value to the surface finish
-Makes concrete easier for maintenance
-Protects against wear & tear
Explanation:
All are the benefits of using the sealer. In addition sealer prevents entry of water,
block the dirt, grease etc.
