Rope Rescue Ops IFSI Questions with
100% Correct Answers | Latest Update
2024 - Verified
All harness construction and testing standards are covered in NFPA:
1983
T/F: Personnel at a rescue scene whether they are workers, IC, safety officer all have the ability to call a stop during
rope rescue operations if they see an unsafe operation
True
A helmet used for repor rescue should be an approved light weight helmet with a:
3 point strap position under the chin
Care and maintenance of all rescue equipment should be per:
the helmet's manufacturer recommendations
T/F: Care should be taken when rope is under tension not to allow a second rope under tension (a line) to run across
the stationary rope under tension. This will cause a nylon on nylon situation that can burn through a rope quickly
True
Most rope failures are caused by:
Abrasion
Rope that will lose strength when wet is:
Nylon
, Polyester handles shock loads:
Not as well as nylonAll riggin shall have how many checks prior to Loading?
3
All equip. that falls 3 ft onto a hard surface shall be checked for:
Burs, sharp edges, dirt, contaminates, lose parts and deformaties
Rope deployed from the anchor point to the ground should be deployed:
So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be:
Lighter in weight
Rope gloves shall be
Sturdy formfitting gloves with a leather palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the edge attendant to go over the edge and
no farther
False
A class one harness is designed to stop rescuer when he:
Reaches the edge
T/F: Class two harnesses are designed for 600 lb loads and will not keep the rescuer in an up-right position if they
become unconscious.
True
100% Correct Answers | Latest Update
2024 - Verified
All harness construction and testing standards are covered in NFPA:
1983
T/F: Personnel at a rescue scene whether they are workers, IC, safety officer all have the ability to call a stop during
rope rescue operations if they see an unsafe operation
True
A helmet used for repor rescue should be an approved light weight helmet with a:
3 point strap position under the chin
Care and maintenance of all rescue equipment should be per:
the helmet's manufacturer recommendations
T/F: Care should be taken when rope is under tension not to allow a second rope under tension (a line) to run across
the stationary rope under tension. This will cause a nylon on nylon situation that can burn through a rope quickly
True
Most rope failures are caused by:
Abrasion
Rope that will lose strength when wet is:
Nylon
, Polyester handles shock loads:
Not as well as nylonAll riggin shall have how many checks prior to Loading?
3
All equip. that falls 3 ft onto a hard surface shall be checked for:
Burs, sharp edges, dirt, contaminates, lose parts and deformaties
Rope deployed from the anchor point to the ground should be deployed:
So only the amount needed is with a dynamic anchor
Helmets used for rope rescue should be:
Lighter in weight
Rope gloves shall be
Sturdy formfitting gloves with a leather palm
T/F: Fall protection (travel restraint) at the edge shall be long enough for the edge attendant to go over the edge and
no farther
False
A class one harness is designed to stop rescuer when he:
Reaches the edge
T/F: Class two harnesses are designed for 600 lb loads and will not keep the rescuer in an up-right position if they
become unconscious.
True
