AXIS
1.A customer has a lot of motion blur on recordings from a fixed camera. What would
be the most likely setting to address the blurring?
A.Gain level B.Brightness C.Backlight compensation D.Shutter speed: -
D.Shutter speed
2.Which statement is true regarding H.264 and Motion JPEG?
A. The highest bandwidth savings using H.264 compared to Motion JPEG is at high
frame rates B.Bandwidth savings using H.264 has nothing to do
with frame rate, only scene complexity C.Bandwidth savings using H.264 has nothing to
do with frame rate, only Group of Video (GOV) setting D.The highest bandwidth savings
using H.264 compared to Motion JPEG is at low frame rates: A.The highest
bandwidth savings using H.264 compared to Motion JPEG is at high
frame rates
3.Which of the following will allow a customer to have a PTZ camera automat- ically
change between three predefined positions?
A. Configure the camera's I/O ports to control the preset positions B.Use the Guard
Tour capability to switch between the preset positions C.Switch
between the predefined positions using a joystick D.Use the auto tracking ca- pability
to switch between the preset positions: B.Use the Guard Tour capability to
switch between the preset positions
4.In a network surveillance installation, the purpose of a router is to A.Forward the
video stream between networks. B.Forward the video stream to the correct receiver
within a network. C.Separate audio and video traffic to reduce audio latency.
D.Separate the video stream from the camera control signaling.: A.Forward the
video stream between networks
5.Which of the following conditions has to be met to use multicast streaming? A.The
network infrastructure has to support multicast B.The client has to run AXIS Camera
Management or AXIS Camera Station C.The client has to support streaming over RTSP
D.The video device needs to run on firmware version
5.20 or higher: A.The network infrastructure has to support multicast
6.With Axis Coverage Shapes, the designer can
, AXIS
A.See the effect of furniture or other objects blocking field of view. B.View
how varying lighting conditions affect the image. C.Create a 3D view of the
scene the camera will capture. D.Determine at what distance a person can be
identified.: D.Determine at what distance a person can be identified
7.In order to comply with SMPTE standards of HDTV, the camera must meet the
following:
A.Light sensitivity, aspect ratio, resolution, color fidelity B.Aspect ratio, reso
lution, light sensitivity, frame rate C.Light sensitivity, color fidelity, frame
rate,
, AXIS
aspect ratio D.Frame rate, aspect ratio, resolution, color fidelity: D.Frame rate,
aspect ratio, resolution, color fidelity
8.Which is true about P-iris?
A.The P-iris makes use of a novel p-shaped blade that reduces complexity and cost while
maintaining image quality B.In bright situations. P-iris limits the closing of the iris to
avoid blurring caused by diffraction when the iris opening becomes too small C.The P-iris
delivers the optimal depth of field by always using the smallest possible aperture for the
available lightning D.The P-iris makes use of a novel p-shaped blade that allows the iris
to react to rapidly changing lighting conditions: B.In bright situations. P-iris limits
the closing of the iris to avoid blurring caused by diffraction when the iris
opening becomes too small
9.The Axis pixel counter allows a user to
A.Convert pixels to actual distances. B.Verify that the resolution requirements for a
scene are met. C.Determine the file size for each video frame. D.Specify different
exposure zones in a scene.: B.Verify that the resolution requirements for a
scene are met
10.Which of the following actions can be taken using the AXIS T8414 Installa- tion
Display? (Choose two)
A.Power up a PoE camera B.Make snapshots C.Access a camera's home pageD.Reset a
camera to factory default values E.Read user documentation for cameras: A.Power up
a PoE camera B.Make snapshots
11. If a camera is pointed down a hallway with no windows and the color seems
"washed out" or faded, which of the following settings should first be adjusted to
improve the image?
A.Decrease image brightness B.Increase image contrast C.Uncheck backlight
compensation D.Adjust the exposure settings: C.Uncheck backlight compensa-
tion
12.In a switched network with Unicast
A.Data packets are sent only to one recipient no other computers will receive
the data. B.Data packets can only be sent in one direction, for example from
the camera to the server. C.Only one camera at a time can send data packets
1.A customer has a lot of motion blur on recordings from a fixed camera. What would
be the most likely setting to address the blurring?
A.Gain level B.Brightness C.Backlight compensation D.Shutter speed: -
D.Shutter speed
2.Which statement is true regarding H.264 and Motion JPEG?
A. The highest bandwidth savings using H.264 compared to Motion JPEG is at high
frame rates B.Bandwidth savings using H.264 has nothing to do
with frame rate, only scene complexity C.Bandwidth savings using H.264 has nothing to
do with frame rate, only Group of Video (GOV) setting D.The highest bandwidth savings
using H.264 compared to Motion JPEG is at low frame rates: A.The highest
bandwidth savings using H.264 compared to Motion JPEG is at high
frame rates
3.Which of the following will allow a customer to have a PTZ camera automat- ically
change between three predefined positions?
A. Configure the camera's I/O ports to control the preset positions B.Use the Guard
Tour capability to switch between the preset positions C.Switch
between the predefined positions using a joystick D.Use the auto tracking ca- pability
to switch between the preset positions: B.Use the Guard Tour capability to
switch between the preset positions
4.In a network surveillance installation, the purpose of a router is to A.Forward the
video stream between networks. B.Forward the video stream to the correct receiver
within a network. C.Separate audio and video traffic to reduce audio latency.
D.Separate the video stream from the camera control signaling.: A.Forward the
video stream between networks
5.Which of the following conditions has to be met to use multicast streaming? A.The
network infrastructure has to support multicast B.The client has to run AXIS Camera
Management or AXIS Camera Station C.The client has to support streaming over RTSP
D.The video device needs to run on firmware version
5.20 or higher: A.The network infrastructure has to support multicast
6.With Axis Coverage Shapes, the designer can
, AXIS
A.See the effect of furniture or other objects blocking field of view. B.View
how varying lighting conditions affect the image. C.Create a 3D view of the
scene the camera will capture. D.Determine at what distance a person can be
identified.: D.Determine at what distance a person can be identified
7.In order to comply with SMPTE standards of HDTV, the camera must meet the
following:
A.Light sensitivity, aspect ratio, resolution, color fidelity B.Aspect ratio, reso
lution, light sensitivity, frame rate C.Light sensitivity, color fidelity, frame
rate,
, AXIS
aspect ratio D.Frame rate, aspect ratio, resolution, color fidelity: D.Frame rate,
aspect ratio, resolution, color fidelity
8.Which is true about P-iris?
A.The P-iris makes use of a novel p-shaped blade that reduces complexity and cost while
maintaining image quality B.In bright situations. P-iris limits the closing of the iris to
avoid blurring caused by diffraction when the iris opening becomes too small C.The P-iris
delivers the optimal depth of field by always using the smallest possible aperture for the
available lightning D.The P-iris makes use of a novel p-shaped blade that allows the iris
to react to rapidly changing lighting conditions: B.In bright situations. P-iris limits
the closing of the iris to avoid blurring caused by diffraction when the iris
opening becomes too small
9.The Axis pixel counter allows a user to
A.Convert pixels to actual distances. B.Verify that the resolution requirements for a
scene are met. C.Determine the file size for each video frame. D.Specify different
exposure zones in a scene.: B.Verify that the resolution requirements for a
scene are met
10.Which of the following actions can be taken using the AXIS T8414 Installa- tion
Display? (Choose two)
A.Power up a PoE camera B.Make snapshots C.Access a camera's home pageD.Reset a
camera to factory default values E.Read user documentation for cameras: A.Power up
a PoE camera B.Make snapshots
11. If a camera is pointed down a hallway with no windows and the color seems
"washed out" or faded, which of the following settings should first be adjusted to
improve the image?
A.Decrease image brightness B.Increase image contrast C.Uncheck backlight
compensation D.Adjust the exposure settings: C.Uncheck backlight compensa-
tion
12.In a switched network with Unicast
A.Data packets are sent only to one recipient no other computers will receive
the data. B.Data packets can only be sent in one direction, for example from
the camera to the server. C.Only one camera at a time can send data packets
