1
Autodesk
Autodesk Inventor
Certification Test Exam
Questions with Correct
Verified Answers, Already
Passed! (Complete &
Accurate)
Geometric Entities - ANS ✓Basic Geometry from which models are built,
such as lines and circles.
Graphics Window - ANS ✓The active modelling area in which sketches,
constraints, features, or parts, and assemblies are created and edited
Horizontal - ANS ✓A constraint that causes the lines drawn to be parallel
to the x-axis.
Isometric Projection - ANS ✓Three dimensional drawing made up of
equal angles of 120 degrees, most common 3-D drawing used in industry.
Isometric View - ANS ✓Three dimensional drawing made up of equal
angles of 120 degrees, most common 3-D drawing used in industry.
(Similar to Above)
Autodesk Inventor Certification Test
, 2
Autodesk
Mirror - ANS ✓To flip a shape over a line of symmetry and double the
image.
Model - ANS ✓A visual, mathematical, or 3D representation in detail of an
object or design, often smaller than the original. A model is often used to
test ideas, make changes to a design and to learn more about what would
happen to a similar, real object.
Multiview Drawing - ANS ✓A graphical representation of a 3D object on
one plane using two or more views.
Oblique projection - ANS ✓Three dimensional drawing where one face is
seen squarely in true size and shape. The depth dimensions go back at
angles, usually 15, 30, or 45 degrees. Used when most information on
drawing is on the front of the object.
Offset - ANS ✓To make up for; to compensate for; to counteract. (The
amount by which something is out of line.)
Panning - ANS ✓Term used to describe lateral movement by pressing and
holding the mouse wheel.
Parallel - ANS ✓A constraint that causes 2 or more lines to be equal
distance from each other. OR Lines, planes or surfaces side by side and
having the same distance continuously between them.
Parametric Modelling - ANS ✓Feature based modelling based on
geometric definitions that can be changed at any time in the design process.
Autodesk Inventor Certification Test
Autodesk
Autodesk Inventor
Certification Test Exam
Questions with Correct
Verified Answers, Already
Passed! (Complete &
Accurate)
Geometric Entities - ANS ✓Basic Geometry from which models are built,
such as lines and circles.
Graphics Window - ANS ✓The active modelling area in which sketches,
constraints, features, or parts, and assemblies are created and edited
Horizontal - ANS ✓A constraint that causes the lines drawn to be parallel
to the x-axis.
Isometric Projection - ANS ✓Three dimensional drawing made up of
equal angles of 120 degrees, most common 3-D drawing used in industry.
Isometric View - ANS ✓Three dimensional drawing made up of equal
angles of 120 degrees, most common 3-D drawing used in industry.
(Similar to Above)
Autodesk Inventor Certification Test
, 2
Autodesk
Mirror - ANS ✓To flip a shape over a line of symmetry and double the
image.
Model - ANS ✓A visual, mathematical, or 3D representation in detail of an
object or design, often smaller than the original. A model is often used to
test ideas, make changes to a design and to learn more about what would
happen to a similar, real object.
Multiview Drawing - ANS ✓A graphical representation of a 3D object on
one plane using two or more views.
Oblique projection - ANS ✓Three dimensional drawing where one face is
seen squarely in true size and shape. The depth dimensions go back at
angles, usually 15, 30, or 45 degrees. Used when most information on
drawing is on the front of the object.
Offset - ANS ✓To make up for; to compensate for; to counteract. (The
amount by which something is out of line.)
Panning - ANS ✓Term used to describe lateral movement by pressing and
holding the mouse wheel.
Parallel - ANS ✓A constraint that causes 2 or more lines to be equal
distance from each other. OR Lines, planes or surfaces side by side and
having the same distance continuously between them.
Parametric Modelling - ANS ✓Feature based modelling based on
geometric definitions that can be changed at any time in the design process.
Autodesk Inventor Certification Test
