Course Exam Questions and
Answers
The estimated maximum net explosive weight of MDEH ___________. - Answer-Must
be included on the documentation certifying the explosive hazard
What is the procedure for designated authorized and qualified personnel to document
MPPEH as MDEH by visual inspection? - Answer-100% inspection by one individual
who determines the material is an explosive hazard
In order to document an item as MDAS through visual inspection, you must be able to: -
Answer-Inspect every surface
The following statement must be included on the disposal turn in document for
____________.
"This certifies that the material potentially presenting an explosive hazard listed has
been 100 percent properly inspected and to the best of my knowledge and belief
presents an explosive hazard." - Answer-Material documented as an explosive hazard
(MDEH)
Locations in which MPPEH is stored or processed must _________. - Answer-Have site
approval
The key to the safe management of MPPEH is ___________. - Answer-Documentation
The documentation of MPPEH as "an explosive hazard" requires ________. - Answer-A
single 100% visual inspection
Personnel who are qualified and authorized to inspect MPPEH and document its
explosives safety status as MDAS or MDEH, will be so designated in writing by the
______________. - Answer-Commanding Officer or Officer-in-Charge
Select the choice below that would be considered small arms ammunition. - Answer-.50
caliber without exploding projectile
The area in which MPPEH is processed or stored should be specified as a/an
__________. - Answer-Restricted area