[Company name]
NST2602
Assignment 3 2024
(213894) - DUE 16
July 2024
QUESTIONS WITH DETAILED ANSWERS
, NST2602 Assignment 3 2024 (213894) - DUE 16 July 2024
Question 1 (True or False)
1. Engineering graphics and design (EGD) impact only on technological
applications than academic applications.
2. Electrical technology (electrical system and control) is purposed to build
a formation in electrical, electronic, and digital principles.
3. The technological practice comprises cultural, organisational and
technical aspects.
4. The view that is value-neutral suggests it is unbiased in relation to values
and that its value depends on its application.
5. No one may design, manufacture, sell, or install an electric fence without
adhering to the health and safety standard stipulated in the Regulations.
6. Various items of electrical machinery motors, cables, and control
equipment are used collectively as a system hence the selection,
preparation, installation, and protection safety when they are used
separately.
7. Shear forces are sketched to measure the graphical magnitude of a
shared force at any point where the load is applied.
8. Construction work involves aspects of civil technology such as
earthworks, but it is not waterproof.
9. One point perspective defines the position of the eye and draws the view
of the picture plane and the model.
10. The art of representing 3D objects on a 2D surface to give the right
impression of the height, width, depth, and position in relation to each other
is referred to as projection. 1
1. The hand jack works based on the force that is produced by means of
presence when lifting heavy objects.
12. A hand drill is the only tool in which bevel gears of unequal size are
used. [24]
NST2602
Assignment 3 2024
(213894) - DUE 16
July 2024
QUESTIONS WITH DETAILED ANSWERS
, NST2602 Assignment 3 2024 (213894) - DUE 16 July 2024
Question 1 (True or False)
1. Engineering graphics and design (EGD) impact only on technological
applications than academic applications.
2. Electrical technology (electrical system and control) is purposed to build
a formation in electrical, electronic, and digital principles.
3. The technological practice comprises cultural, organisational and
technical aspects.
4. The view that is value-neutral suggests it is unbiased in relation to values
and that its value depends on its application.
5. No one may design, manufacture, sell, or install an electric fence without
adhering to the health and safety standard stipulated in the Regulations.
6. Various items of electrical machinery motors, cables, and control
equipment are used collectively as a system hence the selection,
preparation, installation, and protection safety when they are used
separately.
7. Shear forces are sketched to measure the graphical magnitude of a
shared force at any point where the load is applied.
8. Construction work involves aspects of civil technology such as
earthworks, but it is not waterproof.
9. One point perspective defines the position of the eye and draws the view
of the picture plane and the model.
10. The art of representing 3D objects on a 2D surface to give the right
impression of the height, width, depth, and position in relation to each other
is referred to as projection. 1
1. The hand jack works based on the force that is produced by means of
presence when lifting heavy objects.
12. A hand drill is the only tool in which bevel gears of unequal size are
used. [24]
