4/17/24, 9:19 PM Assessment 2
IOP2603-24-S1 Welcome to Ergonomics IOP2603! Assessment 2
QUIZ
Question 1
Not yet answered
Marked out of 1.00
As a rule of thumb, if natural light is used as the principal means of illumination at a
workspace, the window area needs to be equal to ___ percent of the floor area.
a. 40
b. 50
c. 20
d. 30
Clear my choice
Question 2
Not yet answered
Marked out of 1.00
Complaints relating to the feet and lower back are caused by one of the following
work postures:
a. Sitting without proper foot support
b. Sitting without back support
c. Standing
d. Cramped position
Clear my choice
Question 3
Not yet answered
Marked out of 1.00
Four commonly recognized computer workstation postures are:
a. Sitting, standing on both feet, standing with one foot resting, reclined
b. Standing, sitting tilted forward, sitting upright, sitting tilted back
c. Standing forward, laying down, sitting up, sitting on knees
d. Sitting with arms supported, standing with no arm support, seated with foot
support, seated with no foot support
Clear my choice
https://mymodules.dtls.unisa.ac.za/mod/quiz/attempt.php?attempt=17806194&cmid=844850 1/8
, 4/17/24, 9:19 PM Assessment 2
Question 4
Not yet answered
Marked out of 1.00
If the keyboard is too high, but not adjustable, what should you do to fix that?
a. Place pads underneath the wrists.
b. Do the best they can with it.
c. Move the keyboard to a lower place.
d. Move the keyboard to a higher location.
Clear my choice
Question 5
Not yet answered
Marked out of 1.00
Items that are used most frequently are referred to as ...
a. secondary Items
b. compulsory Items
c. preferred Items
d. primary Items
Clear my choice
Question 6
Not yet answered
Marked out of 1.00
Sit-standing is the second choice work posture for ... .
a. visual inspection and monitoring
b. light assembly with repetitive movements
c. extended horizontal reaching
d. fine manipulation and precision tasks
e. all of the options
Clear my choice
Question 7
Not yet answered
Marked out of 1.00
Sitting is the first choice work posture for
a. frequent moving around
b. extended horizontal reaching
c. fine manipulation and precision tasks
d. work below elbow height
https://mymodules.dtls.unisa.ac.za/mod/quiz/attempt.php?attempt=17806194&cmid=844850 2/8
IOP2603-24-S1 Welcome to Ergonomics IOP2603! Assessment 2
QUIZ
Question 1
Not yet answered
Marked out of 1.00
As a rule of thumb, if natural light is used as the principal means of illumination at a
workspace, the window area needs to be equal to ___ percent of the floor area.
a. 40
b. 50
c. 20
d. 30
Clear my choice
Question 2
Not yet answered
Marked out of 1.00
Complaints relating to the feet and lower back are caused by one of the following
work postures:
a. Sitting without proper foot support
b. Sitting without back support
c. Standing
d. Cramped position
Clear my choice
Question 3
Not yet answered
Marked out of 1.00
Four commonly recognized computer workstation postures are:
a. Sitting, standing on both feet, standing with one foot resting, reclined
b. Standing, sitting tilted forward, sitting upright, sitting tilted back
c. Standing forward, laying down, sitting up, sitting on knees
d. Sitting with arms supported, standing with no arm support, seated with foot
support, seated with no foot support
Clear my choice
https://mymodules.dtls.unisa.ac.za/mod/quiz/attempt.php?attempt=17806194&cmid=844850 1/8
, 4/17/24, 9:19 PM Assessment 2
Question 4
Not yet answered
Marked out of 1.00
If the keyboard is too high, but not adjustable, what should you do to fix that?
a. Place pads underneath the wrists.
b. Do the best they can with it.
c. Move the keyboard to a lower place.
d. Move the keyboard to a higher location.
Clear my choice
Question 5
Not yet answered
Marked out of 1.00
Items that are used most frequently are referred to as ...
a. secondary Items
b. compulsory Items
c. preferred Items
d. primary Items
Clear my choice
Question 6
Not yet answered
Marked out of 1.00
Sit-standing is the second choice work posture for ... .
a. visual inspection and monitoring
b. light assembly with repetitive movements
c. extended horizontal reaching
d. fine manipulation and precision tasks
e. all of the options
Clear my choice
Question 7
Not yet answered
Marked out of 1.00
Sitting is the first choice work posture for
a. frequent moving around
b. extended horizontal reaching
c. fine manipulation and precision tasks
d. work below elbow height
https://mymodules.dtls.unisa.ac.za/mod/quiz/attempt.php?attempt=17806194&cmid=844850 2/8
