OSHA 510
Horizontal standards apply when - Answer-a condition is not covered by a specific industry standard.
The maximum travel distance from any point of the protected area to the nearest fire extinguisher shall
not exceed - Answer-100 feet
When stopping a fall, a personal fall arrest system shall bring an employee to a complete stop and limit
the maximum deceleration distance to - Answer-3.5 feet
When mechanical equipment is being used perpendicular to the roof edge, the warning lines cannot be
closer than - Answer-10 feet
OSHA requires that scaffolding being erected, moved, dismantled or altered be supervised by - Answer-
competent person
According to 1926.502(b)(1), the top rail of a guardrail system must be a height of ____ inches +/- 3
inches above the walking/ working level - Answer-42
A material chute used during demolition operations must be enclosed when its angle is equal to or
greater than ______ degrees from the horizontal - Answer-45
On temporary stairs, handrails (to provide adequate handholds for employees grasping to prevent
falling) shall have a minimum clearance of _____ inches between the handrail and the walls - Answer-3
Horizontal standards apply when - Answer-a condition is not covered by a specific industry standard.
The maximum travel distance from any point of the protected area to the nearest fire extinguisher shall
not exceed - Answer-100 feet
When stopping a fall, a personal fall arrest system shall bring an employee to a complete stop and limit
the maximum deceleration distance to - Answer-3.5 feet
When mechanical equipment is being used perpendicular to the roof edge, the warning lines cannot be
closer than - Answer-10 feet
OSHA requires that scaffolding being erected, moved, dismantled or altered be supervised by - Answer-
competent person
According to 1926.502(b)(1), the top rail of a guardrail system must be a height of ____ inches +/- 3
inches above the walking/ working level - Answer-42
A material chute used during demolition operations must be enclosed when its angle is equal to or
greater than ______ degrees from the horizontal - Answer-45
On temporary stairs, handrails (to provide adequate handholds for employees grasping to prevent
falling) shall have a minimum clearance of _____ inches between the handrail and the walls - Answer-3
