2026- TX STATE INSPECTOR REVIEW
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
TX STATE INSPECTOR REVIEW - VI
Safety Inspections Study Material (VI-80)
The Five-step sequence: Road test, inside the vehicle, outside the vehicle, underneath the
vehicle, under the hood.
To ensure an inspection is properly and timely performed, what order should it be completed in?
Financial responsibility
Before proceeding with any inspection, you should first verify what?
Insured's name, policy number, vehicle make, model and vin, effective date, expiration date.
When verifying financial responsibility, what should you check for?
Minimum liability.
When verifying financial responsibility, what insurance policy requirements should the vehicle
meet?
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
,2026- TX STATE INSPECTOR REVIEW
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
A. Refuse to inspect the vehicle.
If the insured cannot provide proof of insurance, what should you do?
A. Refuse to inspect the vehicle.
B. Inspect it under the promise that the insured will come back with proof of insurance.
C. Inspect the vehicle regardless, as insurance is not required for inspection.
Compressed Natural Gas
What does CNG stand for?
Inspect any present CNG tanks, making sure the customer is present IF the tank is in the
vehicle's trunk.
Regarding CNG tanks, what should the inspector do on verifying vehicle insurance?
C. Both A and B.
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
,2026- TX STATE INSPECTOR REVIEW
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
A CNG equipped vehicle MUST:
A. Comply with the requirements of 49 CFR 571.304
B. Have a fuel container tank that has NOT exceeded the expiration date.
C. Both A and B.
Through both observation and/or documentation.
How can an inspector complete the CNG inspection requirement?
Service brakes
In the road test, what should be inspected?
20 MPH
What speed should the inspector apply service brakes to determine if a vehicle comes to a
smooth stop within the respective required distance?
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
, 2026- TX STATE INSPECTOR REVIEW
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
A. By applying firmly at a speed of 20mph.
How should the inspector apply the brakes when servicing breaks?
A. By applying firmly at a speed of 20mph.
B. By gently tapping the brakes repeatedly at a speed of 10mph.
C. By pumping brakes to the floor repeatedly at a speed of 35mph.
At a specifically designated and approved brake test area.
When servicing brakes, where should the test be performed?
25ft.
What is the required stopping distance for a sedan to come to smooth stop when serving
brakes?
30ft.
What is the required stopping distance for trucks and motorcycles to come to smooth stop when
serving brakes?
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
TX STATE INSPECTOR REVIEW - VI
Safety Inspections Study Material (VI-80)
The Five-step sequence: Road test, inside the vehicle, outside the vehicle, underneath the
vehicle, under the hood.
To ensure an inspection is properly and timely performed, what order should it be completed in?
Financial responsibility
Before proceeding with any inspection, you should first verify what?
Insured's name, policy number, vehicle make, model and vin, effective date, expiration date.
When verifying financial responsibility, what should you check for?
Minimum liability.
When verifying financial responsibility, what insurance policy requirements should the vehicle
meet?
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
,2026- TX STATE INSPECTOR REVIEW
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
A. Refuse to inspect the vehicle.
If the insured cannot provide proof of insurance, what should you do?
A. Refuse to inspect the vehicle.
B. Inspect it under the promise that the insured will come back with proof of insurance.
C. Inspect the vehicle regardless, as insurance is not required for inspection.
Compressed Natural Gas
What does CNG stand for?
Inspect any present CNG tanks, making sure the customer is present IF the tank is in the
vehicle's trunk.
Regarding CNG tanks, what should the inspector do on verifying vehicle insurance?
C. Both A and B.
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
,2026- TX STATE INSPECTOR REVIEW
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
A CNG equipped vehicle MUST:
A. Comply with the requirements of 49 CFR 571.304
B. Have a fuel container tank that has NOT exceeded the expiration date.
C. Both A and B.
Through both observation and/or documentation.
How can an inspector complete the CNG inspection requirement?
Service brakes
In the road test, what should be inspected?
20 MPH
What speed should the inspector apply service brakes to determine if a vehicle comes to a
smooth stop within the respective required distance?
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
, 2026- TX STATE INSPECTOR REVIEW
TX STATE
TX STATE
- VIINSPECTOR
Safety
INSPECTOR
Inspections
REVIEW
REVIEW
Study
- VI Material
Safety
- VI Safety
Inspections
(VI-80).pdf
Inspections
StudyStudy
Material
Material
(VI-80).pdfExam
(VI-80) Questions and Answers Grade A
A. By applying firmly at a speed of 20mph.
How should the inspector apply the brakes when servicing breaks?
A. By applying firmly at a speed of 20mph.
B. By gently tapping the brakes repeatedly at a speed of 10mph.
C. By pumping brakes to the floor repeatedly at a speed of 35mph.
At a specifically designated and approved brake test area.
When servicing brakes, where should the test be performed?
25ft.
What is the required stopping distance for a sedan to come to smooth stop when serving
brakes?
30ft.
What is the required stopping distance for trucks and motorcycles to come to smooth stop when
serving brakes?
TX STATE INSPECTOR REVIEW
TX- STATE
TX
VI Safety
STATE
INSPECTOR
Inspections
INSPECTOR REVIEW
Study
REVIEW
Material
- VI-Safety
VI(VI-80)
Safety
Inspections
Inspections
Study
Study
Material
Material
(VI-80).pdfExam
(VI-80).pdf Questions and Answers Grade A
