INIWIC - TEST 3 NEWEST ACTUAL WITH COMPLETE
QUESTIONS AND CORRECT ANSWERS/ VERIFIED/GRADED A+/
When arming the FN303, turn the 1/4 turn air valve and listen
for this noise?
Click
When engaging targets with the FN303, the head and neck
should always be avoided unless this has been authorized?
Deadly force
What's immediate action for the FN303?
Tap the base of the magazine, shake the magazine from side to
side, assess the situation, and re-engage the target. If this
fails, swap magazines.
How do you load the FN303 with a speed loader?
1. Attach the speed loader to the empty magazine until it snaps
into position
2. Unscrew the cover to the transport tube
3. With the transparent cover facing down, screw tube into the
speed loader
Page 1 of 21
,4. Invert the magazine assembly
5. Turn rotor counterclockwise using rotor finger grooves until
all pockets are filled
6. Separate the magazine from the speed loader
What shouldn't be used to clean the FN303?
Gun solvents or wire brushes
What cleaning tools are authorized for the FN303?
The 12 gauge nylon brush, nylon utility brush, oil for pneumatic
systems, and isopropyl alcohol.
When does the FN303 require lubrication?
After 500 shots use 4-6 drops of pneumatic oil
What's the range of the FN303 on an area and point target?
30-50 (Point) and 50-100 (Area)
What's the caliber of the FN303?
0.68
Page 2 of 21
, What's the rifling on the FN303?
Smooth bore
Does the FN303 fire from the open or closed bolt?
Open bolt, this is why you shouldn't put your fingers in the
magazine well
What's the magazine capacity of the FN303?
15 rounds
What are the FN303's types of projectiles?
Clear impact, washable paint, permanent paint, pava powder
(0.10% OC), and inert powder
What's the shot capacity of the FN303 on a full bottle?
110 shots average
Depending on the payload selected, the FN303 is capable of
what?
Page 3 of 21
QUESTIONS AND CORRECT ANSWERS/ VERIFIED/GRADED A+/
When arming the FN303, turn the 1/4 turn air valve and listen
for this noise?
Click
When engaging targets with the FN303, the head and neck
should always be avoided unless this has been authorized?
Deadly force
What's immediate action for the FN303?
Tap the base of the magazine, shake the magazine from side to
side, assess the situation, and re-engage the target. If this
fails, swap magazines.
How do you load the FN303 with a speed loader?
1. Attach the speed loader to the empty magazine until it snaps
into position
2. Unscrew the cover to the transport tube
3. With the transparent cover facing down, screw tube into the
speed loader
Page 1 of 21
,4. Invert the magazine assembly
5. Turn rotor counterclockwise using rotor finger grooves until
all pockets are filled
6. Separate the magazine from the speed loader
What shouldn't be used to clean the FN303?
Gun solvents or wire brushes
What cleaning tools are authorized for the FN303?
The 12 gauge nylon brush, nylon utility brush, oil for pneumatic
systems, and isopropyl alcohol.
When does the FN303 require lubrication?
After 500 shots use 4-6 drops of pneumatic oil
What's the range of the FN303 on an area and point target?
30-50 (Point) and 50-100 (Area)
What's the caliber of the FN303?
0.68
Page 2 of 21
, What's the rifling on the FN303?
Smooth bore
Does the FN303 fire from the open or closed bolt?
Open bolt, this is why you shouldn't put your fingers in the
magazine well
What's the magazine capacity of the FN303?
15 rounds
What are the FN303's types of projectiles?
Clear impact, washable paint, permanent paint, pava powder
(0.10% OC), and inert powder
What's the shot capacity of the FN303 on a full bottle?
110 shots average
Depending on the payload selected, the FN303 is capable of
what?
Page 3 of 21
