Elevator mechanic exam - Study guides, Class notes & Summaries

ELEVATOR MECHANIC EXAM | 2025 COMPLETE MECHANIC EXAM WITH CORRECT VERIFIED ANSWERS | ALREADY GRADED A+ | BRAND NEW How would you connect an ohm-meter to check load resistance? - Correct Answer > Black to common Red to V ohm Switch at Ohm. No power, take one lead off, connect in parallel Analog needs to be Zeroed 1 st What must be installed on a false car before operation? - Correct Answer > Spring Loaded Safeties. There is slight arcing between the brush ...

This study resource presents a selection of expected questions with correct, verified answers for the Elevator Mechanic certification exam for the 2025/2026 period. It covers all core areas of the exam including elevator operations, electrical and mechanical systems, safety procedures, diagnostics, and code compliance. A valuable tool for anticipating exam content and improving test readiness.

This exam review guide offers a curated collection of verified questions and accurate answers for the Elevator Mechanic certification exam, updated for the 2025/2026 cycle. It covers major exam topics including elevator systems, mechanical and electrical components, safety standards, diagnostics, and regulatory compliance. Designed for focused preparation and high exam performance

A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - ANSWER Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - ANSWER Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue? - ANSWER Suicid...

Know the formula for RPM correct answer: RPM = 60 ∙ ƒ ÷ P÷2 = Step 1. 60 x Frequency (Hz.) = Step 2. Poles ÷ 2 = Take answer 1 and ÷ by answer 2 = You are using a Temp Run Box and you get shocked! Why! 520 Pg. 4 correct answer: Bad Ground Scaffolding, You have 32' of rise, you are using 3x5 scaffolding. Where will the tie off points be ? 140 PG. 287-288 correct answer: Scaffolding should be tied to the structure using #9 wire or tie-in devices. The first vertical tie ...

Elevator Mechanic Exam Prep Questions with 100% Correct Answers | Verified | Latest Update

ELEVATOR MECHANIC EXAM 2024/2025 WITH ACCURATE SOLUTIONS

Elevator Mechanic Exam 2024 update exam with correct answers How many times there maximum intended load? 137 Pg 18 4' ft. - ANSWER-When installing travelling cables what is the minimum length of vertical suspension at both ends before the loop forms?

ELEVATOR MECHANIC EXAM QUESTIONS WITH 100% CORRECT ANSWERS....

ELEVATOR MECHANIC EXAM REVIEW QUESTIONS AND 100% CORRECT ANSWERS 2025/2026 A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - Answer - Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - Answer -Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but ...