Elevator mechanic - Study guides, Class notes & Summaries

Elevator Mechanic Exam Review Elevator Mechanic Study Questions with COMPLETE SOLUTIONS (LATEST) If rigging gear is roped 3:1 and a BEAM CLAMP is used to lift a 6,000lb load. What is the beam capacity? - CORRECT ANSWER 18,000lbs. Beam capacity is cut in half with use of clamp, when rigging all blocks, rope, and clamps will be Equal to the lowest load rating What are the consequences of misaligned joints on a Rack and Pinion? - CORRECT ANSWER Broken Gear teeth. CWT derailment. Excess...

ELEVATOR MECHANIC EXAM PREP QUESTIONS AND VERIFIED ANSWERS....

Elevator Mechanic Exam Review Elevator Mechanic Study Questions with COMPLETE SOLUTIONS (LATEST) If rigging gear is roped 3:1 and a BEAM CLAMP is used to lift a 6,000lb load. What is the beam capacity? - CORRECT ANSWER 18,000lbs. Beam capacity is cut in half with use of clamp, when rigging all blocks, rope, and clamps will be Equal to the lowest load rating What are the consequences of misaligned joints on a Rack and Pinion? - CORRECT ANSWER Broken Gear teeth. CWT derailment. Excess...

ELEVATOR MECHANIC EXAM 2024/2025 WITH ACCURATE SOLUTIONS

Elevator Mechanic Exam 2024 update exam with correct answers How many times there maximum intended load? 137 Pg 18 4' ft. - ANSWER-When installing travelling cables what is the minimum length of vertical suspension at both ends before the loop forms?

Elevator Mechanic Exam Review 2025 update with correct answers When replacing a PCB in a controller what precautions must be taken? - ANSWER-Use a grounding wrist strap, and never remove anything with the power on Where is weight added on a freight door for balancing? - ANSWER-On the top. 1 gallon equals how many cubic feet? - ANSWER-.134 cubic feet 2 controllers in a small machine room face each other, what is the minimum clearance between them? - ANSWER-36 inches

A contractor wants to raise the car speed from 100fpm to 125fpm, it currently has a 12" sheave. What sheave is required? - ANSWER Diam=12" 12/4=3" 25fpm=3" 100fpm + 25fpm= 12"+3"= 15" sheave A MOV (Metal Oxide Varistor) burns out. You replace it, but cannot read voltage or resistance. What should you do? - ANSWER Replace it with a larger MOV On a Ward-Leonard circuit the break is set, but the motor is trying to slip through the break. What is the issue? - ANSWER Suicid...

ELEVATOR MECHANIC EXAM | 2025 COMPLETE MECHANIC EXAM WITH CORRECT VERIFIED ANSWERS | ALREADY GRADED A+ | BRAND NEW How would you connect an ohm-meter to check load resistance? - Correct Answer > Black to common Red to V ohm Switch at Ohm. No power, take one lead off, connect in parallel Analog needs to be Zeroed 1 st What must be installed on a false car before operation? - Correct Answer > Spring Loaded Safeties. There is slight arcing between the brush ...

Elevator Mechanic Exam Prep 2024 update with questions and correct answers Who can you demand a MSDS sheet from to check chemicals in a cleaning product. 110 PG 13 - ANSWER-Your elevator Company Superintendent/Manager 12 Floor Building with three cars, 3 floors will not get PI's. How many PI's in total do you need to order for this job? - ANSWER-12 Floors x 3 Elevators= 36 PI's - (3 from 3 floors)9 =27 a 75 Ohm resistor has blow and you don't have a replacement, What can you use? - ANSWE...

Elevator Mechanic Exam Prep Questions with Complete Solutions