NATE Study guides, Class notes & Summaries

NATE Gas Heating Exam Questions with Correct Answers Since 1992, the United States Department of Energy has required that all furnaces sold and installed from that date on must have an AFUE of no less than: A: 70% B: 75% C: 78% D: 80% -AnsC: 78% Many pre-1992 furnaces have efficiencies around _______. A: 10% B: 40% C: 60% D: 80% -AnsC: 60% Today, furnaces with AFUE ratings greater than _____ are available. A: 85% B: 90% C: 100% D: 110% -AnsB: 90% A thermocouple is used with: A:...

A system is supplied from the factory with charge of 5 pounds 10 ounces for a 15 foot line set. The line set is 25 feet long. The manufacturer's instruction sheet specifies 0.6 ounces of refrigeration to be added for each added foot of refrigerant line set length. What is the total refrigerant charge for the system? A. 6 ounces B. 5 pounds C. 5 pounds 10 ounces D. 6 pounds - D. 6 pounds 15ft - 25ft = 10ft x .6 = 6 ounces 5 pounds + 10 ounces + 6 ounces 5 pounds + 16 ounces = 6 poun...

Charging a heat pump with refrigerant is best accomplished in the _______ mode. A: Heating mode B: Cooling mode C: Defrost mode D: Emergency heating mode CORRECT ANSWER B: Cooling mode Heat pumps can provide both heating in the winter and cooling in the summer. In which mode is the heat pump more efficient? A: Heating mode B: Cooling mode C: Defrost mode D: Emergency heating mode CORRECT ANSWER A: Heating mode Which of the following components is exclusive t...

NATE CORE-Exam 2023 Questions and Answers When explaining to a customer that you have topped off the system charge, which of the following terms is most appropriate? - ANSWER-Refrigerant

On an R-22 system, line diameters and lengths are typically specified for a vapor pressure drop that does not exceed what? CORRECT ANSWER 6-7PSI or 6F What is the primary purpose of using flux when soldering copper or brass parts? CORRECT ANSWER Prevent Oxidation The water that results from a defrost cycle of an air to air heat pump(runoff) must? CORRECT ANSWER Drain off and away from the outdoor coil. Why must the runoff be drained off and away from the outdoor coil? CORRECT ANSWER Exc...

Since 1992, the United States Department of Energy has required that all furnaces sold and installed from that date on must have an AFUE of no less than: A: 70% B: 75% C: 78% D: 80% CORRECT ANSWER C: 78% Many pre-1992 furnaces have efficiencies around _______. A: 10% B: 40% C: 60% D: 80% CORRECT ANSWER C: 60% Today, furnaces with AFUE ratings greater than _____ are available. A: 85% B: 90% C: 100%

NATE AC Service Certification Exam With 100% Correct Answers 2023

NATE Heat Pump Exam (Latest 2022 – 2023)

HVAC NATE Heat Pump EXAM Questions and Answers (2023/2024) (Verified Answers)q1

On an R-22 system, line diameters and lengths are typically specified for a vapor pressure drop that does not exceed what? - ANSWER6-7PSI or 6F What is the primary purpose of using flux when soldering copper or brass parts? - ANSWERPrevent Oxidation The water that results from a defrost cycle of an air to air heat pump(runoff) must? - ANSWERDrain off and away from the outdoor coil. Why must the runoff be drained off and away from the outdoor coil? - ANSWERExcessive ice can build up on t...

NATE CORE STUDY GUIDE(correct answers)to passWhich of the following is not the product of incomplete combustion: Oxides of nitrogen An oil trap is required at the base of the discharge line of the vertical riser is _____ or above 8 feet A diode allows current to flow in one direction: True 1 Watt = _____ Btu 3.41 Current in a closed circuit is limited by which of the following: resistance An oil separator is located in the _____: Discharge line ___...