NEIEP 800 Final Exam (Latest 2025/ 2026
Update) Questions and Verified Answers
100% Correct {Grade A}
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50 square
inches. What is the system pressure? - correct answer 162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct wellway-to-wellway
distance? - correct answer 134' 11"
Electrolysis is caused by which of the following? - correct answer Stray current
corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must be how many times the
diameter of the suspension ropes? - correct answer 30
Wye-Delta starting is used for which of the following? - correct answer Reduced
current starting
You need the area of the plunger to calculate the pressure of the hydraulic system.
Your plunger is 8 inches in diameter. What is it's area? - correct answer 50.27 square
inches
Which of the following provides mechanical interlocking of contactors? - correct
answer Interlock contacts
, NEIEP 800 Final Exam (Latest 2025/ 2026
Update) Questions and Verified Answers
100% Correct {Grade A}
As the certified welder on the job you must weld two cylinder pieces. How must you
join the two pieces? - correct answer Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to prevent
damage to the packing? - correct answer Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound? - correct answer
When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance from the
first floor finished floor height and the second floor finished floor height? - correct
answer 13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct measurement
to align the truss in the center of the wellway? - correct answer 7' 6 1/2"
What is the function of the lower newel wheel on a moving walk with solid
balustrades? - correct answer It acts as an idler
Which of the following will determine the leveling speed of an elevator? - correct
answer Rate of flow in gpm
Update) Questions and Verified Answers
100% Correct {Grade A}
The total weight of your elevator (force) is 8100 lbs. and its plunger area is 50 square
inches. What is the system pressure? - correct answer 162 psi
Refer to the NEIEP Moving Walk Final Layout. What is the correct wellway-to-wellway
distance? - correct answer 134' 11"
Electrolysis is caused by which of the following? - correct answer Stray current
corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must be how many times the
diameter of the suspension ropes? - correct answer 30
Wye-Delta starting is used for which of the following? - correct answer Reduced
current starting
You need the area of the plunger to calculate the pressure of the hydraulic system.
Your plunger is 8 inches in diameter. What is it's area? - correct answer 50.27 square
inches
Which of the following provides mechanical interlocking of contactors? - correct
answer Interlock contacts
, NEIEP 800 Final Exam (Latest 2025/ 2026
Update) Questions and Verified Answers
100% Correct {Grade A}
As the certified welder on the job you must weld two cylinder pieces. How must you
join the two pieces? - correct answer Tack welds then a fill bead
Once a plunger joint has been completed, what steps should be followed to prevent
damage to the packing? - correct answer Sand with emery cloth
Under which of the following conditions will the buzzer (BZT) sound? - correct answer
When the handrail speed is 15% below step speed.
Refer to the NEIEP Escalator Final Layout diagram. What is the total distance from the
first floor finished floor height and the second floor finished floor height? - correct
answer 13' 6"
Refer to the NEIEP Escalator Final Layout diagram. What is the correct measurement
to align the truss in the center of the wellway? - correct answer 7' 6 1/2"
What is the function of the lower newel wheel on a moving walk with solid
balustrades? - correct answer It acts as an idler
Which of the following will determine the leveling speed of an elevator? - correct
answer Rate of flow in gpm
