MKC SWE Study 2025 NEWEST EXAM
COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ BRAND NEW!!
Within how many days of an inspection are you required to submit the
new boat inspection report - ,,,,answer,,,..10
List the six basic safety procedures to follow when troubleshooting or
repairing electrical components - ,,,,answer,,,..1. Never operate, repair,
adjust, tamper with equipment unless assigned to do so.
2. obey all posted operating and safety precautions
3. de-energize equipment prior to repair.
4. always wear approved PPE.
5. use insulated tools and non-metalic flashlight.
6. tighten the connections of fremovable tes leads on portable meters.
generally the crown end of the piston is slightly smaller in diameter than
the skirt for what reason - ,,,,answer,,,..to allow for expansion and proper
fit
piston ring gaps should be staggered at _ degrees to reduce gas leakage -
,,,,answer,,,..180*
what could happen if you ignore the specific safety warning in the engine
service manual - ,,,,answer,,,..injure yourself/people on or around the
boat/damage outboard engine
,electronic components such as transistors, resistors, and micro
processors are mounted on - ,,,,answer,,,..printed circuit boards
when updating local maintenance tasks which menu should you select to
add items or make edits for items in the list parts field -
,,,,answer,,,..options
if the local maintenance procedures are updated it is mandatory that
these changes are also applied to the - ,,,,answer,,,..master tasks
when creating a maintenance schedule, the first thing you should choose
from the maintenance menu is - ,,,,answer,,,..schedules
adding or editing detailed information on an update of a local
maintenance procedure includes - ,,,,answer,,,..consumables
the unit operation schedule is used to - ,,,,answer,,,..provide an overview
of the units operating schedule
after you have opened the maintenance schedule when assigning a local
maintenance task to the maintenance schedule you will need to ensure
that you are in the - ,,,,answer,,,..update mode
initializing the master task will activate the maintenance task which will
be put in the maintenance scheduler and will also - ,,,,answer,,,..link the
master task to the maintenance procedure
when creating a local maintenance procedure in CMPlus ___ field
identifies the frequency of the task - ,,,,answer,,,..periodicity
you are determine the bromine residuals in potable water using the DPT
test. what are the tests low and high ranges of bromine - ,,,,answer,,,..low
is 0.2-22.2 PPM
,high is 4.4-22.2 PPM
which component of the pneumatic system is designed to change air
pressure without changing air compressors - ,,,,answer,,,..pressure
reducing station
what is used to increase seawater pressure from 700 to 1000 PSI to
provide the driving force for the R/O process - ,,,,answer,,,..high pressure
pump
if seawater cannot be supplied from the ship with enough pressure to
overcome flow resistance through components of the filter system and
still meet suction pressure requirements of the HP pump, what
component is installed - ,,,,answer,,,..feed booster pump
what material is added to the exhaust valve heads, tips and stems to
improve wearing qualities - ,,,,answer,,,..stellite
how do you dress slight scoring on a crankshaft bearing -
,,,,answer,,,..oilstone
What form is CG 4094 - ,,,,answer,,,..SSMR
bearings should not be stored in temperatures that exceed -
,,,,answer,,,..120*F
when removing rolling-element bearings you should observe which of the
following safety precautions - ,,,,answer,,,..unless absolutely necessary
never start a piece of machinery if the bearings are known to be in poor
condition
which component of the pneumatic system removes moisture that has
not been removed at the receiver - ,,,,answer,,,..moisture separator
, which part of the automatic proportioning brominator contains the
bromine cartridge - ,,,,answer,,,..feeder assembly
when should the engineer department routinely preform residual testing
to ensure water treatment effectiveness - ,,,,answer,,,..whenever the
cartridges are changed
the low range for chlorine when you are testing potable water with DPD kit
is - ,,,,answer,,,..0.1 to 1.0 PPM
when handling bromine you should - ,,,,answer,,,..not breath any vapor or
mist
the engineering department will need to maintain a chronological record
of potable water monitoring for how many years - ,,,,answer,,,..2 years
what should you determine before taking on shore water -
,,,,answer,,,..the FAC content and the hydrogen ion concentration(PH)
what CFR regulation states that no person shall discharge oil of any sort
into any body of water, including sludge from bilges, fuel tanks, waste oil
and oily rags - ,,,,answer,,,..46 CFR 162.050
what form is CG-5682 - ,,,,answer,,,..Engineering change request(ECR)
what should you use if OEM parts are not available - ,,,,answer,,,..parts
with characteristics matching the parts to be replaced
what is the purpose of the drilled passages in the crankshaft -
,,,,answer,,,..hermaphrodite calipers
cranking pressure for system relief valves - ,,,,answer,,,..1050 PSI
COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ BRAND NEW!!
Within how many days of an inspection are you required to submit the
new boat inspection report - ,,,,answer,,,..10
List the six basic safety procedures to follow when troubleshooting or
repairing electrical components - ,,,,answer,,,..1. Never operate, repair,
adjust, tamper with equipment unless assigned to do so.
2. obey all posted operating and safety precautions
3. de-energize equipment prior to repair.
4. always wear approved PPE.
5. use insulated tools and non-metalic flashlight.
6. tighten the connections of fremovable tes leads on portable meters.
generally the crown end of the piston is slightly smaller in diameter than
the skirt for what reason - ,,,,answer,,,..to allow for expansion and proper
fit
piston ring gaps should be staggered at _ degrees to reduce gas leakage -
,,,,answer,,,..180*
what could happen if you ignore the specific safety warning in the engine
service manual - ,,,,answer,,,..injure yourself/people on or around the
boat/damage outboard engine
,electronic components such as transistors, resistors, and micro
processors are mounted on - ,,,,answer,,,..printed circuit boards
when updating local maintenance tasks which menu should you select to
add items or make edits for items in the list parts field -
,,,,answer,,,..options
if the local maintenance procedures are updated it is mandatory that
these changes are also applied to the - ,,,,answer,,,..master tasks
when creating a maintenance schedule, the first thing you should choose
from the maintenance menu is - ,,,,answer,,,..schedules
adding or editing detailed information on an update of a local
maintenance procedure includes - ,,,,answer,,,..consumables
the unit operation schedule is used to - ,,,,answer,,,..provide an overview
of the units operating schedule
after you have opened the maintenance schedule when assigning a local
maintenance task to the maintenance schedule you will need to ensure
that you are in the - ,,,,answer,,,..update mode
initializing the master task will activate the maintenance task which will
be put in the maintenance scheduler and will also - ,,,,answer,,,..link the
master task to the maintenance procedure
when creating a local maintenance procedure in CMPlus ___ field
identifies the frequency of the task - ,,,,answer,,,..periodicity
you are determine the bromine residuals in potable water using the DPT
test. what are the tests low and high ranges of bromine - ,,,,answer,,,..low
is 0.2-22.2 PPM
,high is 4.4-22.2 PPM
which component of the pneumatic system is designed to change air
pressure without changing air compressors - ,,,,answer,,,..pressure
reducing station
what is used to increase seawater pressure from 700 to 1000 PSI to
provide the driving force for the R/O process - ,,,,answer,,,..high pressure
pump
if seawater cannot be supplied from the ship with enough pressure to
overcome flow resistance through components of the filter system and
still meet suction pressure requirements of the HP pump, what
component is installed - ,,,,answer,,,..feed booster pump
what material is added to the exhaust valve heads, tips and stems to
improve wearing qualities - ,,,,answer,,,..stellite
how do you dress slight scoring on a crankshaft bearing -
,,,,answer,,,..oilstone
What form is CG 4094 - ,,,,answer,,,..SSMR
bearings should not be stored in temperatures that exceed -
,,,,answer,,,..120*F
when removing rolling-element bearings you should observe which of the
following safety precautions - ,,,,answer,,,..unless absolutely necessary
never start a piece of machinery if the bearings are known to be in poor
condition
which component of the pneumatic system removes moisture that has
not been removed at the receiver - ,,,,answer,,,..moisture separator
, which part of the automatic proportioning brominator contains the
bromine cartridge - ,,,,answer,,,..feeder assembly
when should the engineer department routinely preform residual testing
to ensure water treatment effectiveness - ,,,,answer,,,..whenever the
cartridges are changed
the low range for chlorine when you are testing potable water with DPD kit
is - ,,,,answer,,,..0.1 to 1.0 PPM
when handling bromine you should - ,,,,answer,,,..not breath any vapor or
mist
the engineering department will need to maintain a chronological record
of potable water monitoring for how many years - ,,,,answer,,,..2 years
what should you determine before taking on shore water -
,,,,answer,,,..the FAC content and the hydrogen ion concentration(PH)
what CFR regulation states that no person shall discharge oil of any sort
into any body of water, including sludge from bilges, fuel tanks, waste oil
and oily rags - ,,,,answer,,,..46 CFR 162.050
what form is CG-5682 - ,,,,answer,,,..Engineering change request(ECR)
what should you use if OEM parts are not available - ,,,,answer,,,..parts
with characteristics matching the parts to be replaced
what is the purpose of the drilled passages in the crankshaft -
,,,,answer,,,..hermaphrodite calipers
cranking pressure for system relief valves - ,,,,answer,,,..1050 PSI
