North Carolina Roofing Practice Exam 1 with all Correct
& 100% Verified Answers |Actual Complete Exam|
Already Graded A+
According to NRCA, architectural metal panel roof systems perform well on slopes of ____ in 12 or
greater.
A. 1/4
B. 3
C. 1/2
D. 1/8 ✔Correct Answers--B. 3
A roof measures 60 feet by 30 feet eave to eave. The height of the gable is 5 feet. ____ squares of
shingles will be purchased.
A. 16
B. 17
C. 18
D. 19 ✔Correct Answers--D. 19
The holder of a limited license shall be entitled to act as a general contractor for any single project
with a value of up to _____.
A. $1,000,000
B. $500,000
C. $250,000
D. $200,000 ✔Correct Answers--B. $500,000
Eave to eave measurement is 40 feet. The gable is 8 feet high. The rise and run is ____.
A. 3
B. 4
C. 5
D. 8 ✔Correct Answers--C. 5
What is the quick ratio (or acid test ratio) for a company that has current assets of $28,000, inventory
of $4,000, and current liabilities of $6,000?
A. 4/1
B. 1/4
C. 7/1
D. 1/7 ✔Correct Answers--A. 4/1
Fasteners for concrete or clay roof tiles shall penetrate the deck a minimum of ____ inch or through
the thickness of the deck whichever is less.
A. 1/2
B. 5/8
C. 3/4
D. 1 ✔Correct Answers--C. 3/4
A minimum of ____ inches of clearance is recommended between walls and curbs.
A. 12
B. 16
, C. 18
D. 24 ✔Correct Answers--D. 24
Cementitious wood-fiber roof decks require vertical alignment to provide a uniform substrate for a
roof system. Elevation differences in excess of ____ inches between planets are considered
unacceptable.
A. 1/8
B. 1/4
C. 1/3
D. 1/2 ✔Correct Answers--A. 1/8
Why would a redcoat be needed for an SPF system?
A. Thin coat becoming slightly translucent
B. Extensive physical damage
C. Damage caused by hail, wind, or hurricane
D. All of the above ✔Correct Answers--D. All of the above
When evaluating the moisture content of existing roof assemblies, non destructive moisture
evaluation techniques like _____ should NOT be used.
A. Electrical capacitance
B. Infrared thermography
C. Pin-type moisture meter
D. Neutron thermalization ✔Correct Answers--C. Pin-type moisture meter
Cold-applied bitumens should be applied at a rate of ____ gallons per square.
A. 1
B. 2
C. 3
D. 4 ✔Correct Answers--C. 3
Any person, firm corporation, or agent who violates a provision of this code or the technical codes
shall be guilty of a _____ misdemeanor.
A. Class 1
B. Class 2
C. Class 3
D. None of the above ✔Correct Answers--C. Class 3
Slate shingles shall be installed only on roof decks having a slope of ____ or greater.
A. 2:12
B. 2 1/2:12
C. 3:12
D. 4:12 ✔Correct Answers--D. 4:12
Fastening of full-length three tab strip shingles requires a minimum of ____ roofing nails per strip
shingle.
A. 4
B. 6
C. 8
D. 32 ✔Correct Answers--A. 4
The _____ method recognizes income when the employer has received it.
& 100% Verified Answers |Actual Complete Exam|
Already Graded A+
According to NRCA, architectural metal panel roof systems perform well on slopes of ____ in 12 or
greater.
A. 1/4
B. 3
C. 1/2
D. 1/8 ✔Correct Answers--B. 3
A roof measures 60 feet by 30 feet eave to eave. The height of the gable is 5 feet. ____ squares of
shingles will be purchased.
A. 16
B. 17
C. 18
D. 19 ✔Correct Answers--D. 19
The holder of a limited license shall be entitled to act as a general contractor for any single project
with a value of up to _____.
A. $1,000,000
B. $500,000
C. $250,000
D. $200,000 ✔Correct Answers--B. $500,000
Eave to eave measurement is 40 feet. The gable is 8 feet high. The rise and run is ____.
A. 3
B. 4
C. 5
D. 8 ✔Correct Answers--C. 5
What is the quick ratio (or acid test ratio) for a company that has current assets of $28,000, inventory
of $4,000, and current liabilities of $6,000?
A. 4/1
B. 1/4
C. 7/1
D. 1/7 ✔Correct Answers--A. 4/1
Fasteners for concrete or clay roof tiles shall penetrate the deck a minimum of ____ inch or through
the thickness of the deck whichever is less.
A. 1/2
B. 5/8
C. 3/4
D. 1 ✔Correct Answers--C. 3/4
A minimum of ____ inches of clearance is recommended between walls and curbs.
A. 12
B. 16
, C. 18
D. 24 ✔Correct Answers--D. 24
Cementitious wood-fiber roof decks require vertical alignment to provide a uniform substrate for a
roof system. Elevation differences in excess of ____ inches between planets are considered
unacceptable.
A. 1/8
B. 1/4
C. 1/3
D. 1/2 ✔Correct Answers--A. 1/8
Why would a redcoat be needed for an SPF system?
A. Thin coat becoming slightly translucent
B. Extensive physical damage
C. Damage caused by hail, wind, or hurricane
D. All of the above ✔Correct Answers--D. All of the above
When evaluating the moisture content of existing roof assemblies, non destructive moisture
evaluation techniques like _____ should NOT be used.
A. Electrical capacitance
B. Infrared thermography
C. Pin-type moisture meter
D. Neutron thermalization ✔Correct Answers--C. Pin-type moisture meter
Cold-applied bitumens should be applied at a rate of ____ gallons per square.
A. 1
B. 2
C. 3
D. 4 ✔Correct Answers--C. 3
Any person, firm corporation, or agent who violates a provision of this code or the technical codes
shall be guilty of a _____ misdemeanor.
A. Class 1
B. Class 2
C. Class 3
D. None of the above ✔Correct Answers--C. Class 3
Slate shingles shall be installed only on roof decks having a slope of ____ or greater.
A. 2:12
B. 2 1/2:12
C. 3:12
D. 4:12 ✔Correct Answers--D. 4:12
Fastening of full-length three tab strip shingles requires a minimum of ____ roofing nails per strip
shingle.
A. 4
B. 6
C. 8
D. 32 ✔Correct Answers--A. 4
The _____ method recognizes income when the employer has received it.
