(TSS) EXAM STUDY GUIDE 2026 COMPLETE
QUESTIONS WITH CORRECT DETAILED ANSWERS ||
100% GUARANTEED PASS
<LATEST VERSION>
1. When hook-suspended personnel platforms are lifted with a telescopic boom
crane, - ANSWER ✔ An anti two-block devise must be provided
2. When using a telescopic boom crane equipped with an anti two-block
device, which hydraulic functions are disabled when the device is activated?
- ANSWER ✔ Hoist, extend the boom, boom down
3. The safest maximum speed for a telescopic boom crane performing pick-
and-carry operations is - ANSWER ✔ The manufacturer's recommended
speed limit
4. When using blocking under the outrigger floats/pads, the operator should
make sure the blocking is - ANSWER ✔ Sufficient to support/stabilize the
crane
5. When a boom extension is in the stowed position, it is - ANSWER ✔ Pinned
to the boom base section
, 6. When a telescopic boom crane is engaged in a pick-and-carry operation, the
rated tipping capacity is based on what percentage of the total tipping
capacity? - ANSWER ✔ 75%
7. According to OSHA 1926 sub-part cc, all telescopic boom cranes must be
equipped with - ANSWER ✔ A boom angle indicator
8. Jib capacities are based on: - ANSWER ✔ structural strength
9. When lifting over a corner, ground pressure generated by the crane can
approach a weight that is - ANSWER ✔ equal to the weight of the crane and
suspended load
10.What is the purpose of the boom length indicator? - ANSWER ✔ Indicates
the extended length of the boom
11.boom - ANSWER ✔ 26 ft. To 68 ft. (7.93m to 20.73m), inverted-T cross
section, 3-section telescoping type, extended and retracted crowd system.
Maximum tip height 79ft. (24.09m)
12.Boom point - ANSWER ✔ Two high-density nylon sheaves mounted on
heavy duty roller besrings. Two removeable pin-type rope gaurds.
13.Hoist - ANSWER ✔ Maximum theoretical line speed 247 fpm (75.29 mpm)
maximum theoretical bottom-layer line pull 12,000lbs (5,443kg) two speed
planetary reducer. Spring-applied pressure released internal brake.