CTS-I (2025) comprehensive questions and
verified detailed solutions ALREADY A+ GRADED
HIGHLY RECOMMENDED|100% CORRECT!!
Save
Terms in this set (29)
What is the total c. 65ohms
impedance (rounded) of
10 loudspeakers tapped at
7.5w each in a 70v,
distributed system?
a. 128 ohms
b. 80 ohms
c. 65 ohms
d. 8 ohms
An amplifier can supply d. 4
100w at 2 ohms. How
many 8 ohm speakers can
be wired in parallel
without exceeding the
capabilities of amplifier?
a. 2
b. 3
c. 1
d. 4
, Before audiovisual b. The site must be clean and dust free
equipment can be
brought to a site what
MUST occur?
a. General contractor must
obtain a CO
b. The site must be clean
and dust free
c. All cable must be
installed
d. The rack must be wired
Which device is used to d. A video test generator (VTG)
verify signal integrity
throughout a video
system?
a. A volt meter to check
resistance
b. A multi-meter
c. A Video Optimization
meter (VOM)
d. A video test generator
(VTG)
Why is it essential to have c. It provides a uniform standard of quality
hardware of the correct
grade when preparing to
mount projectors, screens,
or any assemblies?
a. They detract from
installation appearance
b. It is more cost effective
c. It provides a uniform
standard of quality
d. To ensure that the steel
is not tempered
verified detailed solutions ALREADY A+ GRADED
HIGHLY RECOMMENDED|100% CORRECT!!
Save
Terms in this set (29)
What is the total c. 65ohms
impedance (rounded) of
10 loudspeakers tapped at
7.5w each in a 70v,
distributed system?
a. 128 ohms
b. 80 ohms
c. 65 ohms
d. 8 ohms
An amplifier can supply d. 4
100w at 2 ohms. How
many 8 ohm speakers can
be wired in parallel
without exceeding the
capabilities of amplifier?
a. 2
b. 3
c. 1
d. 4
, Before audiovisual b. The site must be clean and dust free
equipment can be
brought to a site what
MUST occur?
a. General contractor must
obtain a CO
b. The site must be clean
and dust free
c. All cable must be
installed
d. The rack must be wired
Which device is used to d. A video test generator (VTG)
verify signal integrity
throughout a video
system?
a. A volt meter to check
resistance
b. A multi-meter
c. A Video Optimization
meter (VOM)
d. A video test generator
(VTG)
Why is it essential to have c. It provides a uniform standard of quality
hardware of the correct
grade when preparing to
mount projectors, screens,
or any assemblies?
a. They detract from
installation appearance
b. It is more cost effective
c. It provides a uniform
standard of quality
d. To ensure that the steel
is not tempered
