NSC LIFT TRUCK OPERATOR EXAM B FREE
DOWNLOAD PDF / NSC Lift Truck Operator
Exam B | Updated 2025 Questions & Verified
Correct Answers
a.10 feet - ---✔✔✔ANSWER----1. Whats is the minimum safe approach
distance (MSAD) with power line.
b. Maintain 3 point of contact facing the lift truck - ---✔✔✔ANSWER----2.
When mounting and dismounting from a lift truck.
, a. Use a spotter - ---✔✔✔ANSWER----3. What you should do if you are
driving through an area and your view is blocked.
B. No - ---✔✔✔ANSWER----4. You need to pick up a pallet and stack it on
another pallet. The pallet weighs 3.800 pounds. Your lift truck has a capacity of
3.500 . Can you move this pallet.
C. Have been trained and authorized by your employer for your lift truck. - ---
✔✔✔ANSWER----5. You should NOT drive a lift truck until you....
C. Follow your facility procedures for taking the lift truck out service. - ---
✔✔✔ANSWER----6. What should you do if you discover a defect during a
pre-shift safety inspection ?
A. Conditions in the work place change.
B. The operator is assigned to a different lift truck.
C. The operator has been observed in an incident or near miss incident.
D. All the above - ---✔✔✔ANSWER----7. Refresher training is required
when..?
B. As low to the ground as possible given worksite conditions. - ---
✔✔✔ANSWER----8. What's the correct amount of distance you should
have between the load and the floor/ground while driving.
DOWNLOAD PDF / NSC Lift Truck Operator
Exam B | Updated 2025 Questions & Verified
Correct Answers
a.10 feet - ---✔✔✔ANSWER----1. Whats is the minimum safe approach
distance (MSAD) with power line.
b. Maintain 3 point of contact facing the lift truck - ---✔✔✔ANSWER----2.
When mounting and dismounting from a lift truck.
, a. Use a spotter - ---✔✔✔ANSWER----3. What you should do if you are
driving through an area and your view is blocked.
B. No - ---✔✔✔ANSWER----4. You need to pick up a pallet and stack it on
another pallet. The pallet weighs 3.800 pounds. Your lift truck has a capacity of
3.500 . Can you move this pallet.
C. Have been trained and authorized by your employer for your lift truck. - ---
✔✔✔ANSWER----5. You should NOT drive a lift truck until you....
C. Follow your facility procedures for taking the lift truck out service. - ---
✔✔✔ANSWER----6. What should you do if you discover a defect during a
pre-shift safety inspection ?
A. Conditions in the work place change.
B. The operator is assigned to a different lift truck.
C. The operator has been observed in an incident or near miss incident.
D. All the above - ---✔✔✔ANSWER----7. Refresher training is required
when..?
B. As low to the ground as possible given worksite conditions. - ---
✔✔✔ANSWER----8. What's the correct amount of distance you should
have between the load and the floor/ground while driving.
