Asbestos Worker EXAM 2026-2027 LATEST
VERSION QUESTIONS AND VERIFIED CORRECT
ANSWERS JUST RELEASED
What type of polyethylene is used when sealing windows, doors and HVAC vents during
abatement projects? - answer>>>6 mil poly
What must you do to a Events and air ducts inside the work area? - answer>>>Two
layers of 6 mil poly
Ideally, what should be done to the electrical supply in/near the work area before
abatement begins? - answer>>>Lock out, Tag out =LOTO
De-energize
What is the primary function of a decontamination unit? - answer>>>To clean the
asbestos off the worker and to keep fibers inside the containment
When must a decontamination unit be kept under negative pressure? - answer>>>At all
times and until a final clearance sample is passed
What happens in the clean room when entering containment? - answer>>>Remove
street clothes, put on swim trunks or disposable underwear, and all personal protective
equipment
What happens in the equipment room when exiting containment? - answer>>>Remove
everything except for your respirator
What is the load-out area used for? - answer>>>It is a holding area for your double
bagged asbestos waste
When shall you establish a regulated area? - answer>>>And workers are likely to be
exposed at or above the PEL you must have a regulated area
A mini enclosure is built for how many workers - answer>>>Up to two workers
What are you looking for when checking the results of asbestos bulk testing? -
answer>>>Quantity (%)
, Specific type of asbestos
What are you looking for when checking asbestos containing material (ACM) ? -
answer>>>Hardness and texture
Its ability to absorb water
What are you looking for when checking the area to be abated? - answer>>>Hazards
that could cause injury
And many other answers
What must be done if there are others Working in the general area you are working? -
answer>>>Regulations mandate that all other contractors on site must be notified
before abatement begins
Be sure to check for any_________ in isolating the areas to be abated -
answer>>>Difficulties
What are some ways you could document any existing damage(s)? - answer>>>Photo
Video
Notes
Lists
Diagrams
What must be done with stationery items that cannot be removed from the work area?
- answer>>>Cover with 6 mil poly and tape
What grade air is used for SAR/Type C respirator? - answer>>>Grade D
According to good work practices, when my supplied air respirators be used? -
answer>>>Type C/supplied air respirator is required when it's gross removal begins
through the final cleanup
Where can I supplied air come from? - answer>>>Compressor
Uncontaminated environment
Tank
What level of oxygen is required for supplied air systems? - answer>>>19.5-23.5%
VERSION QUESTIONS AND VERIFIED CORRECT
ANSWERS JUST RELEASED
What type of polyethylene is used when sealing windows, doors and HVAC vents during
abatement projects? - answer>>>6 mil poly
What must you do to a Events and air ducts inside the work area? - answer>>>Two
layers of 6 mil poly
Ideally, what should be done to the electrical supply in/near the work area before
abatement begins? - answer>>>Lock out, Tag out =LOTO
De-energize
What is the primary function of a decontamination unit? - answer>>>To clean the
asbestos off the worker and to keep fibers inside the containment
When must a decontamination unit be kept under negative pressure? - answer>>>At all
times and until a final clearance sample is passed
What happens in the clean room when entering containment? - answer>>>Remove
street clothes, put on swim trunks or disposable underwear, and all personal protective
equipment
What happens in the equipment room when exiting containment? - answer>>>Remove
everything except for your respirator
What is the load-out area used for? - answer>>>It is a holding area for your double
bagged asbestos waste
When shall you establish a regulated area? - answer>>>And workers are likely to be
exposed at or above the PEL you must have a regulated area
A mini enclosure is built for how many workers - answer>>>Up to two workers
What are you looking for when checking the results of asbestos bulk testing? -
answer>>>Quantity (%)
, Specific type of asbestos
What are you looking for when checking asbestos containing material (ACM) ? -
answer>>>Hardness and texture
Its ability to absorb water
What are you looking for when checking the area to be abated? - answer>>>Hazards
that could cause injury
And many other answers
What must be done if there are others Working in the general area you are working? -
answer>>>Regulations mandate that all other contractors on site must be notified
before abatement begins
Be sure to check for any_________ in isolating the areas to be abated -
answer>>>Difficulties
What are some ways you could document any existing damage(s)? - answer>>>Photo
Video
Notes
Lists
Diagrams
What must be done with stationery items that cannot be removed from the work area?
- answer>>>Cover with 6 mil poly and tape
What grade air is used for SAR/Type C respirator? - answer>>>Grade D
According to good work practices, when my supplied air respirators be used? -
answer>>>Type C/supplied air respirator is required when it's gross removal begins
through the final cleanup
Where can I supplied air come from? - answer>>>Compressor
Uncontaminated environment
Tank
What level of oxygen is required for supplied air systems? - answer>>>19.5-23.5%
